• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.49-59
• /
• 2010

Earthquake-induced liquefaction on saturated loose sand is well known in the world. Since Saemangeum Dike Project has a plan to be reclaimed with dredged sand on wide river, possibility of liquefaction should be checked. Section Dongjin5 was selected to evaluate possibility of liquefaction. Estimating method follows as 1) determination of PL value with SPT results, passing curve, and soil properties, 2) prediction for maximum earthquake acceleration, 3) calculation for FL value on depth with Korean specification for highway bridges, 4) visualization for possibility of liquefaction on all of project area with GIS 5) comparison with Japanese specification for highway bridges, Youd and Idriss method, and Andrus and Stokoe II method for verification, 6) ascertainment for the potential liquefaction with cyclic triaxial test. 7) establishing for countermeasure if needed. From the results, even though most of area covered with sand, no potential liquefaction exists except some areas. Those need to soil improvement with grout or attaching measurement on substructure.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.85.2-93
• /
• 2000

A demand of marine outfall system have been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model with has been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed vesult was applied to the Pusan Jungang dffluent outfall system plan.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.38-47
• /
• 2013

When building with concrete in cold weather, an insulation method of heat curing must be determined, and a holistic curing plan that considers the characteristics of structures, the heat loss coefficient of a curing sheet, the joint condition of the curing materials and the quantity of heat produced by a heating apparatus is an essential prerequisite for protection against early frost damage. But on a number of national construction sites, there have been serious problems in cold weather concreting due to the unreliability of the information obtained from practical experience. In the construction field in Japan, there is a specification for heat curing prepared by Japanese Architectural Society, which provides an equation for calculating heat quantity. It is also necessary to adopt a detailed specification for a standard heat curing method that is applicable to all national construction sites. In this study, the effect of bubble sheets on the economic feasibility of cold weather concrete is investigated through a comparison with the blue sheets commonly prescribed in national construction sites. In conclusion, this study found that bubble sheets had the effect of reducing the cost of curing materials and the fuel cost consumed by a heating apparatus, compared to the use of blue sheets.

• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.9-16
• /
• 2018

Recently, as various IP set-top boxes based on Android OS have been widely used in general households and public facilities, complaints about services and set-top boxes have continued to increase as much as other smart devices. In order to reduce this problem, the manufacturer performs the testing work before the product is commercialized. However, the testing can reduce potential defects in the product, but it can not prove that the product is free of defects. Therefore, the quality of the product can vary depending on how effective testing techniques are introduced. In this paper, we propose a new exploratory testing method that minimizes test case creation time and makes it easier to plan and execute test while simultaneously learning how to run the product under test. Using the first proposed method, the test time is reduced by about 16.7 hours and the defect detection rate is 25.4% higher than the formal specification-based testing method. Informally, the test time was shortened by about 4.7 hours and the defect detection rate was 13% higher than the informal experience-based testing method.

• 항공우주기술
• /
• 제7권1호
• /
• pp.142-150
• /
• 2008

KSLV-I 발사체에 탑재되는 원격측정시스템, 추적시스템, 비행종단시템, GPS, 관성항법유도시스템의 개별적인 성능과 고홍우주센터 및 제주추적 소에 설치된 지상장비와의 연계성능을 확인하기 위하여 항공기를 이용한 비행시험이 요구된다. 시험에 적용할 탑재장비의 선정, 하니스, 운용방법, 안테나 부착방법 등의 면밀한 계획과 분석을 통해 시험의 효율성이 향상되기 때문에 KSLV-I의 통신환경과 비행프로파일 둥이 비행시험에 최대한 정확하게 고려되어야 한다. 본 논문에서는 KSLV-I 전자탑재장비의 목록과 규격, 비행시험용 랙과 하니스, 항공기 제원, 비행궤적 둥 효과적인 비행시험을 위해 준비 및 분석되어야 하는 전반적인 사항이 제시된다.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.23-34
• /
• 2011

최근의 소프트웨어 개발에서는 리팩토링이 활발하게 이용되고 있다. 리팩토링에 대한 관심이 높아지면서 요소 리팩토링을 정의해서 이들의 조립을 통해 더 큰 종류의 복합 리팩토링을 처리하려는 연구들이 많이 진행되고 있다. 복합 리팩토링은 조합된 요소 리팩토링의 순서대로 처리되기 때문에 프로그램에 실제 적용하기에 앞서 적용 가능성을 판단하는 것이 중요하다. 기존 연구들에서는 요소 리팩토링들의 선 후행조건들로부터 복합 리팩토링에 대한 선행조건을 계산하여 적용 가능성을 판단하고 있다. 이것은 선행조건이 정의되어 있는 복합 리팩토링만 판별할 수 있으며 선행조건이 정의되어 있지 않은 복합 리팩토링에 대해서는 적용 가능성을 판단할 수 없는 문제점이 있다. 본 연구에서는 복합 리팩토링의 명세를 추가로 정의 하지 않고 요소 리팩토링만으로 조립 가능 여부를 판단하고자 한다. 이를 위해 요소 리 팩토링을 명세하는 방법과 조립성 검사 방법을 제안한다. 이를 기반으로 프로토타입 도구를 개발해 보고, 적용사례를 통해 선행조건이 명세되어 있지 않은 복합 리팩토링들의 조립성 검사를 확인해봄으로써 본 연구의 효용성을 검토해본다.

• 한국실내디자인학회논문집
• /
• 제24권4호
• /
• pp.143-151
• /
• 2015

This study was conducted under the premise that the university library's subject specialization room is in need of major modifications in order to accommodate the needs of various majors. The subject specialization room will be able to support university library users who are inclined to use the general reading room. Therefore, the study presents spatial planning for the average university library's subject specialization room by taking into account student majors. This could be a guideline for the construction and renovation of university libraries in the future. The summary of results for this study and the conclusions are as follows: 1)Natural sciences subject specialization room should be, partially connected with the humanities/social science subject specialization room in order to provide an open-concept reference room. In the shared area connecting the two subject specialization rooms needs to be installed a staff counter and subject specialist librarian service booth for users of both subject specialization rooms. 2)For humanities/social sciences subject specialization room, partially connect with the natural sciences subject specialization room. In the connecting area between the two rooms, plan an open-concept lounge for resting and reading. 3)It is best to plan subject specialization room for art/music/physical education majors separate from the subject specification room of other majors. Structurally separate art/music/physical education major subject specialization rooms from the building or plan a separate room in an art/music/physical education building. Users of art/music/physical education majors showed a high preference for a spatially separated and specialized library structure, which proves that an art/music/physical education library need to be planed based on the specialized library structure found in law school libraries or medical school libraries. Plan the center of the room with open-concept based reading room. Use wall-sides, partitions, or shelves to create reading space separate from the shelving area.

• 한국문헌정보학회지
• /
• 제55권2호
• /
• pp.227-261
• /
• 2021

본 연구의 목적은 학교도서관 평가 실태를 분석하여 학교도서관 평가의 발전 방향에 대한 시사점을 얻으려는 데에 있다. 이를 위해 교육부, 교육청 및 문화체육관광부를 중심으로 수행되는 학교도서관 관련 조사, 컨설팅 및 평가를 메타평가를 활용하여 분석하고, 사서교사를 대상으로 심층 면담 조사를 실시하였다. 분석 결과, 각 기관의 평가 중복, 국가의 학교도서관 발전계획의 반영 미비, 공모형 평가로 인한 참여율 저조, 교육 평가지표 미비 등의 문제점이 발견되었다. 이러한 문제를 해결하기 위한 학교도서관 운영평가의 개선방안은 법률에 평가 주체의 역할 명시, 국가의 도서관 발전계획의 반영, 기관 간 평가 네트워크 구축, 사례 공유 시스템 운영, 교육청의 조사 및 컨설팅과 전국 도서관 운영 평가의 연계 방안 마련을 제안하였다.

• 한국건축시공학회지
• /
• 제5권3호
• /
• pp.91-99
• /
• 2005

It is required to study systematical on the concrete quality management to extend structure life because rebuilding effect is reducing under present condition of large sized and high stories structure. Concrete, which shows its intensity by hydrating action and a big change in quality according to hot weather and temperature, produces a lot of qualify problem under hot and cold weather Because of each specification and construction plan which does not have basic standard on site, concrete's quality is irregular and makes some defect. As a result, Daegu is turned out to be the longest area after investigating application period and days focused on 8 cities weather information about relationship between hot weather circumstance and construction environment. Therefore, we first surveyed the concrete material in the region and found out the problem of quality nanagement. Then figure out the way of solution. Moreover, we integrated concrete material quality management, which is applied differently to each site, to have equal quality and to reduce defect from construction site. And then, based on various test of construction condition and analysis of quality management item, we suggest effective concrete quality management to make concrete material construction standard guide and plan under hot weather.

• 디지털산업정보학회논문지
• /
• 제5권2호
• /
• pp.199-208
• /
• 2009

Mosts of export/import cargo has been moving using maritime transport means. Korea had been driven the system automation project using EDI document since the mid-1990s. However, this automation system comes upon about 40-50% against overall maritime business process, manual or paper document processing work is existing as ever. International e-business environment also has changing into electronic form document transaction from paper document-based transaction. International standardization organization, UN/CEFACT proposed UNeDocs for paperless jtransaction. UNeDocs is a specification to define XML data model as well as electronic form. With UNeDocs, it is not necessary to generate the duplexed data, and it can support user convenient and guarantee the flexibility. This paper defines the UNeDocs data model for EDI and Off-Line processing at the current maritime business. Then, it have to check XML syntax and structure for the defined data model through quality of document check system. Also, it explains the applying plan about the defined UNeDocs data model. It is possible to support paperless transaction as defining UNeDocs-based standard data model and converting into paper document, XML and EDI document using UNeDocs data model.