한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제24권3호
  • /
  • Pages.80-86
  • /
  • 2020
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

슬립폼 방식으로 제작된 역리브 프리캐스트 슬래브의 구조거동에 대한 실험적 연구

Experimental Study on Structural Behavior of Inverted Multi-Tee Precast Slabs Manufactured by Slipformer

  • 최석동 (연우건축구조기술사사무소) ;
  • 김민석 (서울시립대학교 건축공학과) ;
  • 김강수 (서울시립대학교 건축공학과) ;
  • 홍성엽 ((주)까뮤이앤씨 미래연구소) ;
  • 한선진 (서울시립대학교 건축학부)
  • 투고 : 2020.04.17
  • 심사 : 2020.05.07
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

역리브 (Inverted multi-tee, 이하 IMT) 슬래브를 제작하기 위해서는 콘크리트를 2번에 걸쳐 타설해야하기 때문에 부재 제작에 상당한 시간이 소요된다는 단점이 있다. 이러한 단점을 극복하기 위하여 최근에는 슬립폼 방식을 활용하여 IMT 슬래브를 제작하는 기술이 새롭게 개발되었다. 이 연구에서는 슬립폼 방식으로 제작된 IMT 슬래브의 구조성능을 평가하기 위한 휨 및 전단 실험을 수행하였다. 이를 위하여 토핑콘크리트가 합성된 휨실험체 1개와 전단실험체 2개를 제작하였으며, 실험체들의 파괴모드 및 균열패턴, 프리캐스트 슬래브와 토핑콘크리트 사이의 슬립을 상세히 계측하고 분석하였다. 또한, 현행구조기준을 활용하여 실험체들의 휨 및 전단강도를 평가하였으며, 상이한 압축강도의 콘크리트로 구성된 합성 IMT 슬래브에 적합한 전단강도 산정방법을 제안하였다. IMT 슬래브의 휨강도는 현행구조기준에서 제시하는 공칭 휨강도를 상회하는 것으로 나타났으며, 제안 전단강도 산정방법은 실험체들의 전단강도를 우수한 정확도로 평가하는 것으로 나타났다.

In the fabrication process of inverted multi-tee (IMT) slabs, concrete has to be poured twice due to its shape, which is a huge disadvantage as a precast member. To overcome this, a new technique for manufacturing IMT slabs using a slipform method has been recently developed. In this study, flexural and shear tests were carried out to investigate the structural performances of inverted multi-tee (IMT) slabs manufactured using slipform method. To this end, one flexural specimen and two shear specimens with topping concrete were fabricated, and their failure modes and crack patterns, and the slips that occurred between the precast slab and topping concrete were measured and analyzed in detail. In addition, the flexural and shear strengths of the specimens were evaluated by utilizing the structural design code, and a shear strength estimation method, which is suitable for composite IMT slabs with different concrete properties, was proposed for practical design. The IMT slab satisfied the nominal flexural strength calculated by the current design code, and the proposed method provided a good estimation of the shear strength of the specimens.

키워드

참고문헌

  1. Lee, D. H., Park, M. K., Oh, J. Y., Kim, K. S., Im, J. H., and Seo, S. Y. (2014), Web-Shear Capacity of Prestressed Hollow-Core Slab Unit with Consideration on the Minimum Shear Reinforcement Requirement, Computers and Concrete, 14(3), 211-231. https://doi.org/10.12989/cac.2014.14.3.211
  2. Choi, I. S. (2016), Structural Performance of Precast Slab with Esthetics and Optimized Section for Positive and Negative Moment, Ph.D. Dissertation, Inha University, Incheon, Republic of Korea.
  3. Ghosh, S. K. (1987), Shear Reinforcement Requirements for Precast Prestressed Double-Tee Member, ACI Structural Journal, 84(4), 287-292.
  4. Ju, H., Han, S. J., Choi, I. S., Choi, S., Park, M. K., and Kim, K.S. (2018), Experimental Study on an Optimized-Section Precast Slab with Structural Aesthetics, Applied Sciences, 8(8), 1234. https://doi.org/10.3390/app8081234
  5. Joo, H. E., Han, S. J., Park, M. K., and Kim, K. S. (2020), Shear Tests of Deep Hollow Core Slabs Strengthened by Core-Filling, Applied Sciences, 10(5), 1709. https://doi.org/10.3390/app10051709
  6. Han, S. J., Jeong, J. H., Joo, H. E., Choi, S. H., Choi, S., and Kim, K. S. (2019), Flexural and Shear Performance of Prestressed Composite Slabs with Inverted Multi-Ribs, Applied Sciences, 9(22), 4946. https://doi.org/10.3390/app9224946
  7. Palmer, K. D., and Schultz, A. E. (2011), Experimental investigation of the web-shear strength of deep hollow-core units, PCI Journal, 56(4), 83-104. https://doi.org/10.15554/pcij.09012011.83.104
  8. Hwang, S. B., Seo, S. Y., Lee, K. C., and Lee, S. H. (2016), Shear Capacity of Precast Concrete Triple Ribs Slab, Journal of the Korea Concrete Institute, 28(4), 489-496. https://doi.org/10.4334/JKCI.2016.28.4.489
  9. Korea Concrete Institute (2017), Korea Model Code 2017 (KCI 2017), Korea Concrete Institute, Seoul, Republic of Korea.
  10. ACI Committee 318 (2019), Building Code Requirements for Structural Concrete (ACI 318-19), American Concrete Institute, Farmington Hills, MI, USA.