• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.65-72
• /
• 2004

For the burrs formed in machining are irregular and very sharp in shape, it is usually very difficult to measure burr accurately. It was proved that micro burr geometry can be measured imprecision by the Conoprobe sensor using conoscopic holography method. We developed 3D burr measurement system using this sensor. The system is composed of Conoprobe sensor, XY table, controller and 3D measurement program. Some measurements using the developed system are conducted for the burrs formed in micro drilling and piercing. Specific software fur burr measurement includes several function, calculation of burr volume, average burr height. Burs formed on a curved surface were compensated and measured successfully using the basic surface compensation function.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.343-349
• /
• 1998

A modeling of machined geometry and cutting force was proposed for the case of round shape machining, and the effects of internally machined profile are analyzed and its realiability was verified by the experiments of roundness tester, especially in boring operation in lathe. Also, harmonic cutting force model was proposed with the parameter of specific cutting force, chip width and chip thickness, and in this study, we can see that bored workpiece profile was also mapped into cutting force signal with this model. In general, we can calculated the theoretical lobe profile with arbitrary multilobe. But in real experiments, the most frequently measured numbers are 3 and 5 lobe profile in experiments. With this results, we can predict that these results may be applied to round shape machining such as drilling, boring, ball screw and internal grinding operation with the same method.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.237-249
• /
• 1994

A new type of cut method, called SK-cut, was developed in order to overcome the shortcomings of the conventional V-cut and Burn-cut blasting methods. Total 190 times of test blasts were performed for the evaluation of the efficiency of new blasting method. V-cut, Burn cut and SK-cut were compared by applying them to the excavation of main gallery and construction tunnel of underground oil storage cavern. Test results showed that excavation efficiency of the new method was increased by 5.9~9.8% and that specific charge was reduced to 71~92%.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.517-524
• /
• 2014

Two key technologies of horizontal drilling and hydraulic fracturing are recognized to achieve the rapid growth of shale gas production, in specific, in the United States during last decade. The claims between environmentalists and oil companies have been debating in terms of water contamination. Nowadays, voluntary publication of chemicals from shale gas players are available in the website, FracFocus. This paper introduces chemicals that are currently used in hydraulic fracturing process. Among chemicals, guar gum and guar derivatives are dominantly consumed to increase the viscosity of hydrofracking fluids. The role of additional additives, such as breakers and biocides, is presented by explaining how they cut down the molecular structure of guar gum and guar derivatives. In addition, crosslinking agent, pH controller, friction reducer, and water soluble polymers are also presented.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.235.1-235.1
• /
• 2003

With an aim of obtaining high efficacy in cartilage regeneration, implantable polymeric rods were fabricated. These rod-type matrices were anticipated to perform structural tissue supporting activity and enhance extracellular matrix (ECM) formation by releasing specific agent, DHEA-S, in controlled manner. It is expected that application for the drilling operation on the articular cartilage of OA patients as the implants may promote regeneration of their cartilage. Osteoarthritis (OA) is a degenerative joint disease characterized by progressive loss of articular cartilage, subchondral bone remodeling, spur formation, and synovial inflammation. (omitted)

• 물과 미래
• /
• 제14권4호
• /
• pp.73-81
• /
• 1981

암반 지하수의 개발이 현재 국내에서 활발히 진행되고 있으나, 이들 심부 지하수를 배태하고 있는 각종 암류에 대한 그 수리 지질학적인 산출상태를 규명키 위한 연구가 전무한 상태였다. 대체적으로 심부 지하수는 지하 심부에서 발원 형성된 지질학적인 일 및 이차 공극내에 저유된 것으로 그 산출상태가 가장 양호한 암류는 화산암류, 퇴적암류, 변성퇴적암 및 편암, 안산암류, 편마암류 및 화강암의 순이다. 특히 규모가 큰 단층, 파쇄대와 같은 이차 공극이 잘 발달되어 있는 저지대에서의 암반, 지하수의 산출상태는 규모가 적은 절리, 층리와 같은 일 및 이차 공극이 발달된 고지대보다 그 산출상태가 각 암류별로 310% 이상 높다. 특히 결정질암에 대한 적정정호 심도를 구해 본 결과 그 심도는 80m이였다.

• 화약ㆍ발파
• /
• 제24권1호
• /
• pp.29-37
• /
• 2006

최근 국내 터널현장에서 기계식 장전장비를 활용한 벌크에멀전 (bulk emulsion) 폭약의 수요가 증가되면서 국내 암반 및 주변여건에 적합한 발파의 합리적인 설계기준이 요구되고 있다. 본 연구에서는 현재까지 국내에서 기계식 장전장비를 활용한 벌크에멀젼 폭약을 적용하여 시공한 사례 중 굴진효율 및 여굴량이 양호한 발파결과를 근거로 암반등급별 최적 비장약량과 영역별 적정 장약량을 검토하였다. 또한, 조건을 만족하는 발파결과를 분석하여 RMR 암반분류와 벌크에멀젼 폭약의 최적 비장약량과의 상관식 $({\Upsilon}= 0.669 + (0.0154{\times}RMR),\;r=0.81)$을 얻었고, 영역별로 천공장 변화에 따른 적정 장약량 범위를 산출하였다.

• 해양환경안전학회지
• /
• 제26권1호
• /
• pp.103-113
• /
• 2020

잭업 드릴링 리그 (Jack-up drilling rigs)는 해양자원개발 분야 중 석유 및 가스 탐사 산업에서 널리 사용되는 대표적인 해양구조물이다. 이러한 잭업 구조물은 대체로 얕은 수심에서 사용하도록 설계되었지만 에너지 산업의 추세로 대수심 및 가혹한 환경 조건에서도 사용이 가능한 설계가 요구되고 있다. 이러한 잭업구조물의 운영환경 확장에 따라서 과도한 설계를 최소화하고 신뢰성 반영된 설계법이 요구되었다. 기존의 해양구조물 산업에서 잭업 구조물의 설계법은 사용(혹은 허용)응력 설계 (WSD: Working (or Allowable) Stress Design) 방법을 사용하여 설계가 되고 있었다. 이러한 설치환경변화에 따라서 충분한 신뢰성을 확보가 가능한 하중 및 저항계수 (LRFD: Load and Resistance Factored Design) 방법을 최근 개발되었고 규정화가 되었다. LRFD 방법은 통계적 기반으로 한 한계상태설계 개념으로 잭업구조물의 구성구조부재의 하중과 전산수치해석을 이용한 강도의 불확성을 하중 및 저항 계수로 표현하는 설계법이다. 개발된 LRFD 방법은 실제 잭업구조물 설계의 적합성 판단을 위하여 기존의 WSD 방법과의 정량적인 비교 분석이 반드시 필요하다. 따라서 본 연구는 기존의 WSD와 LRFD 방법으로 이용하여 실 잭업 구조물의 레그 구조를 대상으로 상용유한요소해석코드를 이용하여 정량적인 UC (Unity Check)값을 기반으로 비교 분석하였다. 분석된 결과로 다양한 환경하중조건 하에서 LRFD 방법을 사용하여 잭업구조물의 레그(Leg) 설계에서 상당히 합리적인 UC 값을 가지고 기존 대표적인 WSD기법 중에 하나인 API-RP 코드 대비 약 31 % 차이가 분석되었다. 따라서 LRFD 설계 방법이 WSD 방법에 비해 구조 최적화 및 합리적인 설계에 더 유리하다는 것을 확인할 수 있었다.

• 대한관절경학회지
• /
• 제2권2호
• /
• pp.185-188
• /
• 1998

Spontaneous osteonecrosis of the knee was first described by Ahlbck et al in 1968 as the spontaneous and sudden onset of severe pain, usually on the medial side of the knee joint, in old age(>60 years) with no specific etiologic factors. They differentiate the disease from osteochondritis dissecans, osteoarthritis, fracture, infection, neuropathic joint and secondary osteonecrosis of the knee joint. So far many investigators described this disease but had never observed cases developed in young patient with familial occurrence. The report presented here is a case of spontaneous osteonecrosis of both medial and lateral femoral condyles involving the bilateral knee joint that were treated by arthorscopic loose body removal and multiple drilling.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.247-262
• /
• 2004

In the earlier application of the spline finite strip method(FSM), the uniform B3-spline functions were used in the longitudinal direction while the conventional interpolation functions were used in the transverse direction to construct the displacement filed in a strip. To overcome the shortcoming of the uniform B3-spline, non-periodic B-spline was developed as the displacement function. The use of non-periodic B3-spline function requires no tangential vectors at both ends to interpolate the geometry of shell and the Kronecker delta property is also satisfied at the end boundaries. Recently, non-periodic spline FSM which was modified to have a multiple knots at the boundary was developed for the shell analysis and applied to the analysis of bridges. In the formulation of a non-symmetric spline finite strip method, the concepts of non-periodic B3-spline and a stress-resultant finite strip with drilling degrees of freedom for a shell are used. The introduction of non-symmetrically spaced knots in the longitudinal direction allows the selective local refinement to improve the accuracy of solution at the connections or at the location of concentrated load. A number of numerical tests were performed to prove the accuracy and efficiency of the present study.