• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.100-101
• /
• 2014

The generation of 3D models for freeform buildings is an important task while continuous monitoring of the related spatial information at different time phases. Realistic models of freeform building have to provide high geometric accuracy and detail at an effective data size.(Al-kheder, S. 2008) The efficiency of this image-based technique has been increased considerably by the development of digital technologies. Furthermore, 3D data collection based on laser scanning has become an high quality 3D models for construction site. Therefore, in this research, we have an effort to review construction methods to make freeform envelope of building using 3D scanning technology.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.176-188
• /
• 2002

This paper presents results of continuous wave and swept frequency response measurements over the frequency range of UNII lower and middle bands from 5.15GHz to 5.35GHz in indoor environments. From the continuous wave measurements at 5.2GHz, the excess path loss, and the statistical characteristics of the temporal and spatial fading were found. By sweeping the frequency over the band, envelope correlation as a function of frequency was found and the coherence bandwidth (CBW) was determined from the envelope correlation. Using a channel model, the CBW was used to evaluate RMS delay spread. The dependence of CBW on the antenna polarization was simulated and compared with the measurement results. The influence of room size and separation of transmitter and receiver for LOS paths on RMS delay spread was discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.1
• /
• pp.77-84
• /
• 2023

In this study, the performance evaluation of the RC frame specimen (RV2) which was strengthened by a steel frame and a steel damper with the lateral deformation prevention details proceeded. The comparison objects are bare frame specimen (BF), RV2 and AWD, where AWD is a specimen reinforced with steel damper and aramid fiber sheets. In the evaluation of envelope curve, stiffness degradation, and energy dissipation capacity, RV2 was evaluated to have excellent capacity as a whole. To evaluate the strengthening effect of the steel frame based on the maximum strength and energy dissipation capacity, it was evaluated to have a 38% of the RV2's capacity.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.4
• /
• pp.71-79
• /
• 2023

In this study, a prefabricated buckling brace (PF-BRB) was proposed, and a test specimen was manufactured based on the design formula for the initial shape and structural performance tests were performed. As a result of the experiment, all standard performance requirements presented by KDS 41 17 00 and MOE 2021 were satisfied before and after replacement of the reinforcement module, and no fracture of the joint module occurred. As a result of the incremental load test, the physical properties showed a significant difference in the stiffness ratio after yielding under the compressive load of the envelope according to the experimental results. It is judged necessary to further analyze the physical properties according to the experimental results through finite element analysis in the future.

• Architectural research
• /
• v.1 no.1
• /
• pp.31-40
• /
• 1999

In this age of "Information", many people consider it a deterrent to information flow to provide a hierarchy with private rooms in a modern office layout. There are others, however, who insist that visual and acoustical privacy are more important than any other design factor in achieving higher productivity. The debate may never end, but the partitioned open plan, which is a new form of the vast open plan, has merits of each concept - open and closed layout. Consequently, office design has dramatically shifted to partitioned open planning, with shorter, temporary walls or partitions, originally intended for increasing privacy and diminishing hierarchy, yet still keeping flexibility in spatial organization. The introduction of low-level partitioned spaces in an office layout, however, produces a complicated lighting design problem. Obviously, accurately predicted daylighting performance data are needed not only for daylighting design but for artificial lighting system design. Scale models of 12 sets of unit partitioned spaces are constructed and extensive scale model measurements of both daylight and reflected sunlight have been performed within an artificial sky simulator. The prototype-building interior is modeled with different partition configurations, each of which is modeled using the different envelope geometry and exterior configurations, and then the variations in interior light levels are estimated. The result indicates that partitioned spaces employed in an open plan of modern offices still offer a large potential for daylighting and energy saving as well. Much of the savings may derive from the cumulative effect of reflected sunlight. Optimal design for building envelope geometry and exterior configuration promises additional savings.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.11-21
• /
• 2021

The causes of noise generation according to the classification of indoor spaces are very diverse. Individual happiness is infringed by this noise. In this paper, We tried to visualize the spatial sound characteristics of public places using sound color to express them so that anyone can sympathize. The noise inside a conference room of a medical device company was measured for 100 minutes, and the frequency band was divided into three different types of existing sound pressure expression units. Because the size of the noise is expressed differently depending on the situation, There are cases where there is a difference of opinion between the measurer and the researcher. This noise measurement experiment was conducted, and the sound color was applied to classify it on a log scale considering auditory characteristics. As a result of comparing this with the result expression for different loudness expression units, A specific table in different units yielded almost similar results. In addition, the sound source section for 100 minutes was divided into three analysis sections, the analysis sections were different, and the size of the energy ratio for each analysis section was divided in the form of an envelope. The characteristics of the low-frequency region of the space have a high energy ratio, and the decrease in the energy ratio according to the increase in frequency is constant and regular. You can see that conversations are possible.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.651-668
• /
• 2014

Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.67.2-67.2
• /
• 2019

We present the results of KVN and ALMA observations toward WX Psc (IRC+10011) which is a long-period variable OH/IR star. The SiO masers of v=1 and v=2, J=5-4, and the SiO thermal emission of v=0, J=5-4 were observed together with H2O v2=1 (232.6 GHz) and continuum emission at ALMA Band 6 in October 2017 (Cycle 5). This observation aims to investigate the physical association between the inner and outer parts of the circumstellar envelope (CSE) swept by the stellar winds, which is very crucial to understand the asymmetric outward motions developed during the evolutionary phases from the asymptotic giant branch (AGB) stars to the planetary nebulae (PNe). The strong SiO maser features and thermal emissions are detected together with the continuum emission in ALMA observation, which imply the elongated morphology of the CSE of WX Psc. While the spatial resolution of about 20 mas in ALMA observation cannot clearly resolve the detailed characteristics of the inner part of the CSE, the Korean VLBI Network (KVN) observations show the spatial distributions of the v=1 J=1-0, J=2-1, J=3-2 SiO masers emitted from the inner regions of CSE, which are the complementary to the ALMA results. Therefore, we expect these results reveal how the bipolar features of the 22 GHz H2O maser are connected to the innermost region of CSE through the dust condensation region, which is closely related to the enormous mass ejection of the evolved stars.

• Architectural research
• /
• v.18 no.4
• /
• pp.171-178
• /
• 2016

Architectural utility in Richard Neutra's early twentieth century modern school design was paramount in progressively shaping salience of academic institutions, in part to move beyond neoclassical traditions in style based design. The intention being to address school and community through modern architectural solutions. Expanding on Neutra's practice, the planning and design of new public schools in Los Angeles, are advocating the integration of institutional and public spaces. This research will document through qualitative analysis of institutional design within transitioning neighborhoods, a utilitarian approach that has become foundational for positive urban change. The focus of this research will reflect upon contemporary schools designed by DalyGenik Architecture, Coop Himmelblau and Michael Maltzen Architecture. Comparing with Neutra's early modernist approach, the selected case studies will address material and spatial applications having redefined functional relationships of interior space, architectural envelope and an interconnected public realm. A dynamic peripheral condition in new school design has emerged with the elimination of decorative adornment, clarifying utilitarian intentions of institutional service to and the rejuvenation of public realms and community spaces.