• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.40-46
• /
• 1986

Change of color of woods is a trouble frequently found in decorative wood products. In this paper, studies were carried out on discoloation sensitivities of wood specimens to iron (0.1%, $FeCl_3{\cdot}6H_2O$), alkali (pH12.0, NaOH), acid (pH 1.0 $C_2H_2O_4$) and exposing to sunlight (40 hrs.). Four soft-woods and eleven hard-woods grown in Korea were used in this test. The results obtained were as follows: 1. In iron stain, strong discolored wood species were Larix leptolepis, Quercus mongolica. Zelkova serrata and Prunus yedoensis, and light discolored were Paulownia lomentosa and Pinus rigida. 2. In alkali stain. light discolored wood species were Abies holophylla, Kalopanax pictum, Populus ${\times}$ albaglandulosa, Acer mono, Pinus rigida, Pinus densiflora, Quercus mongolica, Betula platyphylla var. japonica, Prunus yedoensis, Zelkova serrata, Populus euramericana, Pinus koraiensis and Paulownia tomentosa, but there was no wood species of strong discolored compared with the color difference values of other reports. 3. In acid stain, light discolored wood species were Pinus rigida, Paulownia tomentosa. Pinus koraiensis, Quercus mongolica, Kalopanax piclum and Acer mone, but there was no strong discolored species compared with the color difference values of other reports. 4. In exposing to sunlight, strong discolored species were Larix leptolepis, Acer mono, Paulownia tomentosa, Populus euramericana, Pinus densijlora, Robinia pseudoacacia, Abies holophylla, Populus ${\times}$ albaglandulosa, Zelkova serrata, Prunus yedoensis and Pinus rigida, and light discolored was Alnus japonica. In general, it was shown that Korean wood species were susceptible to change of color by exposing to sunlight and iron stain compared with by alkali stain and acid stain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.856-865
• /
• 2020

Objective: This study was conducted to evaluate the physicochemical properties and changes in moisture concentrations of bedding materials under the conditions of rearing Korean Hanwoo cows. Methods: Two experiments were conducted to investigate the physicochemical characteristics (Exp. I) and usefulness as beddings for rearing cattle (Exp. II) by the type of beddings such as sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and the species of pine trees from different countries of origins (China, Pinus armandii, AR; Vietnam, Pinus kesiya, KE; USA, Pinus rigida, RI). Results: In Exp. I, SD-AR showed the largest proportion (78.3%) of fine particles (250 ㎛+below 250 ㎛) and the highest bulk density (208 kg/㎥) among treatments (p<0.05). The water absorption capacity at 24 h of both S+W-RI (713%) and -KE (701%) was the highest among treatments (p<0.05) and higher than those of SD or WS alone within each species of pine tree (p<0.05). Moisture evaporation rates (%) at 12 h were ranged from 52.3 to 60.8 for SD, 69.9 to 74.4 for WS, and 72.3 to 73.5 for S+W. Total amounts (mg/㎡) of ammonia emissions were the lowest (p<0.05) in KE species among the pine species within each type of bedding material, having higher ability of ammonia absorption. In Exp II, KE species in both side A and B had lower moisture concentrations (%) than other species. Regardless of types of beddings except SD-AR, moisture concentrations of beddings within a pen were higher (p<0.01) at side A than B. Conclusion: The KE species has better physical characteristics than other beddings and more useful for rearing Hanwoo cattle than other beddings, probably caused by the differences in the method and degree of wood processing rather than the species.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.365-374
• /
• 2008

Understanding of the properties of woods is important in wood utilization. Until now, traditional wooden houses(Korean-style house, Buddhist temple, royal palaces) and furniture have been made of domestic woods with the experience of a craftsman rather than the scientific knowledge on woods. Because of concrete-based houses and imported wood products and furniture, even wood craftsmen decrease in number, too. This study was carried out to collect wood samples growing in Korea and to measure wood characteristics. Anatomical, physical and mechanical properties of 37 wood species were investigated.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.49-66
• /
• 1990

In order to identify an unknown wood sample native to Korea. the softwood databases(KSWCHUN; Korean SoftWood CHUN) and the hardwood databases(KHWCHUN; Korean HardWood CHUN) had been built. and the new computer searching programs(IDINEX; IDentification INformation EXpress) has been written in Turbo Pascal(V.5.0) and in Macro Assembly(V.5.0). The characters of the data were based on the 74 features of softwood and on the 148 features of hardwood which are a part of new "IAWA list of microscopic features for hardwood identification" published in 1989. For the purpose of this investigation the wood anatomical nature of 25 species of softwood(13 genera of 5 families) and of 112 species of hardwood(57 genera of 31 families) were observed under a scanning electron microscope and light microscope. and a lot of literature used. The IDINEX programs are based on edge-punched card keys. with several improvements. The maximum number of features in the IDINEX is 229. but that is fixed for a given database. Large numbers of taxa are handled efficiently and new taxa easily added. A search may be based on sequence numbers of features. Comparisons are made sequentially by feature and taxon using the entire suite of features specified to produce the list of possible matching taxa. The results are followings. (1) The databases of Korean wood and the searching programs(IDINEX) had been built. (2) The databases of Korean wood could be an information to search an unknown wood. (3) The databases would be valuable. for the new features, which were not mentioned in Korean wood up to the present. were observed in details. (4) The ultrastructures of the cell walls(warty layer) and crystals observed under a scanning electron microscope will be helpful to search an unknown wood in particular. (5) The searching process is more quick and accurate than the others. 6) We can obtain the information on the differences of a species from the other and search an unknown wood using probability. in IDINEX, (7) The IDINEX will be utilized to identify and classify an animal life, vegetable world, mineral kingdom, and so on.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.55-64
• /
• 2023

Properties of a lesser-used wood species were investigated to determine its potential for structural utilization. Trees of Delonix regia were felled and sampled at the base, middle and top and then sectioned to inner wood, middle wood, and outer wood for variation across the axial and radial directions. Hence, selected physical and mechanical properties as well as natural durability of D. regia along the radial and axial directions were examined. Obtained data were analyzed using analysis of variance (ANOVA) at α_0.05. There was no significant difference in the Moisture content (MC) of the wood but specific gravity (SG) decreased from base to top ranging from 0.35-0.44. Water absorption, volumetric swelling, and volumetric shrinkage range from 46.18-51.86%, 2.57-4.02%, and 2.26-3.96% respectively along the axial plane. The weight loss for graveyard exposure and accelerated laboratory decay test ranged from 25.14-48.00% and 32.02-44.45% respectively. Modulus of Rupture and Modulus of Elasticity values range from 29.42-72.68 Nmm² and 3,834.54-8,830.37 Nmm² respectively. The SG values has confirmed the species as a medium density wood and values of other properties tested showed that the wood is dimensional stable and moderately resistance to fungi and termite. Hence, it could be used for light construction purposes such as furniture and other interior woodwork.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.244-250
• /
• 2014

This study was conducted to identify wood species of 72 wooden parts (pillar, beam, jangyeo, purlin, judu, soro, bracket, deagong, ceiling panel, etc.) used for Daewungjeon Hall in the Woonsoosa Temple, Busan in Korea. Identified wood species were 67 Pinus spp. (Kesiya group), 4 Carpinus spp. and 1 Quercus spp. (Cerris group). In pillars, 14 red pines and 4 Carpinus and in purlins, 4 red pines and 1 Cerris were found. Other elements were red pines. Carpinus woods, which were used for the lower portions of three pillars (Dongbari), seemed repaired parts. A carved wood used for the stand of Buddhist statues was identified as Alnus spp. This study showed that Daewungjeon Hall of the Woonsoosa Temple was made mostly of red pines.

• Journal of architectural history
• /
• v.15 no.2
• /
• pp.23-38
• /
• 2006

During the repair and restoration of the Daewoongjeon Hall of Youngguksa Temple, species identification and tree-ring dating for both present wood elements and charred ones excavated under the Hall, were conducted. The species of 74 wood elements of Daewoongjeon Hall, were identified as Pinus densiflora Sieb. et Zucc. and only 1 was identified as exotic Pinus species. The latter wood, which was used in the laths, seems to have been replaced during past repairs. Many documentary records and various artifacts pertaining to Youngguksa Temple are being excavated, but none described precisely the construction date of the present Daewoongjeon Hall. Also, from beneath the Daewoongjeon Hall, cornerstone and foundation of previous building and several charred wood elements were excavated. In comparing the direction of the stone columns of foundation of the previous structure and the existing Daewoongjeon Hall, the previous structure was rotated in an angle of approximately $15^{\circ}$. Therefore, in order to find the association of the previous structure with the present Daewoongjeon Hall, tree-ring dating was conducted. The dating of 41 original timbers and 14 roof-filling timbers of the present construction elements revealed that the last annual ring was of A. D. 1703 with complete latewood, indicating that those woods was cut some time between the autumn of 1703 and spring of 1704, and the building was erected in 1704 when we assume no period of wood storage. The year of the last annual ring of the charred elements, which were excavated from beneath the Daewoongjeon Hall, was analyzed as 1674. The cutting year of the woods used for the present building began in 1698, therefore, it can be presumed that the Daewoongjeon Hall before the fire was a structure that was elected shortly after 1674 and that a catastrophic fire occurred some time between 1674 and 1698.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study is to examine the species of wooden members used in the Youngsanjeon Hall of the Sucknamsa temple in Anseong, Korea. Ninety-five wood samples from pillars, head-penetrating ties, beams, corner rafter, rafter, floor board and other wood members were identified. Seven species identified were hard pine, exotic pine, Zelkova serrata, Ginkgo biloba, Diospyros, Quercus(Cerrus) and Pyrus spp. In the case of pillars, eight were hard pines and the others Zelkova and Pyrus. Species of angle rafter were Ginkgo biloba and Zelkova. and those of beams were one hard pine and one Zelkova. Two purlin samples were Quercus(Cerrus) and rafters were hard pines except one Ginkgo and one exotic pine. Roof-filling timbers were identified as Zelkova and Diospyros spp. The other samples of roof-filling timbers were all identified as hard pines. The use of Ginkgo and several hardwoods in addition to hard pines may indicate supply of local logs near the Sucknamsa temple.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.122-127
• /
• 2016

The increasing interest in the environment and climate change around the globe, while the importance of building energy saving is increasing. The building energy simulation program is used for evaluating of energy performance of buildings. However, an input value of wood thermal conductivity in the programs is different from each other. Therefore, in this study, wood thermal conductivity was measured according to species. Through construction database by species of wood, the error of simulation program are able be decreased. In addition, if used as a structural and interior of buildings, the thermal conductivity and moisture of the wood is difficult to apply to the program because they were changed according to the occupant's lifestyle. In this paper, thermal conductivity and moisture content.of wood confirmed changes in the constant temperature and relative humidity ($25^{\circ}C$, 50% R.H.) condition.