• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.61
• /
• pp.93-111
• /
• 2014

In this article, I have reviewed the validity of the Retla Clauses in bills of lading. In Tokio Marine(1970), US courts have permitted carriers to include Retla Clauses in their bills of lading that essentially disclaim all responsibility for the required statement. Simon J in The Saga Explorer(2012) disagreed with the decision of no representation in Tokio Marine and held that the statement with the Retla Clauses made on the bills of lading as to the cargo's apparent condition was a fraudulent misrepresentation. Simon J also requested a strong carriers' honest conduct. However, because the shippers always request the clean bill of lading for trade purpose and never call for a substitute bill of lading showing the true condition of goods, carriers will inevitably continue to clause bills of lading if they have no other better way of protecting themselves in the situation of Tokio Marine or The Saga Explorer. For the present, the decision of misrepresentation in The Saga Explorer might be helpless to change the position of the assignees of the bills of lading. And it seems that the debate on the validity of the Retla Clauses in bills of lading will be continued for the time being. In these circumstances, if the buyers hope to void the potential dispute, they may have a special agreement in the sale of goods contract, for example, requiring a pre-shipment inspection of the goods so as to know the actual condition of the goods on shipment.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.550-553
• /
• 2004

Recently, the demand for the Floating, Production, Storage, and Offloading facility (FPSO) which has some economic and technical advantages, has increased in offshore oil production areas. The 36,8000 DWT class FPSO was built in Hyundai Heavy Industries and will be installed in Offshore Angola. She dose not have self-propulsion system, but has additional facilities for oil production and positioning system. Main noise sources are contributing to the cabin noise of the accommodation are classified into three classes such as the machinery in the engine room and the deckhouse, HVAC system, and the topside equipments. In general, the noise regulation for the offshore structure is severer than that of the cargo ship and acceptable noise limit of cabin is specified as 45 dB(A). This paper describes the procedure of noise analysis, the countermeasures of noise control, and the measurement results of the quay trial. In order to minimize the noise levels, careful attention have to be paid by the special committee of experts from the initial design stage to the delivery. Proper countermeasures, considering the characteristics of sources and receiver spaces, were applied from the noise prediction and various experiment results. Finally, this ship was successfully delivered with excellent noise properties. The technology to minimize the noise levels for FPSO has been established throughout the construction of this ship.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.249-255
• /
• 2008

IOn 7th of Dec. 2007, large oil spill took place the seas off the Taean coast caused by the collision between VLCC Hebei Spirit and crane floating barge Samsung-1 and a lot of problems were revealed during response to the accident. The author, accordingly, examined to analyze the cause of this accident on the aspect of spill prevention and presented some preventive measures, such as strictness to the current standard for tug operation, expansion of VTS service area and transfer of the VTS responsibility to Korea Coast Guard, designation of appropriate anchorage per ship's type, cargo and visiting purpose, and special management for dangerous goods carriers.

• Journal of Radiation Protection and Research
• /
• v.45 no.3
• /
• pp.117-129
• /
• 2020

Background: Radiation portal monitors (RPMs) involving plastic scintillators installed at the border inspection sites can detect illicit trafficking of radioactive sources in cargo containers within seconds. However, RPMs may generate false alarms because of the naturally occurring radioactive materials. To manage these false alarms, we previously suggested an energy-weighted algorithm that emphasizes the Compton-edge area as an outstanding peak. This study intends to evaluate the identification of radioactive sources using an improved energy-weighted algorithm. Materials and Methods: The algorithm was modified by increasing the energy weighting factor, and different peak combinations of the energy-weighted spectra were tested for source identification. A commercialized RPM system was used to measure the energy-weighted spectra. The RPM comprised two large plastic scintillators with dimensions of 174 × 29 × 7 ㎤ facing each other at a distance of 4.6 m. In addition, the in-house-fabricated signal processing boards were connected to collect the signal converted into a spectrum. Further, the spectra from eight radioactive sources, including special nuclear materials (SNMs), which were set in motion using a linear motion system (LMS) and a cargo truck, were estimated to identify the source identification rate. Results and Discussion: Each energy-weighted spectrum exhibited a specific peak location, although high statistical fluctuation errors could be observed in the spectrum with the increasing source speed. In particular, ¹³⁷Cs and ⁶⁰Co in motion were identified completely (100%) at speeds of 5 and 10 km/hr. Further, SNMs, which trigger the RPM alarm, were identified approximately 80% of the time at both the aforementioned speeds. Conclusion: Using the modified energy-weighted algorithm, several characteristics of the energy weighted spectra could be observed when the used sources were in motion and when the geometric efficiency was low. In particular, the discrimination between ⁶⁰Co and ⁴⁰K, which triggers false alarms at the primary inspection sites, can be improved using the proposed algorithm.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.207-213
• /
• 2022

LNG CCS which is a special type of cargo hold operated at -163℃ for transporting liquefied LNG is composed of a primary barrier, plywood, insulation panel, secondary barrier, and mastic. Currently, glass fiber is used to reinforce polyurethane foam. In this paper, we evaluated the possibility of replacing glass fiber-reinforced polyurethane foam with basalt fiber-reinforced polyurethane foam. We conducted a thermal conductivity test to confirm thermal performance at room temperature. To evaluate the mechanical properties between basalt and glass-fiber-reinforced polyurethane foam which is fiber content of 5 wt% and 10 wt%, tensile and an impact test was performed repeatedly. All of the tests were performed at room temperature and cryogenic temperature(-163℃) in consideration of the temperature gradient in the LNG CCS. As a result of the thermal conductivity test, the insulating performance of glass fiber reinforced polyurethane foam and basalt fiber reinforced polyurethane foam presented similar results. The tensile test results represent that the strength of basalt fiber-reinforced polyurethane foam is superior to glass fiber at room temperature, and there is a clear difference. However, the strength is similar to each other at cryogenic temperatures. In the impact test, the strength of PUR-B5 is the highest, but in common, the strength decreases as the weight ratio of the two fibers increases. In conclusion, basalt fiber-reinforced polyurethane foam has sufficient potential to replace glass fiber-reinforced polyurethane foam.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.711-718
• /
• 2017

This study identified application range of SPS Code(Special Purpose Ship Code) applied to fishery training ship in Korea, and proposed counterplan for port state control. The latest contents of relevant convention was verified, used APCIS of Tokyo MOU and EQASIS provided by EU to analyze the current condition and deficiencies of port state control of fishery training ship. As the result, the SPS code equal to passenger ship and cargo ship of SOLAS convention should be satisfied with fishery training ship, and must follow ISPS Code. As for the result of record of port state control, it was confirmed that 8 fishery training ships were inspected 76 times and pointed out with 411 deficiencies in Tokyo MOU nation. 75% of deficiencies were related to SOLAS convention, and 71 times of inspections were conducted in Japan. Because it is not free from the fishery training ship, there is a need for active corresponding and preparation by enhancing local cooperative system and sharing the Internet inspection background, and need to develop and implement in-depth internship program to improve port state control counter plan for the trainees.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.7
• /
• pp.1051-1060
• /
• 2008

Now days, various types of ships are operated to transport both cargo and passengers all around the world. Most of the important auxiliary machinery installed in those ships is fluid machinery such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified as turbo and positive displacement pumps. This paper analyzes only turbo pumps out of the two types. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on the ship's type, my paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, rpm of pumps, pump kW/ME MCR and pump kW/GE kW under the conditions of seagoing and berthing according to the ship's type. In conclusion, (1) For the exact comparison, information on the head, kW, flow rate, number of pumps by ship's type, the pump installation status of the Merchant Ships and Training Ships were tabulated and compared in this paper. (2) In order to qualify one ship as the delegate ship, several methods were used. The result of the examination indicates that the chosen ships could be justified as a suitable representation of ships of their own type. (3) The correlation of several values(total pump kW, port pump kW, GE kW, seagoing pump kW, pump weight, ME weight, ME MCR, number of pumps and ME kW) could be obtained.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.23-30
• /
• 2019

Automobiles are largely divided into passenger cars with less than five passengers and commercial vehicles such as construction machines, trucks, mixers, special lorries, and large buses. Automobile maintenance companies are also divided into passenger cars and commercial vehicles. Because commercial vehicles are the livelihood vehicles of individual carriers engaged in cargo transportation, passenger transportation, and construction, fast and accurate maintenance is important. Access to the expressway is also important because the car is large and uses highways. In addition, the time required for troubleshooting is long, so sufficient space must be secured for parking the vehicle, and ease of entry and exit of the vehicle in the maintenance shop should be fully considered. For this reason, commercial vehicle maintenance companies have higher initial investment costs than car maintenance companies, and it is difficult to supply and maintain maintenance personnel. Therefore, it is necessary to carefully examine and analyze various related factors for successful commercial vehicle maintenance company selection. However, most existing commercial vehicle maintenance companies often choose their location based on the empirical judgment of the founder, the customs and the case, without a clear analysis. In this study, we show how to derive the location selection factors to be considered when establishing professional maintenance company for commercial vehicles and to select the optimal location by using AHP (Analytic Hierarchy Process) method.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.65-97
• /
• 2014

Arbitration is the dispute methods for speedy and economic resolutions in international commercial areas. In maritime disputes cases in East Asia, Korea and Japan are the regional benefits to cover and deal with the maritime cases on arbitration. And Korea and Japan are the competitive maritime industry for heavy shipbuilding industry, cargo carrier, processing and transhipment service on ports, and ship financial services in national competitive areas. Japan is the Tokyo maritime arbitration commission(TOMAC) as an uniquely capable of dealing with arbitrations involving problems arising in the sea field. TOMAC provides amended its arbitration rules 2014 aiming at matching with the maritime disputes circumstances with three maritime arbitration rules as ordinary rules, simplified rules and the rules of small claims arbitration procedure. KCAB however, as the unique commercial arbitration board in Korea is dealing on all of the commercial disputes on only the international commercial arbitration rules in 2011. Though KCAB is dealt with maritime dispute cases on international arbitration rules in Korea, it is small and simple compared with TOMAC in Japan. Maritime disputes are highly complicated and embroiled with multi-parties contract and subcontracts arising under contracts relating to bills of lading, charter parties, sale and purchase of ships, shipbuilding, ship financing and so forth. This paper is to provides a discussion and comparison on recently arbitration rules focus on the maritime aspects on Korea and Japan. We need to consider to make an independent and special institute and maritime arbitration rules including the multiparty consolidation and med-arb provisions for handling the disputes and resolution of maritime conflict cases in Korea.