• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.111-126
• /
• 2017

Small-scale UAS(Fusion technique of Unmanned Aerial Vehicles platform and Sensors, 'sUAS') opens various new applications in construction fields and so becoming progressively common due to the considerable potentials in terms of accuracy, costs and abilities. The purpose of this study is that the investigation of the validation on the utilization of sUAS for earth stockpile volume calculations on sites. For this, generate 3D models(DSM) with sUAS aerial images on an cone shaped soil stockpile approximately $270m{\times}300m{\times}20m$, which located at Baegot Life Park in Siheung-si, compared stockpile volume estimates produced by sUAS image analysis, against volume estimates obtained by GNSS Network-RTK ground surveying method which selected as the criteria of earth stockpile volume. The result through comparison and examination show(demonstrate) that there was under 2% difference between the volume calculated with the GNSS Network RTK data and the sUAV data, especially sUAS imaged-based volume estimate of a stockpile can be greatly simplified, done quickly, and very cost effective over conventional terrestrial survey methods. Therefore, with consideration of various plan to assess the height of vegetation, sUAS image-based application expected very useful both volume estimate and 3D geospatial information extraction in small and medium-sized sites.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.17-26
• /
• 1998

Ultrasonic sensors are widely used in various applications due to advantages of low cost, simplicity in construction, mechanical robustness, and little environmental restriction in usage. But for the application of object recognition, ultrasonic sensors exhibit several shortcomings of poor directionality which results in low spatial resolution of objects, and specularity which gives frequent erroneous range readings. The time-of-flight(TOF) method generally used for distance measurement can not distinguish small object patterns of plane, corner or edge. To resolve the problem, an increased number of the sensors in the forms of a linear array or 2-dimensional array of the sensors has been used. Also better resolution has been obtained by shifting the array in several steps using mechanical actuators. Also simple patterns are classified based on analyzing signal reflections. In this paper we propose a method of a sensor array system with improved capability in pattern distinction using electronic circuits accompanying the sensor array, and intelligent algorithm based on neuro-fuzzy processing of data fusion. The circuit changes transmitter output voltages of array elements in several steps. A set of different return signals from neighborhood sensors is manipulated to provide enhanced pattern recognition in the aspects of inclination angle, size and shift as well as distance of objects. The results show improved resolution of the measurements for smaller targets.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.51-55
• /
• 2003

본 연구는 조사대상지역인 전라남도 해남군 전역에 대해 현장조사된 지질 및 지하수 양수량 자료등과 같은 수리정보를 종합적으로 분석하고 이를 Landsat 영상자료과의 영상융합 과정을 통해 지하수 부존가능성에 대한 수리 지질 지표정보로 추출함으로서 지하수 특성정보를 위성영상정보와 연계하여 효과적으로 도시하고자 하였다. 현장조사시 획득된 자료는 해남지역을 11개 소유역으로 구분한 후 각 구역에 대한 2000여개 관점에서 측정된 양수량과 안정지하수위를 이용하여 산출한 비용출량 자료(groundwater specific capacity)와 각 소 유역 (unit watershed)에 대한 선구조 분석자료, 지질별 분포, 정밀고도자료를 추출하여 산출한 고도, 경사도 분포, 수계패턴과 수계밀도로서 이를 통합적으로 분석하여 해남지역에 대한 지하수 특성을 파악하고자 하였다. 위성영상자료의 처리과정은 Landsat 5 TM 영상자료는 '86. 12. 11 및 '98. 12. 28에 촬영된 WRS(World Reference System) Row-Path116-36로서, 1986년 영상은 12년 차이의 해남의 변화지역을 탐지하기 위한 영상자료로서 활용하였으며 98년 영상을 주요 분석 자료로 이용하였으며 지표 이용정보 추출은 크게 수역추출, 식생분포추출, 지표분류도, 변화탐지영역추출로 구분된다. 본 연구방법은 크게 위성영상분석을 통해 추출된 정보와 지표조사를 통해 획득된 선구조 및 지하수 정보를 Data fusion 방식으로 이용되고 있는 IHS 변환 기법을 통해 본 역에 대한 지하수 정보 및 간척지 등에 의한 지표 개발에 따른 지하수 부존 가능성을 탐색하기 위한 현황을 효과적인 자료로 표현하고자 하였다.및 스페클 잡영 제거 정도에 있어 다른 필터들과 큰 차이가 없지만 경계선보존지수는 다른 필터들에 비하여 가장 우수함을 확인할 수 있었다.rbon 탐식효율을 조사한 결과 B, D 및 E 분획에서 유의적인 효과를 나타내었다. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On th

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.2
• /
• pp.13-19
• /
• 2017

This paper analyzed MODIS data from 2006 to 2013 to determine relationship between meteorological changes and vegetation index. The experimental area was divided into the northern, central and southern regions according to the regional characteristics, and the smoothed MODIS LAI and NDVI were obtained using Timesat. In the case of precipitation, MODIS NDVI had correlation coefficients of 0.66, 0.44 and 0.35 in the northern, central and southern regions and the correlation was the highest in the northern region. In the case of temperature, MODIS LAI had correlation coefficients of 0.66, 0.64 and 0.68, and MODIS NDVI had 0.89, 0.89 and 0.80. The correlation of MODIS NDVI was higher and showed similar positive correlation regardless of region. In addition, The accuracy between Timesat plant seasonal start and actual plant seasonal start in MODIS NDVI was higher than MODIS LAI. The average error in MODIS LAI was 19 days in the central region and 20 days in the southern region. And the average error in MODIS NDVI was 6 days in the central region and 8 days in the southern region.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.49-58
• /
• 2015

Up to the present point in time, the level diagnosis system for urban reactivation have utilized various methods for establishment and management in Korea and overseas, such as city competitiveness evaluation, urban decay diagnosis, etc. However, contrary to performing diagnosis and evaluations on general cities in existing studies, it is found to be a very complex and difficult task to perform a diagnosis on the level of U-City due to its unique characteristics. It is difficult to determine the level of a U-City using a level diagnosis system used for general cities because a U-City is comprised of a connection/fusion of various structural elements. Therefore, in order to perform a systematic diagnosis of a U-City, it is necessary to primarily observe the structural characteristics of a U-city to derive a diagnosis system based on the relativity between each structural element. This study aims to propose a directivity of a U-City level diagnosis system in comprehensive consideration of various elements, such as the objective of a U-City, as well as the structural elements that compose a U-City based on the definitions prescribed in U-City legislations, including ubiquitous city planning, ubiquitous city infrastructure, ubiquitous city technology, services, etc. The results of this study are expected to provide a resolution for the regional quality differences of U-Cities, and also establish a stepping-stone for the realization of U-Cities with high degree of completion.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.189-203
• /
• 2013

The purpose of this study is to build a GIS database that can utilized to provide a multi-dimensional analysis of aquatic health ecosystem. Especially, it was to build a GIS database for comprehensive analysis using the aquatic ecosystem health. So we collected data on aquatic ecosystem health assessment, Korea Reach File(KRF), Stream Naturalness and Water Environmental Information System, and detailed analysis of the collected data was performed. In addition, the core objects were extracted from individual data and a related entity was derived by pulling out the items associated with thematic characteristics and classifying them. The establishment of GIS database makes it possible to support the decision making for the user to quickly understand the information of water environment. Therefore, the database will provide the information for the effective management on water environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.117-132
• /
• 2014

This paper had a purpose on analyzing result data from pan-sharpening, which have applied on the KOMPSAT-2 and -3 image. Particularly, the study focused on comparing each relative spectral response functions, which considers to cause color distortions of fused image. Two images from same time and location have been collected by KOMPSAT-2 and -3 to apply in the experiment. State-of-the-art algorithms of GIHS, GS1, GSA and GSA-CA were employed for analyzing the results in quantitatively and qualitatively. Following analysis of previous studies, GSA and GSA-CA methods resulted excellent quality in both of KOMPSAT-2/3 results, since they minimize spectral discordances between intensity and PAN image by the linear regression algorithm. It is notable that performances from KOMPSAT-2 and- 3 are not equal under same circumstances because of different spectral characteristics. In fact, KOMPSAT-2 is known as over-injection of low spatial resolution components of blue and green band, are greater than that of the PAN band. KOMPSAT-3, however, has been advanced in most of misperformances and weaknesses comparing from the KOMPSAT-2.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.593-603
• /
• 2010

Most spatial data acquisition systems employing a set of frame cameras may have suffered from their small fields of view and poor base-distance ratio. These limitations can be significantly reduced by employing an omni-directional camera that is capable of acquiring images in every direction. Bundle Block Adjustment (BBA) is one of the existing georeferencing methods to determine the exterior orientation parameters of two or more images. In this study, by extending the concept of the traditional BBA method, we attempt to develop a mathematical model of BBA for omni-directional images. The proposed mathematical model includes three main parts; observation equations based on the collinearity equations newly derived for omni-directional images, stochastic constraints imposed from GPS/INS data and GCPs. We also report the experimental results from the application of our proposed BBA to the real data obtained mainly in urban areas. With the different combinations of the constraints, we applied four different types of mathematical models. With the type where only GCPs are used as the constraints, the proposed BBA can provide the most accurate results, ${\pm}5cm$ of RMSE in the estimated ground point coordinates. In future, we plan to perform more sophisticated lens calibration for the omni-directional camera to improve the georeferencing accuracy of omni-directional images. These georeferenced omni-directional images can be effectively utilized for city modelling, particularly autonomous texture mapping for realistic street view.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.141-152
• /
• 2008

The 3D building modeling is one of crucial components in constructing 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes, which indeed take great amount of time and efforts. In recent years, many researches on 3D building modeling using aerial LiDAR data have been actively performed to aim at overcoming the limitations of existing 3D building modeling methods. Either techniques with interpolated grid data or data fusion with digital map and images have been investigated in most of existing researches on 3D building modeling with aerial LiDAR data. The paper proposed a method of 3D building modeling with LiDAR data only. Firstly, octree-based segmentation is applied recursively to LiDAR data classified as buildings in 3D space until there are no more LiDAR points to be segmented. Once octree-based segmentation is completed, each segmented patch is thereafter merged together based on its geometric spatial characteristics. Secondly, building model components are created with merged patches. Finally, a 3D building model is generated and composed with building model components. The experimental results with real LiDAR data showed that the proposed method was capable of modeling various types of 3D buildings.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.847-859
• /
• 2021

Recently, as the number of high-resolution satellite SAR images increases, the demand for precise matching of SAR imagesin change detection and image fusion is consistently increasing. RMSE (Root Mean Square Error) values using GCPs (Ground Control Points) selected by analysts have been widely used for quantitative evaluation of image registration results, while it is difficult to find an approach for automatically measuring the registration accuracy. In this study, a feasibility analysis was conducted on using the FSIM (Feature Similarity) index as a measure to evaluate the registration accuracy. TerraSAR-X (TSX) staring spotlight data collected from various incidence angles and orbit directions were used for the analysis. FSIM was almost independent on the spatial resolution of the SAR image. Using a single SAR image, the FSIM with respect to registration errors was analyzed, then use it to compare with the value estimated from TSX data with different imaging geometry. FSIM index slightly decreased due to the differencesin imaging geometry such as different look angles, different orbit tracks. As the result of analyzing the FSIM value by land cover type, the change in the FSIM index according to the co-registration error was most evident in the urban area. Therefore, the FSIM index calculated in the urban was mostsuitable for determining the accuracy of image registration. It islikely that the FSIM index has sufficient potential to be used as an index for the co-registration accuracy of SAR image.