• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.50-55
• /
• 2009

The effect of active gluten supplementation on the quality properties of rice bagel was investigated. Water hydration capacity of rice flour increased as the amount of gluten increased, whereas alkaline water retention capacity decreased. Pelshenke value and sedimentation value were incerased as the amount of gluten increased, but these values are lower than those of strong wheat flour. Peak viscosity, setback, peak height, and peak width decreased as the amount of gluten increased. When the active gluten of 23% was added to the rice flour, the specific loaf volume of bagel increased more that two times compared with the active gluten of 11%. Hardness, gumminess, and chewiness were decreased as the amount of gluten increased. Specific loaf volume of bagel showed highly positive correlation in water hydration capacity, Pelshenke value, and sedimentation value of which values were r=0.962, r =0.964, and r =0.966, respectively.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.458-464
• /
• 2021

Tungsten disulfide (WS₂), a typical 2D layerd structure, has received much attention as a pseudocapacitive material because of its high theoretical specific capacity and excellent ion diffusion kinetics. However, WS₂ has critical limits such as poor long-term cycling stability owing to its large volume expansion during cycling and low electrical conductivity. Therefore, to increase the high-rate performance and cycling stability for pseudocapacitors, well-dispersed WS₂ nanoparticles embedded in carbon nanofibers (WS₂-CNFs), including mesopores and S-doping, are prepared by hydrothermal synthesis and sulfurizaiton. These unique nanocomposite electrodes exhibit a high specific capacity (159.6 F g^-1 at 10 mV s^-1), excellent high-rate performance (81.3 F g^-1 at 300 mV s^-1), and long-term cycling stability (55.9 % after 1,000 cycles at 100 mV s^-1). The increased specific capacity is attributed to well-dispersed WS₂ nanoparticles embedded in CNFs that the enlarge active area; the increased high-rate performance is contributed by reduced ion diffusion pathway due to mesoporous CNFs and improved electrical conductivity due to S-doped CNFs; the long-term cycling stability is attributed to the CNFs matrix including WS₂ nanoparticles, which effectively prevent large volume expansion.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.4
• /
• pp.497-504
• /
• 2024

This study investigated the effects of dietary supplementation with Sargassum horneri celluclast hydrolysate (SHCH) on the growth performance, feed utilization, non-specific immunity and antioxidant capacity of the Pacific white shrimp Penaeus vannamei. Six diets were prepared by SHCH supplemention levels of 0, 5, 10, 20, 40 and 80 g/kg (designated as Con, S5, S10, S20, S40 and S80, respectively). A total of 540 shrimp were randomly distributed in triplicate across 18 tanks and fed one of the diets for five weeks. Weight gain did not differ significantly among the groups except for S80. The feed conversion ratio was significantly lower in S10 than in S80. Phenoloxidase and nitro-blue tetrazolium activities were significantly higher in S5 than in Con. The prophenoloxidase gene was significantly upregulated in S10 compared to that in Con. The gene expression of crustin, glutathione peroxidase, lipopolysaccharide and β-1,3-glucan-binding protein were significantly upregulated in S5 compared to Con. The superoxide dismutase gene was significantly upregulated in S20 and S80 compared to Con. Supplementing shrimp diets with up to 8% of SHCH did not impair non-specific immunity or antioxidant capacity. However, based on growth results, supplementation up to 4% was considered appropriate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.83-93
• /
• 2016

This study purposed to examine the water retention capacity of floor litter in deciduous forests. Water holding capacity(WHC) and interception storage capacity of Alnus hirsuta Turcz. ex Rupr., Quercus acutissima, Quercus mongolica litters were experimentally estimated. Physical characteristics of litters were also obtained to understand the relationships between water-retention capacity and litter characteristics. Experiments showed that WHC increases with specific volume of litter, varying 244.4% to 416.8% of its dry mass. Interception storage have estimated with rainfall simulation experiments. Maximum interception storage ($C_{max}$) and minimum interception storage ($C_{min}$) of litters were 220% and 138% of dry mass in Alnus hirsuta Turcz. ex Rupr., 218% and 137% in Quercus acutissima, and 240% and 156% in Quercus mongolica. Both $C_{max}$ and $C_{min}$ increased linearly with litter mass, and the values of $C_{min}$ in broadleaf litters have also linear relation to leaf area.

• The Korean Journal of Ecology
• /
• v.26 no.5
• /
• pp.267-271
• /
• 2003

To elucidate effects of air pollutants on ecophysiological properties of two Quercus mongolica stands at different levels of air pollution, photosynthetic capacity and chloroplast pigment were measured in leaves of Q. mongolica. Photosynthetic capacity, photosynthetic pigment content and SLA (specific leaf area) of Q. mongolica leaves in polluted area were lower than those in nonpolluted area. Also, the chlorosis and mottling in some of leaves were observed in polluted area after August. Except for total carotenoid (P<0.05) the correlations between photosynthetic capacity and pigment content were not significant. Photosynthetic capacity of Q. mongolica leaves in polluted area was decreased after July.

• Geomechanics and Engineering
• /
• v.5 no.5
• /
• pp.447-462
• /
• 2013

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

• Journal of Power System Engineering
• /
• v.16 no.4
• /
• pp.60-65
• /
• 2012

This study was carried out to investigate the effect of reverse transformation on the damping capacity in high manganese austenitic stainless steel. ${\alpha}^{\prime}$-martensite was formed with the specific direction and surface relief by deformation. Over 95% of the austenite phase was transformed to deformation-induced ${\alpha}^{\prime}$-martensite by 70% cold rolling. Reverse transformation became rapid above an annealing temperature of $550^{\circ}C$, but there was no significant transformation above $700^{\circ}C$. In addition, with increasing annealing time at $700^{\circ}C$, reverse transformation was induced rapidly, but the transformation was almost completed at 10 min. Damping capacity was increased up to $700^{\circ}C$, and than unchanged with the increasing annealing temperature. Damping capacity increased steeply with an increasing reverse treatment time up to 10min, whereas there were no significant change with a treatment time of more than 10 min. Damping capacity increased with an increasing the reversed austenite and was strongly affected by reversed austenite.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.6
• /
• pp.295-301
• /
• 2014

In this study, the relationship between strength and damping capacity of annealed magnesium alloys after hot rolling was investigated. The microstructure of hot rolled magnesium consisted of dendrite structure and $Mg_{17}Al_{12}$ compounds precipitated along the grain boundary. The dendrite structure was dissipated, $Mg_{17}Al_{12}$ compounds was decomposed by annealing, and then its dissolved in ${\alpha}$-Mg. With an increasing the annealing temperature and time, strength was slowly decreased and damping capacity was slowly increased by the growth of grain size and decreasing of defects induced by hot rolling. In annealing treatmented magnesium alloys after hot rolling, damping capacity was decreased rapidly with an increase of strength. There was on proportional relationship between tensile strength, and damping capacity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1363-1373
• /
• 2022

The recent seismic events that occurred in South Korea have increased the interest in the re-evaluation of the seismic capacity of nuclear power plant (NPP) equipment, which is often conservatively estimated. To date, various approaches-including the Bayesian method proposed by the United States (US) Electric Power Research Institute -have been developed to quantify the seismic capacity of NPP equipment. Among these, the Bayesian approach has advantages in accounting for both prior knowledge and new information to update the probabilistic distribution of seismic capacity. However, data availability and region-specific issues exist in applying this Bayesian approach to Korean NPP equipment. Therefore, this paper proposes to construct an earthquake experience database by combining available earthquake records at Korean NPP sites and the general location of equipment within NPPs. Also, for the better representation of the seismic demand of Korean earthquake datasets, which have distinct seismic characteristics from those of the US at a high-frequency range, a broadband frequency range optimization is suggested. The proposed data construction and seismic demand optimization method for seismic capacity re-evaluation are demonstrated and tested on a 480 V motor control center of a South Korea NPP.