• The Journal of Sustainable Design and Educational Environment Research
• /
• v.7 no.1
• /
• pp.15-28
• /
• 2008

A classroom is very crucial space for teaching and learning in school facility. In planning of these spaces, it is analyzed by investigating the present status and surveying the phenomena that students who are users psychologically feel about a classroom, the degree of a classroom's complying with the administration of the 7th curriculum, the contents of curriculum to sincerely approach the primary purpose of education and the results as below were obtained by integrating established cases of study. 1) The classroom of a course that is for exclusive use for administration of curriculum by the level and a class-based classroom is necessary for the administration of the 7th curriculum in the type of a classroom. 2) The scope of learning group for a class by the level is as below as a result of consideration of psychologically stable range of teachers and students who are faithful to curriculum. 3) The scale of classroom that is efficient in administration of curriculum and is psychologically stable is as below. As the result of this study, the capacity of a classroom in high school from now should be designed below 25 students for teachers to be faithful to the administration of curriculum and the classroom should be recognized as being not only for learning but also the space that students live in and in the space plan of a classroom from now, the psychological and mental satisfaction of teachers and students as well as physical satisfaction such as the scale of facility and the array of desks should be considered and the study in support of this is judged to be continued.

• Advanced Composite Materials
• /
• v.17 no.2
• /
• pp.125-137
• /
• 2008

FBG (Fiber Bragg Grating) sensors and optical fibers were embedded into CFRP dry preforms before resin impregnation in VaRTM (Vacuum-assisted Resin Transfer Molding). The embedding location was the interface between the skin and the stringer in a CFRP-stiffened panel. The reflection spectra of the FBG sensors monitored the strain and temperature changes during all the molding processes. The internal residual strains of the CFRP panel could be evaluated during both the curing time and the post-curing time. The temperature changes indicated the differences between the dry preform and the outside of the vacuum bagging. After the molding, four-point bending was applied to the panel for the verification of its structural integrity and the sensor capabilities. The optical fibers were then used for the newly-developed PPP-BOTDA (Pulse-PrePump Brillouin Optical Time Domain Analysis) system. The long-range distributed strain and temperature can be measured by this system, whose spatial resolution is 100 mm. The strain changes from the FBGs and the PPP-BOTDA agreed well with those from the conventional strain gages and FE analysis in the CFRP panel. Therefore, the fiber-optic sensors and its system were very effective for the evaluation of the VaRTM composite structures.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1184-1193
• /
• 2015

Monitoring for megalocytivirus infection was conducted for ten months from March to December in 2013 in 15 aquatic farms culturing, red sea bream, rock bream, rock fish and black sea bream around Tongyoung coastal area in Korea, to assess spatial and temporal variability of detection prevalence, and to explore possible links with seawater temperature. In nested-PCR targeted major capsid protein (MCP) gene, asymptomatic megalocytivirus infection was detected in the externally healthy farmed fish with a significant prevalence in range from 0 to 58.3% for ten months. Higher prevalence of megalocytivirus (46.7% - 57.1%) was observed in high water temperature season from September to November than that in other months with lower prevalence of 0.0% to 20.0%. Even though an acute infection of megalocytivirus was occurred in rock bream (positive in the first PCR) with high mortality in one of fifteen farms, there was no expansion or transmission of the disease to the rock fish and red sea bream culturing in net cage just proximal to the rock bream cage in which disease outbreaked. Nucleotide sequence analysis of the cloned MCP gene isolated asymptomatically infected rock fish revealed that the megalocytivirus in this study was clustered together with the rock bream iridovirus (RBIV) under the subgroup II of the genus megalocytivirus (Iridoviridae), which is known to be the major megalocytivirus strain in Korea. The typical histopathological signs were not found in the spleen of rock fish asymptomatically infected by megalocytivirus. Experimental infection of rock bream with the spleen homogenate of the rock fish infected asymptomatically did not induce any mortality unlike the homogenate of infected rock bream with hih mortlity. However, these results may suggest that the asymptomatic infection of megalocytivirus in other fish species can be a potential risk threatening aquaculture industries as a transmission factor of megalocytivirus to susceptible fish species, especially rock bream.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.96-104
• /
• 2020

A catadioptric omnidirectional zoom optical system using a hybrid lens (COZOSH) that performs simultaneously two functions of a lens and a mirror was designed at the visible wavelength range for daytime unmanned surveillance, and its performance was analyzed. The hybrid lens has lots of advantages in terms of fabrication and assembly of a COZOSH, because of the obviation of a lens boring process and reduction of the number of optical components. Additionally, we designed the COZOSH to expand the compressed inner-image region of a donut image at low spatial frequencies. As a result, the optimized design performance of the optical system that satisfies all initial design specifications was obtained from calculation of the modulation transfer function, spot diagram, and tolerance analysis. We confirmed that the COZOSH is a passively athermalized optical system under conditions of temperature variation from -30℃ to 50℃, by using athermalization analysis during zooming.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.262-270
• /
• 2004

Basic experiments were carried out using the THT-IV low-power Hall thruster to examine the influences of magnetic field shape and strength, and acceleration channel length on thruster performance and to establish guidelines for design of high-performance Hall thrusters. Thrusts were measured with varying magnetic field and channel structure. Exhaust plasma diagnostic measurement was also made to evaluate plume divergent angles and voltage utilization efficiencies. Ion current spatial profiles were measured with a Faraday cup, and ion energy distribution functions were estimated from data with a retarding potential analyzer. The thruster was stably operated with a highest performance under an optimum acceleration channel length of 20 mm and an optimum magnetic field with a maximum strength of about 150 Gauss near the channel exit and with some shape considering ion acceleration directions. Accordingly, an optimum magnetic field and channel structure is considered to exist under an operational condition, related to inner physical phenomena of plasma production, ion acceleration and exhaust plasma feature. A new Hall thruster was designed with basic research data of the THT-IV thruster. With the thruster with many considerations, long stable operations were achieved. In all experiments at 200-400 V with 1.5-3 mg/s, the thrust and the specific impulse ranged from 15 to 70 mN and from 1100 to 2300 see, respectively, in a low electric power range of 300~1300 W. The thrust efficiency reached 55 %. Hence, a large map of the thruster performance was successfully made. The thermal characteristics were also examined with data of both measured and calculated temperatures in the thruster body. Thermally safe conditions were achieved with all input powers.

• Wind and Structures
• /
• v.15 no.1
• /
• pp.27-41
• /
• 2012

Wind loads on low-rise buildings in general and residential homes in particular can differ significantly depending upon the laboratory in which they were measured. The differences are due in large part to inadequate simulations of the low-frequency content of atmospheric velocity fluctuations in the laboratory and to the small scale of the models used for the measurements. The imperfect spatial coherence of the low frequency velocity fluctuations results in reductions of the overall wind effects with respect to the case of perfectly coherent flows. For large buildings those reductions are significant. However, for buildings with sufficiently small dimensions (e.g., residential homes) the reductions are relatively small. A technique is proposed for simulating the effect of low-frequency flow fluctuations on such buildings more effectively from the point of view of testing accuracy and repeatability than is currently the case. Experimental results are presented that validate the proposed technique. The technique eliminates a major cause of discrepancies among measurements conducted in different laboratories. In addition, the technique allows the use of considerably larger model scales than are possible in conventional testing. This makes it possible to model architectural details, and improves Reynolds number similarity. The technique is applicable to wind tunnels and large scale open jet facilities, and can help to standardize flow simulations for testing residential homes as well as significantly improving testing accuracy and repeatability. The work reported in this paper is a first step in developing the proposed technique. Additional tests are planned to further refine the technique and test the range of its applicability.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.149-158
• /
• 2006

We have analyzed various tolerances of the multi-configurative microscopic system for inspecting the wire-bonding of a reed frame by using the Gaussian bracket method and the equivalent lens method. The tolerances for the curvature and the thickness, which are axial symmetric tolerances, are given by varying the back focal length within a fecal depth under diffraction-limited conditions. Moreover, by using the trial and error method, the axial non-symmetric tolerances for decenter and tilt are established by assigning the 5% variation of MTF(modulation transfer function) at the spatial frequency of 50 lp/mm and at the field angle of 0.7 field. As the tolerances with the most probable distribution are distributed within the range of the decay rate of less than 5% independent of the probability distribution of tolerances, we can achieve completely the desired design performances of the multi-configurative microscopic system by using the various ranges of these tolerances.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.2
• /
• pp.1-10
• /
• 2015

Promising onshore wind farm sites in Gangwon province of Korea were investigated in this study. Gangwon province was divided into twenty five simulation regions and a commercial program based on Reynolds averaged Navier-Stokes equation was used to find out wind resource maps of the regions. The national wind atlas with a period 2007-2009 developed by Korea institute of energy research was used as climatologies. The wind resource maps were combined to construct a wind resource map of Gangwon province with a horizontal spatial resolution of 100m. In addition to the wind resource, national environmental zoning map, distance from substation, residence and automobile road, Beakdudaegan mountain range, terrain slope, airport and military reservation district were considered to find out promising wind farm sites. A commercial wind farm design program was used to find out developable wind farm capacities in promising wind farm site with and without excluding environmental protection regions. The total wind farm capacities with and without excluding the protection regions were estimated to be 46MW and 598MW, respectively, when a 2MW commercial wind turbine was employed.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.283-289
• /
• 2017

This study examines the impact of dance in dance viral convergence advertising. Dance viral images appeal to a wide range of consumers. Especially, Dong-A Otsuka's Oronamin C ad released in 2015 achieved great results and won an advertisement award with an addictive CM song and dance. So this study selected the advertisements of Oronnamin C from 2015 to 2017 for its analysis. The theoretical background is analyzed through the element of dance choreography and characteristics. The results of the analysis of ads showed that they were made of simple and repetitive situations, which are the characteristics of dance comic style. There was little shift in space, choreography was mainly based on one straight line but with a crowded group, circle and V-shape appeared. Spatial composition was mainly first-person point of view. In the dance viral ads , dances were composed of short rhythmic phrases with simple and repetitive elements, eliminating complicated elements.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.30-36
• /
• 2015

The Leadership in Energy and Environmental Design (LEED) has provided abundant resources and guidelines for a new project to become a sustainable anchor in the neighborhood. Paired with a range of checklist, LEED has strong influence on the standards for a sustainable building, and it also has played an iconic role in energy-efficient architecture. However, it is still unclear as to whether or not an LEED certified building enhances environmental benefits to its surroundings. If an LEED certification promises a baseline for an eco-friendly building, then a group of these structures should ensure significant environmental benefits to the society. This is the main question of this study, and the authors answer this hypothesis by examining the relationship of LEED certificates and their influence on outdoor temperature, especially in terms of urban heat island effect. The goal of this paper is to analyze the influence of the LEED certification on urban temperature as an indicator of sustainable architecture's regional interactions. If an LEED certificate is regarded as a strong contributor to a sustainable built environment, then a group of these certificates should result in greater benefits to society. To this extent, the authors question if there is any possible relationship between a large concentration of LEED certified sites and the temperature of their surroundings. To properly assess the research direction, Global Moran's I analysis, Local Moran's I analysis, and Hot Spot analysis are implemented to find the clustered areas of LEED certified buildings. For examining relationships between clustered area and its temperature, correlation efficients are calculated.