• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.473-481
• /
• 1999

We propose a new scheme of hologram multiplexing that can improve the crosstalk noise in the conventional phase-code multiplexing. Our method is based on the idea that the separate holograms to be stored in a certain region of the photorefractve material should have relative phase other than $180^{\circ}$. To demonstrate the new idea we fabricate a phase spatial light modulator using piezo-electric material. The experimental result shows that the crosstalk noise in the restored holograms is reduced much in our method. We also computer simulate the hologram multiplexing and compare the result with the experimental data.l data.

• Journal of The Korean Astronomical Society
• /
• v.49 no.4
• /
• pp.157-162
• /
• 2016

High resolution reconstruction technology is developed to help enhance the spatial resolution of observational images for ground-based solar telescopes, such as speckle masking. Near real-time reconstruction performance is achieved on a high performance cluster using the Message Passing Interface (MPI). However, much time is spent in reconstructing solar subimages in such a speckle reconstruction. We design and implement a novel parallel method for speckle masking reconstruction of solar subimage on a shared memory machine using the OpenMP. Real tests are performed to verify the correctness of our codes. We present the details of several parallel reconstruction steps. The parallel implementation between various modules shows a great speed increase as compared to single thread serial implementation, and a speedup of about 2.5 is achieved in one subimage reconstruction. The timing result for reconstructing one subimage with 256×256 pixels shows a clear advantage with greater number of threads. This novel parallel method can be valuable in real-time reconstruction of solar images, especially after porting to a high performance cluster.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.7
• /
• pp.1030-1040
• /
• 1998

One of the main unresolved issues in large-eddy simulation(LES) of wall-bounded turbulent flows is the requirement of high spatial resolution in the near-wall region, especially in the spanwise direction. Such high resolution required in the near-wall region is generally used throughout the computational domain, making simulations of high Reynolds number, complex-geometry flows prohibitive. A grid-embedding strategy using a nonconforming spectral domain-decomposition method is proposed to address this limitation. This method provides an efficient way of clustering grid points in the near-wall region with spectral accuracy. LES of transitional and turbulent channel flow has been performed to evaluate the proposed grid-embedding technique. The computational domain is divided into three subdomains to resolve the near-wall regions in the spanwise direction. Spectral patching collocation methods are used for the grid-embedding and appropriate conditions are suggested for the interface matching. Results of LES using the grid-embedding strategy are promising compared to LES of global spectral method and direct numerical simulation. Overall, the results show that the spectral domain-decomposition grid-embedding technique provides an efficient method for resolving the near-wall region in LES of complex flows of engineering interest, allowing significant savings in the computational CPU and memory.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.193-205
• /
• 1997

It is required for multi-users to share massive mapping data effectively that distributed data model in the Client-Server environment is developed for the replication consistency. The existing model is not effective to the long transaction just like a mapping system, since it does not account lot consistency between GUI screen and database replications even though it emphasizes on the replication consistency. The performance of concurrency control is very important for those long transactions, especially the mapping systems. This model is to support consistency between GUI screen and replicas using display locks. It suggests consistency model improving process performance by modifying memory consistency model and optimistic concurrency control for mapping data's characteristics.

• Journal of Computing Science and Engineering
• /
• v.7 no.1
• /
• pp.53-66
• /
• 2013

Bounding the worst-case DRAM performance for a real-time application is a challenging problem that is critical for computing worst-case execution time (WCET), especially for multicore processors, where the DRAM memory is usually shared by all of the cores. Typically, DRAM commands from consecutive DRAM accesses can be pipelined on DRAM devices according to the spatial locality of the data fetched by them. By considering the effect of DRAM command pipelining, we propose a basic approach to bounding the worst-case DRAM performance. An enhanced approach is proposed to reduce the overestimation from the invalid DRAM access sequences by checking the timing order of the co-running applications on a dual-core processor. Compared with the conservative approach, which assumes that no DRAM command pipelining exists, our experimental results show that the basic approach can bound the WCET more tightly, by 15.73% on average. The experimental results also indicate that the enhanced approach can further improve the tightness of WCET by 4.23% on average as compared to the basic approach.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.317-327
• /
• 2014

In order to develop nano-devices with much lower power consumption for beyond-CMOS applications, the fundamental understanding and precise control of the electronic properties of ultrathin transition metal oxide (TMO) films are strongly required. The metal-insulator transition (MIT) is not only an important issue in solid state physics, but also a useful phenomenon for device applications like switching or memory devices. For potential use in such application, the electronic structures of MIT, observed for TMO nano-structures, have been investigated using a synchrotron radiation angle-resolved photoelectron spectroscopy system combined with a laser molecular beam epitaxy chamber and a scanning photoelectron microscopy system with 70 nm spatial resolution. In this review article, electronic structures revealed by soft X-ray nano-spectroscopy are presented for i) polarity-dependent MIT and thickness-dependent MIT of TMO ultrathin films of $LaAlO_3/SrTiO_3$ and $SrVO_3/SrTiO_3$, respectively, and ii) electric field-induced MIT of TMO nano-structures showing resistance switching behaviors due to interfacial redox reactions and/or filamentary path formation. These electronic structures have been successfully correlated with the electrical properties of nano-structured films and nano-devices.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.131-137
• /
• 2009

Recent technological advances made a vehicle more intelligent to increase safety and comfort. An intelligent vehicle provides drivers with safety warning information through audible sounds, visual displays, and tactile devices. However, elderly drivers have been known to decrease the physical and cognitive abilities such as muscular strength, hearing, eyesight, short term memory, and spatial perception. Therefore, possible age-related deficits should be considered to design an effective warning system. This paper aims to evaluate the impact of advancing age on response performance on audible safety warnings which are widely used for alerting driving hazards. In order to understand the effect of age-related hearing loss and movement slowing, three sound characteristics (frequency, intensity, and period) and three age groups (younger, middle, and older) are considered. Data was drawn from 38 drivers who drove a simulated rural road in a driving simulator. Experimental results show that age influences driver's response performance. In conclusion, the appropriate range of a warning sound is suggested.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2003.11a
• /
• pp.123-128
• /
• 2003

최근 프로세서와 메인 메모리간의 속도 차이가 커지면서 캐시 실패가 메인 메모리에서 동작하는 R-Tree의 성능 저하에 미치는 영향이 커짐에 따라 캐시 실패를 줄여 캐시 성능을 개선하려는 연구가 많이 진행되고 있다. 일반적인 캐시 성능 개선 방법은 엔트리 정보를 줄설 노드에 더 않은 엔트리를 저장함으로써 펜-아웃(fanout)을 증가시키고 캐시 실패를 최소화한다. 그러나 이러한 방법은 엔트리 정보를 줄이는 추가 연산으로 인해 갱신 성능이 떨어지고, 노드간 이동시 발생하는 캐시 실패는 여전히 해결하지 못하고 있다. 본 논문은 이를 해결하기 위해 선반입(prefetching)을 적용한 확장된 R-Tree인 PR-tree(Prefetching R-Tree)를 제안하고 평가하였다 PR-Tree는 펜-아웃을 증가시키고 트리의 높이를 낮추기 위해 실제 캐시 라인의 정수 배인 노드를 생성하고, 선반입을 적용하여 노드 캐시로 인한 메모리 지연을 최소화하였다. 또한 접근할 노드를 선반입하여 노드간 이동시 발생하는 캐시 실패도 최소화하였다. PR-Tree는 실험에서 R-Tree보다 검색 연산에서 최대 38%의 성능 향상을 보였으며, 갱신 연산에서도 최대 30%의 성능 향상을 보였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.61-66
• /
• 2009

This Paper describes a new program called DEM Generator need to process DEM from LiDAR data or digital map data. It is difficult to generate raster DEM from LiDAR mass point data sets and digital maps too large to fit into memory. The DEM Generator was designed to process DEM and shaded relief image of GeoTiff format in order of streaming meshes; I/O minimize tag, delaunay triangle, natural neighborhood or TIN, temporary files and grid. It is expected that we can be improved the precision of DEM and solved the time consuming problem of DEM generating of a wider area.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.56-64
• /
• 1996

A large amount of papers about the cubic-to-tetragonal phase transition the ferroelectric domain structures of the BaTiO3 were already reported but there exist still some needs to observe the domain behaviors directly. In this study the domain structures of the tinned plates prepared from ta single crystal grown by the TSSG technique were observed using a polarizing microscope TE and X-ray topography. The spatial relation be-tween the orientation states of domains was investigated and the effects of external stresses and electric fields on the behaviors of ferroelectric and ferroelastic domains were studied. All the 90$^{\circ}$walls cut off in the crystal are the wedge shaped lamellar domains and all the straight boundaries in the observed domain patte군 can be interpreted as the head-to-tail 90$^{\circ}$walls. The irregular overlapped boundaries commonly observed by using a polarizing microscope and X-ray topography are complex combinations of well-known 90$^{\circ}$walls and are domain walls were predominant and were stabilized after surface polishing. In the paraelectric phase region the domain walls vanished but the residual surface strain patterns could be seen at the same positions of the stabilized 90$^{\circ}$a-a walls in the tetragonal phase region, These stabilized walls resulted from the surface strain had a memory effect in domain formation during the repeated phase transitions and could notr be affected by an external electtric field.