• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.213-220
• /
• 1999

The life data analysis of the system and component are useful to describe the result of reliability test in product life to satisfy customer's growing need and to change test specifications or design criteria by life data analysis. And vehicle durability tesr occurred market environment. In this study, a statistical analysis for the wear life of brake pad linings helped perform correlation procedure between vehicle durability test and market. B-life values of the brake pad wear life data from both vehicle durability test and marker usage were compared to determine acceleration of the test by the Weibull, normal and log-normal distribution. The acceleration coefficient of the vehicle durability test can access to evaluate design criteria of product and test specification.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.181-193
• /
• 2006

The purpose of this thesis addresses a development of an expert system to support a decision making of the vender selection. The researches related to the vender selection problems have been studied and they provide 23 criteria to select proper venders. In this thesis, 8 criteria have been used to construct a knowledge base of the expert system. The system in this thesis consists of 6 steps in its procedure. Step 1 decides a specification that satisfies customer's needs and Step 2 chooses a part supplied by a vender. The type of an outside order is decided in Step 3 and some venders satisfying the customer's needs are selected in Step 4. Some of the venders chosen from step 4 which do not satisfy the fatal cirteria(that is Quality, Delivery, Price) can be deleted in Step 5. In the last step, 8 cirteria is used to select 3 venders according to their ranking. Consequently, this program provides for a man, who does not have the experiances, an efficient way to select appropriate venders in the vender selection problems.

• The Journal of Information Systems
• /
• v.29 no.3
• /
• pp.1-34
• /
• 2020

Purpose Due to the complexity of policy environment in modern society, it is accepted as common basics of policy design to mix up a variety of policy instruments aiming the multiple functions. However, under the current situation of written-down policy specification, not only the public officers but also the policy researchers cannot easily grasp such frameworks as policy portfolio. The purpose of this study is to develop "Policy Attributes Taxonomy" identifying and classifying the public programs to help making decisions for allocative efficiency with effectiveness-based information. Design/methodology/approach To figure out the main scheme and classification criteria of Policy Attributes Taxonomy which represents characteristics of public policies, previous theories and researches on policy components were explored. In addition, to test taxonomic feasibility of certain information system, a set of "Feasibility Standards" was drawn from "requirements for well-organized criteria" of eminent taxonomy literatures. Finally, current government classification system in the area of social service was tested to visualize the application of Taxonomy and Standards. Findings Program Taxonomy Schemes were set including "policy goals", "policy targets", "policy tools", "logical relation" and "delivery system". Each program and project could be condensed into these attributes, making their design more easily distinguishable. Policy portfolio could be readily made out by extracting certain characteristics according to this scheme. Moreover, this taxonomy could be used for rearrangement of present "Program Budget System" or estimation of "Basic Income".

• Journal of Pharmaceutical Investigation
• /
• v.39 no.3
• /
• pp.161-166
• /
• 2009

This study is to specify the criteria and testing methods of WHW extract which has a potency as a therapeutic agent for chronic renal failure. The determination of specifications of WHW extract is mostly important because of the quality assurance. Three batches of WHW extract were obtained by the extraction at $98^{\circ}$C for 3 hr using water from mixture of 15 herbal medicines including Codonopsis Pilosulae Radix, Salviae Radix, Pinelliae Rhizoma, Coptidis Rhizoma, Evodiae Fructus, Epimedii Herba, Rhei Rhizoma, Perillae Herba, Glycyrrhizae Radix, Artemixiae capillaris Herba, Alimatis Rhizoma, Hoelen, Atractylodies Rhizoma alba, Polyporus and Cinnamomi Ramulus, subsequently, vaccum-dried for 15 hr. The yield of WHW extracts was 24.53% on the average. The identification of each herbal medicine of WHW extract was performed by modification of Korean Pharmacopeia IX (KP IX). The assay of WHW extract was performed using standard such as berberine, icariin, glycyrrhizin, and cinnamic acid of indicative herbal medicines by modification of KP IX, too. As well as, paticle size classification test was carried out to indicate the boundary of particle size of WHW extract and the particle size of WHW extract more than 50% showed the 140 ${\mu}$m. Taken together, WHW extract could be prepared reproducibly and assurable if follows the presented extraction and drying steps and its specifications were satisfied with the indicated criteria.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.561-566
• /
• 2005

This study was carried out to amlyze and compare the stability of a 50ton container crane according to various wind load design codes. The wind load was evaluated according to 'The Specification of Port Facilities and Equipments / Specification for the design of crane structures (KS A 1627)' and 'Load Criteria of Building Structures' effected by the ministry of construction & transportation And the uplift forces qf a container crane under this wind load were estimated by amlyzing reaction forces at each supporting point and compared each other. From this study, we noticed that the design wind velocity criteria need to be defined specifically when the wind load is evaluated to design a container crane. And we verified the necessity of the estimation of the uplift forces at each supporting point to analyze a structural stability of a container crane and the maximum compressive force in order to consider the stability of the ground foundation of the berth.

• Journal of Digital Convergence
• /
• v.9 no.3
• /
• pp.213-223
• /
• 2011

Today, information resource management is key task in the data-centre as like as NCIA(National computing integration Agency of Korea). In IRM, the server's performance is one of the core elements, it must be importantly managed during whole of system life cycle. As first step of such management is in purchase phase, it is very important that the optimum specification is determined. The server's specification contains such as performance of core, criteria for performance verification, minimum cores, etc. There is constant controversy concerning the minimum cores. In this article, we present criteria for determination of the minimum cores that considered three aspects: (1) Costly aspect as TCO(Total Cost of Ownership, (2) Environmental aspect as Green IT (3) Technical aspect as RAS(Reliability, Availability, Serviceability) functionality. Finally, we propose scheme to ideally determinate the minimum cores.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.188-200
• /
• 2002

The WRR scheduling algorithm is widely used in ATM networks due to its simplicity and the low cost of hardware implementation. It guarantees minimum cell rate according to the weight of each queue. The fairness is a important factor for ABR service. That is, scheduling algorithm allocates network resources fairly to each VC. However, WRR algorithm shows worse performance on bursty traffic. Because it schedules input traffics according to predetermined weight, it can not satisfies fairness criteria, MCR plus equal share and Maximum of MCR or Max-Min share, defined by ATM Forum TM 4.1 specification. The Nabeshima et al algorithm is not adapt to network status rapidly because it is not compensate the weights of unused bandwidth to VCs and assign the unused bandwidth to VCs by RR method. In this paper, we propose a scheduling algorithm for satisfying the two fairness criteria, MCR plus equal share and Maximum of MCR or Max-Min share, among the six criteria defined by ATM Forum TM 4.1 specification. The WRR, Nabeshima et al, and the proposed scheduling algorithms are compared with respect to fairness and convergence time throughout experimental simulation. According to the simulation results, the proposed algorithm shows higher fairness and more rapid convergence than other algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.468-477
• /
• 2019

This study analyzed the major contents and results of revision through an analysis of the specifications and the field survey to revise the construction cost calculation criteria. The result of the survey found that the background processing difficulty was reduced due to an improvement of the quality level of the field floor, and the enhancement of the material's function brought a decrease in construction time and the application of various construction methods. In addition, the application of combined waterproofing methods using more than one material was increasing and the productivity differed according to the site and location. Based on these results, waterproof items were subdivided and applied to the composite construction method, and the input items were differentiated according to the material and construction method. The adequacy of the construction calculation criteria was ensured by presenting the criteria classified according to the construction area, and deleting the items that are not applicable and amending them to make them suitable for the specifications by reflecting the actual conditions of the construction on the site.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.2
• /
• pp.65-70
• /
• 2005

Those specifications of the CLIA analytical tolerance limits are consistent with the performance goals in Six Sigma Quality Management. Six sigma analysis determines performance quality from bias and precision statistics. It also shows if the method meets the criteria for the six sigma performance. Performance standards calculates allowable total error from several different criteria. Six sigma means six standard deviations from the target value or mean value and about 3.4 failures per million opportunities for failure. Sigma Quality Level is an indicator of process centering and process variation total error allowable. Tolerance specification is replaced by a Total Error specification, which is a common form of a quality specification for a laboratory test. The CLIA criteria for acceptable performance in proficiency testing events are given in the form of an allowable total error, TEa. Thus there is a published list of TEa specifications for regulated analytes. In terms of TEa, Six Sigma Quality Management sets a precision goal of TEa/6 and an accuracy goal of 1.5 (TEa/6). This concept is based on the proficiency testing specification of target value +/-3s, TEa from reference intervals, biological variation, and peer group median mean surveys. We have found rules to calculate as a fraction of a reference interval and peer group median mean surveys. We studied to develop total error allowable from peer group survey results and CLIA 88 rules in US on 19 items TP, ALB, T.B, ALP, AST, ALT, CL, LD, K, Na, CRE, BUN, T.C, GLU, GGT, CA, phosphorus, UA, TG tests in chematology were follows. Sigma level versus TEa from peer group median mean CV of each item by group mean were assessed by process performance, fitting within six sigma tolerance limits were TP ($6.1{\delta}$/9.3%), ALB ($6.9{\delta}$/11.3%), T.B ($3.4{\delta}$/25.6%), ALP ($6.8{\delta}$/31.5%), AST ($4.5{\delta}$/16.8%), ALT ($1.6{\delta}$/19.3%), CL ($4.6{\delta}$/8.4%), LD ($11.5{\delta}$/20.07%), K ($2.5{\delta}$/0.39mmol/L), Na ($3.6{\delta}$/6.87mmol/L), CRE ($9.9{\delta}$/21.8%), BUN ($4.3{\delta}$/13.3%), UA ($5.9{\delta}$/11.5%), T.C ($2.2{\delta}$/10.7%), GLU ($4.8{\delta}$/10.2%), GGT ($7.5{\delta}$/27.3%), CA ($5.5{\delta}$/0.87mmol/L), IP ($8.5{\delta}$/13.17%), TG ($9.6{\delta}$/17.7%). Peer group survey median CV in Korean External Assessment greater than CLIA criteria were CL (8.45%/5%), BUN (13.3%/9%), CRE (21.8%/15%), T.B (25.6%/20%), and Na (6.87mmol/L/4mmol/L). Peer group survey median CV less than it were as TP (9.3%/10%), AST (16.8%/20%), ALT (19.3%/20%), K (0.39mmol/L/0.5mmol/L), UA (11.5%/17%), Ca (0.87mg/dL1mg/L), TG (17.7%/25%). TEa in 17 items were same one in 14 items with 82.35%. We found out the truth on increasing sigma level due to increased total error allowable, and were sure that the goal of setting total error allowable would affect the evaluation of sigma metrics in the process, if sustaining the same process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.918-922
• /
• 2007

Aero-pulsation noise, generally caused by geometric asymmetry of a rotating device, is considerable source of annoyance in passenger cars using the turbocharged diesel engine. Main source of this noise is the compressor wheel in the turbocharger system, and can be reduced by after-treatment such as silencers, but which may increase the manufacturing cost. More effective solution is to improve the geometric symmetry over all, or to control the quality of components by sorting out inferior ones. The latter is more effective and reasonable than the former in view of manufacturing. So, an appropriate discrimination method should be needed to evaluate aero-pulsation noise level at the production line. In this paper, we introduce the accurate method which can measure the noise level of aeropulsation and also present its evaluation criteria. Besides verifying the reliability of a measurement system - a rig test system -, we analyze the correlation between the results from rig tests and those from vehicle tests. The gage R&R method is carried out to check the repeatability of measurements over 25 samples. From the result, we propose the standard specification which can discriminate inferior products from superior ones on the basis of aero-pulsation noise level.