연구목적: 치과 영역에서 환자들의 심미적인 요구가 증가하면서 자연 치아의 색조를 재현할 수 있는 수복물의 개발이 이루어졌으며, 이러한 연구의 일환으로 도재와 복합레진의 특성을 겸비한 Ceromer(Ceramic Optimized Polymer)가 개발되었다. Ceromer는 기존의 복합레진에 무기질을 고밀도로 충전하여 물리적 성질을 향상시켰다. 연구 재료 및 방법:본 실험에서는 두 종류의 Ceromer[$Targis^{(R)}$(Ivoclar-vivadent AG., Schaan, Liechtenstein), $BelleGlass^{(R)}$(Kerr Co., Orange, CA, USA)]를 이용해 레진 전장관 형태의 시편을 제작하고 증류수에 침전한 후 발생하는 체적과 중량의 변화를 관찰하였다. 결과 및 결론:두 종류의 Ceromer 모두 수중 침적 시간이 증가할수록 높이와 폭이 증가되었으며, $Targis^{(R)}$보다 $BelleGlass^{(R)}$에서 더 큰 누적변화율을 보였다. 72시간까지 급격한 증가를 보이다 이후 누적변화율의 증가는 감소하였다. 통계적 분석결과 $Targis^{(R)}$의 높이와 무게의 누적 변화량이 24시간군과 나머지군 사이에 유의한 차이를 보였으며, $BelleGlass^{(R)}$에서는 폭과 무게에서 누적 변화량이 24시간군과 나머지군 사이에 유의한 차이를 보였다(<.05). $Targis^{(R)}$와 $BelleGlass^{(R)}$ 두 군간의 비교에서는 높이, 폭, 무게의 변화량은 통계적으로 유의한 차이를 보이지 않았으나 변화양상은 다르게 관찰되었다.
Mar-M-247 합금은 고온에서의 우수한 강도로 Ni기 초내열합금 중 항공용 가스터빈 부품에 가장 널리 사용되는 소재 중 하나이다. Mar-M-247을 이용하여 터빈 노즐, 터빈 블레이드와 같이 Hot section 용으로 제작되는 부품은 복잡한 형상 등의 이유로 접합 공정을 적용하고 있다. 본 연구에서는 Mar-M-247 합금의 액상확산접합부에 대한 고온 특성 거동을 고찰하고자 하였다. 이에, $1,121^{\circ}C$에서 7분간 확산접합을 실시하여 고온 강도 변화를 관찰하였다. 시험 결과, 접합 시편은 $649^{\circ}C$에서 모재 대비 약 70%, $825^{\circ}C$에서 약 60%, $1,000^{\circ}C$에서 약 45%의 강도치를 나타내었다. 접합시간에 따른 강도 변화를 관찰한 결과, 720분 접합한 시편은 $649^{\circ}C$에서 모재와 유사한 강도치를 나타내었으며, 이는 One-body 부품에 가까운 일체형 확산 접합이 이루어진 것으로 판단된다.
가열인장(heating and pulling)방법을 이용하여 개구부 직경이 약 100nm 이하인 광섬유 탐침을 제작하였으며, 이를 이용하여 일정광량 방식의 광자주사현미경을 제작하였다. 광섬유 탐침을 물체에 미세하게 접근시켜서 물체면을 주사하기 위하여 원통형 PZT(piezoelectric transducer)를 x-y-z의 3부분으로 나누어 z축의 미세접근 및 1.43$\mu\textrm{m}$$\times$ 1.76$\mu\textrm{m}$의 면적을 x-y축으로 주사할 수 있는 3차원 PZT 주사기를 제작하였다. 그리고 광섬유 탐침에서 검출되는 에바네슨트라의 광량이 항상 일정하도록 전자적인 되먹임 회로에 의한 광섬유 탐침이 1$\lambda$ ($\lambda$ 는 입사파장임) 이하의 근접장 영역에서 물체로부터의 높이가 일정하도록 하였다. 그리고 이렇게 제작된 일정광량 모드의 광자주사 현미경을 이용하여 정상파 형태의 에바네슨트파를 측정하였다.
The effect of moistening and air-drying of acid-conditioned dentin before priming on the formation of resin-dentin hybrid zone was investigated, Freshly extracted human molars were used and divided at random into 5 groups, Groups 1 - 3 consisted of specimens conditioned with 10 % phosphoric acid for 20 seconds; Group 1 served as a control in which the conditioned dentin was simply blot-dried with a damp facial tissue; Group 2 was air dried for 30 seconds ; Group 3 was air dried for 30 seconds and immediately remoistened for 10 seconds with air-water syringe. and then the specimen was blot-dried with a damp facial tissue. Groups 4-5 were not acid conditioned ; In group 4, the smear layer on the dentin was blot dried before primer placement; Group 5 was air dried only for 30 seconds, The acetone-based primer and bonding agent of All Bond 2 (Bisco. Inc., USA) and composite resin (Z-100, 3M Dental products, USA) were applied for acid conditioned dentin and non-conditioned dentin. The morphologic ultrastructure of resin-dentin hybrid zone was examined by the use of SEM and TEM. and the existence of inorganic material and analysis of Ca/P weight-percent ratio in the resin-dentin hybrid zone were revealed by the EDAX, The results were as follows : 1. In the moistened specimens from acid-conditioned groups, the resin penetrated about 3-$4{\mu}m$ into dentin and the denatured collagen smear layer was not present at the surface. The resin tag was formed to a thickeness of 3-$4{\mu}m$ at the upper part of dentinal tubule and compactively connected to each other by means of many lateral branching. 2. In the air-dried specimens from acid-conditioned groups, the resin penetrated about 2.0-$2.5\;{\mu}m$ into dentin and an upper thin black layer to a thickness of 30-35nm was identified between adhesive resin and demineralized collagen layer. The resin tag to have a diameter of $2.5{\mu}m$ was formed at the upper part of dentinal tubule. However the funnel shape of the tag was not notable compared to the moistened specimens. 3. In the remoistened specimens from acid conditioned groups, the resin penetrated about 2.0-$2.5{\mu}m$ into dentin and an upper black layer was not present. The resin tag at the upper part of dentinal tubule was formed less than $2{\mu}m$ and was weakly connected to each other by means of few lateral branching. 4. In the non-conditioned groups, the smear layer was formed to a thickness of $0.5{\mu}m$ at dentin surface. However, the resin-dentin hybrid zone was not identified by TEM. The evidence of resin penetration into intertubular and intratubular dentin did not show. 5. All the acid-conditioned groups showed that the detected calcium and phosphorus weight percent ratios at the $2{\mu}m$ upper portion from the resin-dentin interface into the resin were much higher than that at the $2{\mu}m$ lower portion from the resin-dentin interface to dentin. (P<0.01).
최근, 중단열 벽체의 단열성능 향상을 위해 철과 콘크리트 코어 전단연결재를 열전도율이 낮은 유리섬유복합체 (GFRP)로 전단연결재를 대체하는 연구가 활발히 진행되고 있다. 본 연구는 단열재의 표면처리에 따른 부착력과, GFRP 전단연결재로 보강된 중단열 벽체의 전단내력을 알아보기 위하여 실시되었으며, 각 변수에 따른 영향을 분석함으로써 구조성능에 대한 검증을 실시하였다. 총 13개의 실험체에 대해 직접전단실험을 실시하였으며, 파괴양상 및 하중-상대슬립 관계에 대한 분석을 실시하였다. 실험결과, 기존의 압출법 보온판 (XPS) 단열재에 거친표면처리와 10 mm의 홈을 낸 경우 단열재와 콘크리트사이에 부착력을 향상시킬 수 있으며, 부착력의 기여는 전단연결재의 파단 상대슬립의 영향을 받는 것으로 나타났다. 파형 전단연결재의 폭이 커짐에 따라 강성이 증가하였으며, 보강단면적이 증가함에 따라 최대내력이 증가하였다. 효과적인 보강을 위해서는 파형 전단연결재의 높이와 피치의 비율을 1:2로 산정해야 할 것으로 판단되며, 안정적인 파괴를 위해서는 매립깊이에 대한 검증이 필요할 것으로 사료된다.
역리브 (Inverted multi-tee, 이하 IMT) 슬래브를 제작하기 위해서는 콘크리트를 2번에 걸쳐 타설해야하기 때문에 부재 제작에 상당한 시간이 소요된다는 단점이 있다. 이러한 단점을 극복하기 위하여 최근에는 슬립폼 방식을 활용하여 IMT 슬래브를 제작하는 기술이 새롭게 개발되었다. 이 연구에서는 슬립폼 방식으로 제작된 IMT 슬래브의 구조성능을 평가하기 위한 휨 및 전단 실험을 수행하였다. 이를 위하여 토핑콘크리트가 합성된 휨실험체 1개와 전단실험체 2개를 제작하였으며, 실험체들의 파괴모드 및 균열패턴, 프리캐스트 슬래브와 토핑콘크리트 사이의 슬립을 상세히 계측하고 분석하였다. 또한, 현행구조기준을 활용하여 실험체들의 휨 및 전단강도를 평가하였으며, 상이한 압축강도의 콘크리트로 구성된 합성 IMT 슬래브에 적합한 전단강도 산정방법을 제안하였다. IMT 슬래브의 휨강도는 현행구조기준에서 제시하는 공칭 휨강도를 상회하는 것으로 나타났으며, 제안 전단강도 산정방법은 실험체들의 전단강도를 우수한 정확도로 평가하는 것으로 나타났다.
표면이 매끄럽고 돌기가 있는 2가지 HDPE 지오멤브레인 덤벨형 시료에 두께 10% 간격으로 10~90% 깊이의 노치를 가하여 실험에 사용하였다. ISO 10722에 의거하여 부가하중 횟수를 변화시켜 시공시 손상의 실내 모사시험을 HDPE 지오브레인에 실시하였으며, 부가하중 횟수가 시공시 손상에 미치는 영향을 비교하였다. 항복응력과 변형률은 노지 깊이가 커짐에 따라 감소하였다. 손상된 그리고 노치를 가한 지오멤브레인을 응력균열시험에 사용하였으며, $50{\pm}1^{\circ}C$에서 pH 4와 12 용액에 침지시켜 항복응력 변화에 따른 응력균열저항성을 NCTL 시험을 통하여 고찰하였다. 인장 강도의 35% 이상에서 지오멤브레인은 응력균열에 취약함을 나타냈으며, 손상을 받은 그리고 노치를 가한 지오멤브레인 모두 같은 경향을 나타내었다. 특별히 노치를 가한 지오멤브레인의 경우 각각의 응력균열 조건에서 시공에 의해 손상된 지오멤브레인보다 낮은 강도를 나타내었다.
The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.
콘크리트 충전강관(Concrete Filled Steel Tube, 이하 CFT) 기둥에 사용되는 내다이아프램은 사용 강재량은 적으나 강관과 네 면을 용접해야 하므로 용접이 까다롭고 개구부가 필요한 단점을 가지고 있다. 본 연구에서 살펴보고자하는 개선 다이아프램은 콘크리트 충전을 위한 중앙부 홀을 4등분하여 각 코너부위를 절삭했다. 개선 다이아프램은 중앙부 홀의 넓이는 기존 다이아프램과 동일하지만 강관과 접하는 다이아프램의 폭이 감소하여 용접 길이가 기존 다이아프램 대비 약 70%가 감소된다. 개선 다이아프램의 인장성능을 검토하기 위하여 콘크리트 타설 홀의 반지름인 R값을 설계 변수로 3개의 실험체를 제작하였다. 단순 인장 실험을 통하여 내다이아프램에 동일 하중을 받았을 때 각 실험체의 면내 변형률을 분석하였다. 범용유한요소해석 프로그램을(ANSYS 19.2)를 사용하여 실제 단순 인장 실험과 동일한 조건으로 해석을 수행하고 개선 다이아프램과 기존 다이아프램의 하중 전달을 비교하였다. 다이아프램의 폭이 플랜지 폭과 같거나 작을 때는 다이아프램의 단부에서 부터 응력이 집중되고 플랜지 폭이 더 클 때는 중앙부에서 응력이 집중되는 것을 확인하였다.
철근 콘크리트 구조물에 다양한 종류의 철근 이음 방법이 개발되고 이를 현장에서 적용하여 왔다. 지난 여러 연구들에 따르면 철근의 직경이 굵어지고 철근의 강도가 커질 경우, 원가 효율 면에서 기계적 이음이 겹침이음보다 상대적으로 우수한 것으로 나타났다. 본 연구에서는 철근 콘크리트 구조물의 고강도 철근(SD600)에 대한 에폭시 충전형 기계적 이음장치를 제시하고 실험을 실시하였다. 이형 철근을 원형 튜브형 강재로 된 커플러에 삽입하고 고강도 에폭시 충전재를 커플러 안으로 주입하면 커플러 안에서 충전재가 경화되면서 이음 장치가 구성된다. 에폭시의 압축강도, 커플러의 길이, 철근의 지름 등에 따른 에폭시 충전형 기계적 이음장치에 대한 일방향 인장시험을 수행하였으며, 실험체의 파괴하중 및 파괴 양상을 관찰하였다. 실험 결과, 실험체의 실제 파괴하중은 에폭시 충전재의 예상 파단 내력의 약 2배 이상으로 나타나 강재 커플러의 구속으로 인하여 경화 에폭시 충전재의 파괴하중이 크게 증가했다는 것을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.