• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.77-86
• /
• 2013

Cognitive radio (CR) has emerged as one of effective methods to enhance the utilization of existing radio spectrum. Main principle of CR is that secondary users (SUs) are allowed to use the spectrum unused by primary users (PUs) without interfering PU's transmissions. In this paper, PUs operate on a slot-by-slot basis and SUs try to exploit the slots unused by PUs. We propose OSA protocols in the single channel and we propose an opportunistic spectrum access (OSA) protocols in the multi-channel cognitive radio networks with one control channel and several licensed channels where a slot is divided into contention phase and transmission phase. A slot is divided into reporting phase, contention phase and transmission phase. The reporting phase plays a role of finding idle channels unused by PUs and the contention phase plays a role of selecting a SU who will send packets in the data transmission phase. One SU is selected by carrier sense multiple access / collision avoidance (CSMA/CA) with request to send / clear to send (RTS/CTS) mechanism on control channel and the SU is allowed to occupy all remaining part of all idle channels during the current slot. For mathematical analysis, first we deal with the single-channel case and we model the proposed OSA media access control (MAC) protocol by three-dimensional discrete time Markov chain (DTMC) whose one-step transition probability matrix has a special structure so as to apply the censored Markov chain method to obtain the steady state distribution.We obtain the throughput and the distribution of access delay. Next we deal with the multi-channel case and obtain the throughput and the distribution of access delay by using results of single-channel case. In numerical results, our mathematical analysis is verified by simulations and we give numerical results on throughput and access delay of the proposed MAC protocol. Finally, we find the maximum allowable number of SUs satisfying the requirements on throughput and access delay.

• Journal of Korean Society of Archives and Records Management
• /
• v.13 no.1
• /
• pp.181-187
• /
• 2013

This paper introduces the elaboration of official documents, archival organizations, and the tradition of records in Mongolia from 1694 to 1921. Modern records management began in 1912. Back then, Mongolians had special rules to send and receive official documents, and to register the sent and received official documents. Official documents were used to deliver decrees and policies of the Khan and were used to deal with internal affairs. After their independence in 1911, the traditional documents were collected and preserved. Records managers and archivists were trained by decrees in Mongolia.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.687-701
• /
• 2020

In the production of industrial fabric, it needs automatic real-time system to detect defects on the fabric for assuring the defect-free products flow to the market. At present, many visual-based methods are designed for detecting the fabric defects, but they usually lead to high false alarm. Base on this reason, we propose a Sobel operator combined with patch statistics (SOPS) algorithm for defects detection. First, we describe the defect detection model. mean filter is applied to preprocess the acquired image. Then, Sobel operator (SO) is applied to deal with the defect image, and we can get a coarse binary image. Finally, the binary image can be divided into many patches. For a given patch, a threshold is used to decide whether the patch is defect-free or not. Finally, a new image will be reconstructed, and we did a loop for the reconstructed image to suppress defects noise. Experiments show that the proposed SOPS algorithm is effective.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.429-444
• /
• 2004

The ambient vibration measurement is a kind of output data-only dynamic testing where the traffics and winds are used as agents responsible for natural or environmental excitation. Therefore an experimental modal analysis procedure for ambient vibration testing will need to base itself on output-only data. The modal analysis involving output-only measurements presents a challenge that requires the use of special modal identification technique, which can deal with very small magnitude of ambient vibration contaminated by noise. Two complementary modal analysis methods are implemented. They are rather simple peak picking (PP) method in frequency domain and more advanced stochastic subspace identification (SSI) method in time domain. This paper presents the application of ambient vibration testing and experimental modal analysis on large civil engineering structures. A 15 storey reinforced concrete shear core building and a concrete filled steel tubular arch bridge have been chosen as two case studies. The results have shown that both techniques can identify the frequencies effectively. The stochastic subspace identification technique can detect frequencies that may possibly be missed by the peak picking method and gives a more reasonable mode shapes in most cases.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.57-70
• /
• 2002

Back pain is painful for people at a lower lumber(L4/L5 or L5/S1). It is experienced as a most frequent disaster 70％ of workers have suffered from back-pain. Especially, the occurrence rate of back pain for nurses is very high. Therefore, this study investigates female nurses who worked as a part of a medical cost management team, which mainly deal with the medical insurance in a general hospital at Seoul area. These nurses had different job tasks, which used computers for 50％ of their time, so it can be treated as VDT workers. As a first step of this project, a muscle fatigue was measured for these special VDT workers. First, survey for nurses was conducted to figure out what is a real problem of them. Second, to evaluate an experimental data, a medical cost management team was chosen for subjects. Areas of measurement were 3 places that were the trapezius (TR), the medial deltoid (MD), and the erector spine muscle (ES: L4/L5). These areas are most frequently used, so they were chosen for this study. Measurements were taken before work and after work. From these measurements, it was revealed that a fatigue really comes from their main VDT task excluding natural fatigue after work, so their work environment need to be corrected.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1780-1787
• /
• 2014

Arterial oxygen saturation ($SpO_2$) monitoring for newborns requires special attention in neonatal intensive care units (NICUs). Newborns have very low photo-plethysmogram (PPG) amplitudes and their body movements are difficult to contain. Hardware design and its associated signal processing algorithms should be robust enough so that faulty measurements can be avoided. In this study, improved designs were implemented to deal with low perfusion, motion artifact, and the influence of ambient light. Dynamic range was increased by using different LED intensities and a feedback system. To minimize the effects of motion artifact and to discard other unqualified data, four additional algorithms were used, which were based on dual-trace detection, continuity of DC level, morphology of PPG, and simultaneity check of $SpO_2$. Our $SpO_2$ system was tested with newborns with normal respiration in the NICU. Our system provided fast, real-time responses and 100% artifact detection was accomplished under 84% of $SpO_2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.969-978
• /
• 2006

Recently, there has been explosive growth in Internet service contents, and we have witnessed the emergence of many real-time applications on the Internet. These types of applications require special support from the underlying network such as reliability, timeless, and guaranteed delivery, as well as different levels of service quality. Estimation network status and transcoding data rate are researching for QoS of multimedia service by using the RTP/RTCP. We propose two schemes that the way to calculate the one-way delay by expanding the structure of RTP/RTCP in Internet that provides us 'best effort' service and to estimate the network condition by using this in this paper. And we propose the dynamic RTCP mechanism based on one-way delay to deal with rapidly changed network situation immediately. In simulation, proposed monitoring schemes using the one-way delay has similar in performance to monitoring schemes using the GPS, proposed dynamic RTCP scheme obtain the desired result of decreased packet loss rate by sending RTCP RR packet lower than other schemes.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 1997.06a
• /
• pp.1-21
• /
• 1997

Silk is praised "Queen of Fiber", which wrote a glorious page in the history of human adornment culture. Thanks to the development of science and technology, silk production has been increased dramatically during last half century. Nowadays, as "Healthy Fiber" silk lets all the globe to be forming the "Silk Boom" Like in other scientific fields, a great deal of progress has been made in sericultural science and technology, which also accelerated the development of multipurpose utilization of sercultural recourses. The main tendency of the sericulture development is raising the quality of cocoon, and at the same time, increasing the output per unit mulberry area and labor production efficiency. The chief measure of raising the cocoon quality is breeding and selecting the new mulberry and silkworm varieties, preventing and curing the diseases and pests and improving the environment of mounting, and the symble for increasing the labor productivity is carrying out the technological system of saving labor and operation ease, and enlarging the production scale. As a natural protein fiber, silk will be still a favorite with human in the next century, because its structure and properties can not be replaced by other any fiber. The 21st century is the biological time, and measures of developing sericulture will use the achievement on the field of molecular biology and biotechnology to carry out the molecular breeding, development regulating, silkworm rearing industrializing, exploiting the new silk and its new usage, utilizing the sericultural resources, and producing the special protein from silkworm as a host of expressing exogenous genes so that make the sericulture to contribute more what it can do for the human being.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.1
• /
• pp.97-102
• /
• 2019

Disaster accidents at industrial sites have been increasing every year. In shipyards there are countless enclosed spaces causing issues like harmful-toxic gases stuck in those sealed areas. And due to such special and complicated structures of the working places with many layers of walls separating each other, there exist more issues of communication with workers trapped inside when accidents happen. Under this circumstance there must be a huge difficulty to evacuate or rescue the workers in case of any disaster. Therefore, in this paper, We would like to introduce the "integrated safety system" to more effectively deal with the problems and prevent such disasters in tough working environments. The suggested integrated safety system can prevent accidents in advance because it can control the data on the location of the workers in real time and the numerical values such as gas, oxygen, and carbon dioxide generated in the workplace in real time.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.3
• /
• pp.406-430
• /
• 2007

Most pharmaceutical licensing deals are made in the early stage of drug development. While this development process is not unique for complicated technology, a special feature of drug development is that it is highly regulated and a well-defined process. Its statistics in terms of costs and chances of technical success have been researched extensively. This enables relatively detailed calculations as benchmarks for actual deals to be made. Based on such calculations and on the analysis of licensing terms in published agreements, various companies offer quite expensive information, databases, software programs and consultation services to help establish what might be reasonable economic terms in a licensing deal. Over the years, pharmaceutical royalties have been the subject of various articles in journals. Most specific on this subject was the article on determining pharmaceutical royalties. Many other articles are about a more general nature deal with determining reasonable royalty rates, evaluating and underpinning the empirical value and usefulness of the 25% rule. The object of this article is to provide a relatively simple analytical approach based on the major economic terms underlying pharmaceutical licensing deals. The aim is to enhance the understanding of the relations between the major factors involved. Details are disregarded, as generally, where the terms of licensing deals depend on predictions over a considerable length of time, the value of detail is limited. Some specific issues addressed by the approach are the impact on profits of large investments, high risks and long development times characteristic of drug development, the consequent strong impact that the ultimate sales levels and operating margins may have on what might be considered a reasonable royalty rate, and the relationship between upfront payments and milestone payments to be paid during pharmaceutical development and the royalties due once the drug enters the market.