• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.801-806
• /
• 2000

This study deals with the design of snow plow for the special equipment vehicle. The purpose of the study is to develop the snow plow that can install in the special equipment vehicle such as clean up vehicle or dump truck in winter season. To do so, it is designed by 3 sub-assembly - snow shovel, main frame, and hydraulic cylinder and its support. The snow shovel consists of 3 pieces to meet the road profile and to exchange easily the damaged parts. Main frame connects the snow shovel with the hydraulic cylinder and its support and supports the weight of snow. Finally, the hydraulic cylinder and its support move the snow shovel up and down and tilt it. We designed it using 3D commercial CAD software for concurrent engineering design.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.136-142
• /
• 2009

The vehicle's light-weight technology is divided into optimization of structure geometric and material. Structure geometric optimization and improvement of materials has examined to be power-train and maintenance on the severe condition. The core technology of Special vehicle's light-weight is constitute by Drop box, Axle and Final reduction gear. Technology and product of the parts is high to overseas and import dependency. We will want to examine the possibility of light-weight for the Axle Case and Drop box-connections. In this research, conventional design of excess weight will inhibit the mobility and fuel efficiency. Through the improvement of Axle material, we saw the possibility reducing weight. If you use the results of these studies, it will be available to domestic production technology and reducing weight of RV car, Dump truck, Track crain, etc.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.6-15
• /
• 2022

In this study, a traffic light recognition algorithm was implemented and validated for low-speed special purpose vehicles in an urban environment. Real-time image data using a camera and YOLO algorithm were applied. Two methods were presented to increase the accuracy of the traffic light recognition algorithm, and it was confirmed that the second method had the higher accuracy according to the traffic light type. In addition, it was confirmed that the optimal YOLO algorithm was YOLO v5m, which has over 98% mAP values and higher efficiency. In the future, it is thought that the traffic light recognition algorithm can be used as a dual system to secure the platform safety in the traffic information error of C-ITS.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.85-92
• /
• 1999

Vehicle rollover is an important issue for the traffic safety. Rollover can occur from the driver's action, the vehicle characteristics, or the road condition. This study is about the rollover propensity analysis of a jeep vehicle using the steering and braking maneuver, which is the combined result by the driver and the vehicle. Simple equations of roll motion is used to analyze the roll motion and a special purpose vehicle dynamics program is used to simulate the rollover of the jeep vehicle. From the simulation, an incipient rollover motion of the vehicle was found. However, the more complete rollover propensity analysis would require further investigation using roll dynamic sensitivity study.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.115-126
• /
• 2017

본 논문은 특수 차량용 동력 전달계 부품인 구동축의 가속 수명 시험을 수행하는 것이다. 동력 전달계 부품의 수명 평가를 위하여 사용환경의 주행 부하 스펙트럼의 데이터가 필요하나, 특수 차량의 경우 부하 스펙트럼을 구할 수 없는 경우가 대부분이다. 따라서, 본 논문에서는 차량 데이터와 특수 주행로 조건에 기반하여 주행 부하 로드 스펙트럼을 모델링하고 시뮬레이션 하였다. 가속 수명 시험에는 역승 모델을 적용하였고, 마이너 법칙을 사용하여 등가 토크를 구하였으며, 구동축 가속 수명 시험을 위하여 교정 가속법을 사용하였다. 피로시험은 세 수준의 스트레스로 수행하였으며, 사용자 스트레스 수준의 수명은 외삽법을 사용하여 예측 하였고, 실제 시험 결과와 부하 스펙트럼 데이터와의 비교로 수명을 검증하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제19권3호
• /
• pp.32-38
• /
• 2022

The in-wheel drive gearbox for military special vehicles converts the high-speed & low-torque output generated by the electric servomotor, into low-speed & high-torque mechanical power. As the vehicle is remotely maneuvered in mountainous terrain, wet fields, rough terrain, etc., the gearbox must generate a maximum input speed exceeding 5,000 rpm, a maximum torque of 245 Nm, and MTBF of 9,600 km. The purpose of this study was to analyze the failure mode of the gearbox, to ensure the durability of the in-wheel drive gearbox. Also, the field load test data of the vehicle was analyzed, the acceleration durability test standards were established, the acceleration durability test was conducted, and the durability test results were analyzed as well.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.240-249
• /
• 2013

This paper discusses the maneuvering control algorithm based on all-wheel independent driving and steering control techniques for special purpose 6WD/WS vehicles. The maneuvering control algorithms considering superior dynamic characteristics of high power in-wheel motors and independent steering system are designed to perform driving, steering, vehicle stability, and fault tolerant control. The maneuvering controller applies sliding and optimal control theories considering optimal torque distribution and friction circle related to the vertical tire force. The fault tolerant control algorithm is applied to obtain the similar maneuverability to that of the non-faulty vehicle. The simulations using the Matlab/Simulink dynamics model and experiments using HIL simulator mounting the real controllers with the designed control algorithms prove the improved performances in terms of vehicle stability and maneuverability.

• 인터넷정보학회논문지
• /
• 제6권3호
• /
• pp.147-158
• /
• 2005

나날이 심각해지는 교통문제에서 차량에 대한 정보를 이용하여 교통흐름을 개선해 줄 뿐만 아니라, 교통위반 차량을 효율적으로 적발할 수 있다. 차량 번호판은 차량정보를 인식하는데 중요하게 사용될 수 있다. 본 논문에서는 이동식 형태인 차량에 탑재한 카메라를 이용하여 촬영한 영상에서 차량의 번호판을 인식하는 새로운 기법을 제안한다. 여러 단계의 영상처리 과정과 인식 과정을 거쳐서 실시간에 처리할 수 있는 시스템으로 일반 차량뿐 아니라 특장차에 대한 인식도 가능하게 한다. 제안한 기법을 이용한 실제적 환경에서의 영상과 인식에 대한 결과가 실험결과에서 보여진다.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.135-141
• /
• 2008

Independent suspension axle and final reduction gear for special-purpose vehicles such as a armored vehicles are almost imported in Germany etc. so, developing them is necessary to save cost. In severe condition (open fields, water surface driving, obstacle pass), special-purpose vehicles must work well. Drop box, axle and final reduction gear performed static analysis. We know that is possible weight reduction. The purpose of this paper is to find out the optimal shape of final reduction gear's case by means of response surface methodology. The response surface method is the statistical method which can be applied to the non-sensitivity based optimization. The response surface which is constructed by the least square method contains only the polynomial terms so that the global maximum and minimum points are easily obtained.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.221-226
• /
• 2018

특수목적 차량은 일반적으로 사용자의 요구에 따라 주문 제작된다. 이러한 차량들이 고장을 일으키는 경우에는 수리비용 및 시간이 많이 든다. 이러한 문제점들을 해결하고자 차량의 이상여부를 원격으로 점검하고 고장부위를 원격에서 파악하여 수리비용 및 수리 기간을 단축하고자 한다. 본 연구에서는 전기제어부의 고장부위를 자동으로 판별하고 이를 사용자의 휴대폰앱을 통하여 바로 파악하여 즉각적인 고장코드를 특장차 제조사측에 통보하여 고장수리를 빠르고 원활하게 하고자 한다. 이를 구현하기 위하여 IoT 사물인터넷의 기술을 이용하여 특수목적의 차량 분야의 현장에서 요구되는 항목에 따라 고장부위를 스스로 판단하고 기기 자체적으로 제작사측에 고장여부를 알려주는 시스템을 구축하고자 한다.