• 제목/요약/키워드: Specific root length

검색결과 65건 처리시간 0.021초

녹색기술 무배수구 용기깊이와 슬릿(Slit)차이에 따른 디펜바키아 마리안느와 렉스 베고니아의 생육반응 (Growth Responses of Dieffenbachia amoena 'Marianne' and Begonia rex to Different Lengths and Numbers of Slitwalls in Drainless Containers for Green Technology)

  • 주진희;윤용한
    • 한국환경과학회지
    • /
    • 제21권8호
    • /
    • pp.931-938
    • /
    • 2012
  • The effects were investigated of different lengths and numbers of slitwalls in drainless containers on growth and change in soil moisture volumes on the growth of Diffenbachia amoena 'Marianne' and Begonia rex. Drainless containers filled with amended soil, with square shape ($240mm{\times}240mm$) were used, as well as three different sets of slitwalls (2, 4 or 8, respectively) in addition to non-slitwall containers. Two indoor foliage plants were grown in slitwall containers in randomized blocks with 3 replications in greenhouse conditions, from March to September, 2009. Soil moisture volumes per container were measured by weighing containers every 2 hours during the day. The change in soil moisture volumes showed considerable differences among slitwalls tested in comparison to control containers before and after twice-weekly irrigation. Particularly, the differences in the S2 (195mm, slitwall 2) containers were significantly greater than other containers tested. For Diffenbachia amoena 'Marianne', plant height, length of leaf, dry weight and fresh weight were higher with S2 containers than with those grown in other containers tested. The Begonia rex with the best quality in terms of plant height, length of leaf and width of leaf was grown in S8 (360mm, slitwall 8) containers. Particularly, statistical analysis has indicated that shoot fresh weights of Begonia rex grown in S8 were 3-fold higher than those grown in CS8 containers. The different results obtained within the two species led us to hypothesize a species-specific influence on indoor foliage plant performance. However, plants of both species grown in slitwall containers showed good results compared with plants grown in non-slitwall containers.

G-induced Loss of Consciousness(G-LOC) 예측을 위한 신체 부위별 Electromyogram(EMG) 신호 분석 (Analysis on Electromyogram(EMG) Signals by Body Parts for G-induced Loss of Consciousness(G-LOC) Prediction)

  • 김성호;김동수;조태환;이용균;최부용
    • 한국군사과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.119-128
    • /
    • 2017
  • G-induced Loss of Consciousness(G-LOC) can be predicted by measuring Electromyogram(EMG) signals. Existing studies have mainly focused on specific body parts and lacked of consideration with quantitative EMG indices. The purpose of this study is to analyze the indices of EMG signals by human body parts for monitoring G-LOC condition. The data of seven EMG features such as Root Mean Square(RMS), Integrated Absolute Value(IAV), and Mean Absolute Value(MAV) for reflecting muscle contraction and Slope Sign Changes(SSC), Waveform Length (WL), Zero Crossing(ZC), and Median Frequency(MF) for representing muscle contraction and fatigue was retrieved from high G-training on a human centrifuge simulator. A total of 19 trainees out of 47 trainees of the Korean Air Force fell into G-LOC condition during the training in attaching EMG sensor to three body parts(neck, abdomen, calf). IAV, MAV, WL, and ZC under condition after G-LOC were decreased by 17 %, 17 %, 18 %, and 4 % comparing to those under condition before G-LOC respectively. Also, RMS, IAV, MAV, and WL in neck part under condition after G-LOC were higher than those under condition before G-LOC; while, those in abdomen and calf part lower. This study suggest that measurement of IAV and WL by attaching EMG sensor to calf part may be optimal for predicting G-LOC.

Development and validation of a computational multibody model of the elbow joint

  • Rahman, Munsur;Cil, Akin;Johnson, Michael;Lu, Yunkai;Guess, Trent M.
    • Advances in biomechanics and applications
    • /
    • 제1권3호
    • /
    • pp.169-185
    • /
    • 2014
  • Computational multibody models of the elbow can provide a versatile tool to study joint mechanics, cartilage loading, ligament function and the effects of joint trauma and orthopaedic repair. An efficiently developed computational model can assist surgeons and other investigators in the design and evaluation of treatments for elbow injuries, and contribute to improvements in patient care. The purpose of this study was to develop an anatomically correct elbow joint model and validate the model against experimental data. The elbow model was constrained by multiple bundles of non-linear ligaments, three-dimensional deformable contacts between articulating geometries, and applied external loads. The developed anatomical computational models of the joint can then be incorporated into neuro-musculoskeletal models within a multibody framework. In the approach presented here, volume images of two cadaver elbows were generated by computed tomography (CT) and one elbow by magnetic resonance imaging (MRI) to construct the three-dimensional bone geometries for the model. The ligaments and triceps tendon were represented with non-linear spring-damper elements as a function of stiffness, ligament length and ligament zero-load length. Articular cartilage was represented as uniform thickness solids that allowed prediction of compliant contact forces. As a final step, the subject specific model was validated by comparing predicted kinematics and triceps tendon forces to experimentally obtained data of the identically loaded cadaver elbow. The maximum root mean square (RMS) error between the predicted and measured kinematics during the complete testing cycle was 4.9 mm medial-lateral translational of the radius relative to the humerus (for Specimen 2 in this study) and 5.30 internal-external rotation of the radius relative to the humerus (for Specimen 3 in this study). The maximum RMS error for triceps tendon force was 7.6 N (for Specimen 3).

입구유동 가진이 있는 층류 후향계단 유동에서 열전달에 대한 프란틀수 효과해석 (Effects of Prandtl Numbers on Heat Transfer of Backward-Facing Step Laminar Flow with a Pulsating Inlet)

  • 김원현;박태선
    • 대한기계학회논문집B
    • /
    • 제36권9호
    • /
    • pp.923-930
    • /
    • 2012
  • 입구유동 가진이 있는 층류 후향계단 유동에서 Pr수의 변화에 따른 열전달 특성변화를 조사하기 위하여 비정상 수치해석을 수행하였다. 입구는 가진주파수와 가진진폭의 변화에 따른 교란이 주어졌고, 온도함수의 물성치가 적용되었다. 열전달 변화에 대한 다양한 특징들이 열경계층 변화에 의해서 설명되었다. 물성치가 일정한 경우와 비교하였을 때, 물성치가 온도의 함수성이 있는 경우 Pr < 1인 조건에서 열전달은 감소하였고, 반대로 Pr > 1인 조건에서 열전달은 증가하였다. 또한 가진진폭이 증가함에 따라 계단 후류 바닥면에서 열전달도 증가하였다. 그렇지만 가진주파수 변화의 경우 St < 0.2인 조건에서 열전달이 크게 증가하는 특정주파수 영역이 존재하였다. 특히, 열전달의 증가는 재부착 길이의 rms값의 변동정도와 밀접한 관련이 있음을 보여주었다.

이방성재료에 대한 코스틱스법의 적용 (Application of the Method of Caustics into Anisotropic Materials)

  • 백명철;최선호;황재석;김원현
    • 대한기계학회논문집
    • /
    • 제16권12호
    • /
    • pp.2226-2240
    • /
    • 1992
  • 본 연구에서는 이방성체에 대한 구체적인 코스틱스 실험법을 확립하기 위하여 다음과 같은 연구를 수행 하였다. 첫째, 이방성체에 대한 코스틱스상 및 초기곡선의 사상방정식을 기하광학 및 Sih의 응력장을 이용하여 구하고, 이 식에 의한 이론상을 여러가지 경계조건하에서 컴퓨터 그래픽 하여 유도한 사상방정식의 타당성을 검토 하 였다.둘째, 본 논문에서 개발한 두 가지 종류의 직교이방성체를 사용하여 실험을 수행하고 실험에 의한 코스틱스상을 이론상과 비교, 검토 하였다.셋째, 이방성체의 코스틱스상으로부터 응력확대계수를 구하는 방법을 제시하고 이 방법을 실제 시편에 적용하여 신뢰 할수 있는 결과를 얻는 초기곡선의 범위를 결정 하였다. 그리고 이 범위에서 구한 응력확대 계수 값을 경계요소법을 이용한 변위외삽법에 의한 결과와 비 교함으로써 본 논문에서 제시하는 방법이 이방성체의 응력확대계수를 구하는 한 방법 으로 유효하게 사용될 수 있음을 밝혔다.

18S rDNA를 이용한 인삼(Panax ginseng)의 내생균근 균의 동정 (Identification of Arbuscular Mycorrhizal Fungi Colonizing Panax ginseng Using 18S rDNA Sequence)

  • 어주경;김동훈;정현숙;엄안흠
    • Applied Biological Chemistry
    • /
    • 제47권2호
    • /
    • pp.182-186
    • /
    • 2004
  • 아바스큘라 내생균근(arbuscular mycorrhizae, AM) 균은 대부분의 육상식물 뿌리와 공생하며, 식물의 성장에 도움을 주는 균이다. 인삼은 다년생 식물로서 뿌리를 약재로 사용하는 대표적인 약재 중 하나이다. 본 연구에서는 우리나라 8개 지역에서 인삼을 채집하여 AM 균을 염색을 통하여 형태적으로 관찰하고, 분자생물학적인 방법을 사용하여 뿌리내에 공생하는 다양한 AM 균을 확인하였다. 인삼의 뿌리에 감염되어 있는 AM 균을 염색하여 형태적으로 관찰한 결과 감염률이 낮고 흐리게 염색되었다. 또한 균사와 vesicle 이 발견되었고 이들은 Arum type 으로 판단되지만 arbuscule을 관찰하지 못했기 때문에 Arum-type으로 단정하기는 어려웠다. 식물 내에 공생하는 AM균들의 종류를 확인하기 위하여 채집된 인삼의 뿌리에서 내생균근 균의 DNA를 AM균에 특이적인 18s rDNA primer를 이용한 nested PCR을 수행하여 AM 균의 18S rDNA중 일부를 확보하였다. 증폭된 DNA는 클로닝을 통해서 개별 내생균근 균 종의 염기서열들로 분리하였고, 이들은 AluI, HinfI과 같은 제한 효소를 사용하여 RELP하였다. RELP 패턴에 따라 그룹을 나누어, 각 그룹에서 1개씩 염기서열 분석을 수행하였다. 염기서열은 기존의 서열과의 유사성과 계통 관계의 분석을 통하여 모두 AM균인 것으로 확인되었고, 다음 2개의 종과 가장 유사한 것으로 판단되었다; Paraglomus brasilianum, Glomus spurcum이 중 Paraglomus에 속하는 종인 P. brasil-ianum. 이 인삼의 뿌리에서 공통적으로 관찰되어 이들 균과 인삼과의 특이적 관계에 관하여 추측할 수 있었고, G. spurcum은 유사한 것으로 분석된 염기서열들이 계통도 상에서 특이한 분지를 형성하는 것으로 나타났는데, 이들 분지에 대해서는 확충된 염기서열들과 비교 분석과 같은 연구가 필요한 것으로 생각된다.

임간재배 시 병풍쌈 유묘의 차광처리별 생장 및 생리 반응 (The Growth and Physiological Responses of Cacalia firma Seedlings by Shading Conditions in Forest Farming)

  • 윤준혁;전권석;송기선;박용배;문용선;이도형
    • 한국산림과학회지
    • /
    • 제103권1호
    • /
    • pp.65-71
    • /
    • 2014
  • 병풍쌈(Cacalia firma)은 병풍취라고도 하며 초롱꽃목 국화과에 속하는 다년생 식물로 한국, 중국, 일본에 분포되어있다. 웰빙 삶을 위한 생활식습관의 변화에 따라 기능성 식품과 유기농 채소에 대한 소비자의 요구가 증가하고 있다. 본 연구는 병풍쌈 임간재배를 위한 적정 광조건을 구명하기 위해 1년생 병풍쌈에 대해 차광망을 이용하여 4가지 광조건 25%, 55%, 75%와 95% 차광처리(전광의 50%, 30%, 20%, 10% 상대광도)와 대조구(전광)에서 생육 후 초기 생장과 생리적 반응을 조사 분석하였다. 75% 차광처리구는 대조구와 비슷한 초장, 뿌리생육과 함수율을 보였으나, 잎의 길이, 폭과 면적이 증가하여 엽 건중량과 총 건중량이 증가하였다. 특히 95% 차광처리구에서는 대조구에 비해 근원경과 뿌리길이는 감소하였으며 총 건중량도 감소하였으나, 초장이 약 40% 증가 하였으며 엽 생육과 함수량 또한 증가하였다. 엽면적비(specific leaf area; SLA)와 엽면적률(leaf area ratio; LAR)은 통계적 유의성을 보이며 대조구에 비해 매우 높게 나타나 잎의 두께가 얇고 수광면적이 큰 것으로 나타났다. 이와 같이 병풍쌈은 낮은 광조건에서도 원활한 탄소동화작용을 하고 있는 것으로 나타났다. 본 연구 결과 병풍쌈의 임간재배를 통한 적정 광요구는 차광처리 75~95%(상대광도 10~20%)로 조사되었으며, 산채류로써의 상품성을 고려할 때 임간지역에서 75% 이상 차광재배 함으로써 식감과 생산량을 높일 수 있을 것으로 기대된다. 이 연구결과는 병풍쌈의 임간재배 가능성을 위한 기초자료로 활용할 수 있을 것으로 판단된다.

Isolation and Expression Analysis of a GDSL-like Lipase Gene from Brassica napus L.

  • Ling, Hua;Zhao, Jingya;Zuo, Kaijing;Qiu, Chengxiang;Yao, Hongyan;Qin, Jie;Sun, Xiaofen;Tang, Kexuan
    • BMB Reports
    • /
    • 제39권3호
    • /
    • pp.297-303
    • /
    • 2006
  • As lipolytic enzymes, GDSL lipases play an important role in plant growth and development. In order to identify their functions and roles, the full-length cDNA of a GDSL lipase gene, designated BnLIP2, was isolated from Brassica napus L. BnLIP2 was 1,300 bp long, with 1,122 bp open reading frame (ORF) encoding 373 amino acid residues. Sequence analysis indicated that BnLIP2 belonged to GDSL family. Southern blot analysis indicated that BnLIP2 belonged to a small gene family in rapeseed genome. RT-PCR analysis revealed that BnLIP2 was a tissue-specific expressing gene during reproductive growth and strongly expressed during seed germination. BnLIP2 expression could not be detected until three days after germination, and it subsequently became stronger. The transcript of this gene was deficient in root of seedlings growing at different stages. When juvenile seedlings were treated by methyl jasmonate (MeJ), salicylic acid (SA) and naphthalene acetic acid (NAA), BnLIP2 expression could not be induced in root. Our study implicates that BnLIP2 probably plays an important role in rapeseed germination, morphogenesis, flowering, but independent of root growth and development.

무등산, 천봉산 및 조계산에서 털조장나무 개체군의 분포특성과 동태 (Distribution Characteristics and Dynamics of the Lindera sericea Population at Mt. Mudeung, Mt. Cheonbong and Mt. Chogye)

  • 임동옥;최대훈;윤홍균
    • 한국환경생태학회지
    • /
    • 제29권4호
    • /
    • pp.570-579
    • /
    • 2015
  • 녹나무과 생강나무속인 털조장나무는 한국 희귀식물 가운데 약관심종(LC), 식물구계학적 특정식물 IV등급 종이며 무등산국립공원 깃대종이다. 무등산, 천봉산 및 조계산 지역에서 털조장나무는 경사도는 $12^{\circ}{\sim}51^{\circ}$, 분포사면은 북서사면에서 북동사면까지, 해발고는 220~533m사이에 분포하였다. 털조장나무를 조사한 방형구에서 확인한 관속식물은 37과 54속 66종 5변종 1품종 총 72분류군이었다. 이중 식물구계학적 특정식물 IV등급종은 털조장나무, III등급 종에는 노각나무와 단풍나무가 있었으며, 한국 고유종은 노각나무와 지리대사초였다. 털조장나무가 분포하는 무등산지역의 식생군집은 신갈나무와 졸참나무-털조장나무, 때죽나무 군집, 천봉산지역은 노각나무-털조장나무, 조릿대군집, 조계산지역의 선암사지역은 서어나무-털조장나무, 조릿대군집 그리고 송광사 지역은 노각나무-털조장나무, 조릿대군집이었다. 조사된 털조장나무는 총 662개체였는데 이중 치수를 포함한 줄기가 1개인 개체는 353개(53.32%)였고, 2~5개의 맹아지를 갖는 개체는 270개(40.79%)였다. 맹아지 수가 가장 많은 개체는 27개로 확인되었다. 전체 662개체에서 맹아지 수는 1,198줄기였다. 또한 수고는 50cm에서 150cm까지의 개체가 699개(58.34%)로 가장 많았고 가장 큰 맹아지는 565cm였다. 맹아지의 근원 직경은 1cm미만이 992개(82.81%)로 가장 많았고 다음은 직경 1.0~1.5cm는 156개(13.2%)였다. 가장 큰 줄기는 근원 직경이 3.2cm이고 키는 565cm이었는데 근원부는 50%가, 흉고부는 25%가 고사된 상태였고, 줄기 한쪽이 세로로 찢어져 있었다. 4m이상인 3개체의 줄기도 정단부의 가지가 일부 고사된 상태였다. 따라서 한국산 털조장나무는 정아우세인 수형을 유지하지만 일정 수고 이상의 줄기는 고사되고 맹아지 수를 증가시킴으로서 개체의 형태적 적응을 보이는 관목이다.

Molecular Cloning and Characterization of a Novel Stem-specific Gene from Camptotheca acuminata

  • Pi, Yan;Liao, Zhihua;Chai, Yourong;Zeng, Hainian;Wang, Peng;Gong, Yifu;Pang, Yongzhen;Sun, Xiaofen;Tang, Kexuan
    • BMB Reports
    • /
    • 제39권1호
    • /
    • pp.68-75
    • /
    • 2006
  • In higher plants, P450s participate in the biosynthesis of many important secondary metabolites. Here we reported for the first time the isolation of a new cytochrome P450 cDNA that expressed in a stem-specific manner from Camptotheca acuminata (designated as CaSS), a native medicinal plant species in China, using RACE-PCR. The full-length cDNA of CaSS was 1735 bp long containing a 1530 bp open reading frame (ORF) encoding a polypeptide of 509 amino acids. Bioinformatic analysis revealed that CASS contained a heme-binding domain PFGXGRRXCX and showed homology to other plant cytochrome P450 monooxygenases and hydroxylases. Southern blotting analysis revealed that there was only one copy of the CaSS present in the genome of Camptotheca acuminata. Northern blotting analysis revealed that CaSS expressed, in a tissue-specific manner, highly in stem and lowly in root, leaf and flower. Our study suggests that CaSS is likely to be involved in the phenylpropanoid pathway.