• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.473-479
• /
• 2019

다양한 촬영 조건의 CT 감쇠 지도가 PET 영상에 영향을 미치는지 알아보기 위하여 다양한 kVp와 mA조건에서 Uniformity phantom 영상의 신호 강도(SI; Signal Intensity)와 표준 섭취율 계수(SUV; Standardized Uptake Value)를 측정하고, CTDI (Computed Tomography Dose Index)를 통해 각 조건에 따른 피폭선량을 측정하였다. 또한 동일한 조건에서 Resolution phantom의 반치폭(FWHM; Full Width at Half Maximum)을 측정하여 CT의 kVp와 mA에 따른 PET 영상의 화질 변화에 대하여 정량적으로 알아보고자 하였다. 연구 결과, CT의 촬영 조건은 PET 영상에는 영향을 주지 않는 것으로 나타났으나, CT의 촬영 조건이 감소하게 되면 방사선 피폭이 감소하게 되지만 영상에 영향을 미치게 되므로 향후 진단이 가능한 CT 화질을 유지하면서 방사선 피폭을 최소화할 수 있는 양전자 방출 단층 촬영(PET/CT; Positron Emission Tomography / Computed Tomography)의 촬영 조건에 대한 연구가 지속적으로 되어야 할 것이다.

• Journal of Radiation Protection and Research
• /
• 제20권4호
• /
• pp.227-236
• /
• 1995

선량데이타와 정확한 3차원 선량모델을 이용하여 여러 아크에 대한 선량분포를 조사하였다. 정확한 선량모델에 의해 계산된 선량 값은 판단한 실험식으로 표현이 가능했으며 이는 선량 최적화 과정에서 반복적으로 선량 값을 계산하는데 매우 유용하였다. 360도 아크와 부분 아크에 대한 선량 값을 빠른 속도로 계산하기 위하며 실험적으로 구해진 실린더형 선량모델을 개발하였다. 200개 위치의 정확한 선량 값을 비선형식으로 피팅하여 7개의 변수를 포함하는 실험식을 개발하였다. 결과적으로 이 모델을 이용하는 경우 한 아크에 대한 선량 계산시 400개의 위치를 계산하는데 PC-486으로 1초 이내에서 계산이 가능하였다. 결론적으로 개발된 고속선량모델은 정확한 선량모델에 의한 선량 값과 유사한 값을 제공함으로써 계간속도가 늦은 일반 3차원 선량모델을 대치할 수 있을 것으로 사려된다.

• Korean Journal of Radiology
• /
• 제23권9호
• /
• pp.854-865
• /
• 2022

Photon-counting detector (PCD) CT is a new CT technology utilizing a direct conversion X-ray detector, where incident X-ray photon energies are directly recorded as electronical signals. The design of the photon-counting detector itself facilitates improvements in spatial resolution (via smaller detector pixel design) and iodine signal (via count weighting) while still permitting multi-energy imaging. PCD-CT can eliminate electronic noise and reduce artifacts due to the use of energy thresholds. Improved dose efficiency is important for low dose CT and pediatric imaging. The ultra-high spatial resolution of PCD-CT design permits lower dose scanning for all body regions and is particularly helpful in identifying important imaging findings in thoracic and musculoskeletal CT. Improved iodine signal may be helpful for low contrast tasks in abdominal imaging. Virtual monoenergetic images and material classification will assist with numerous diagnostic tasks in abdominal, musculoskeletal, and cardiovascular imaging. Dual-source PCD-CT permits multi-energy CT images of the heart and coronary arteries at high temporal resolution. In this special review article, we review the clinical benefits of this technology across a wide variety of radiological subspecialties.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권1호
• /
• pp.23-26
• /
• 2001

The spatial distribution of the scattered dose for mobile X-ray radiography is measured. The scattered X-ray exposures at the radius of 50, 100 and 150 cm from the irradiation center are 880, 180 and $50\;{\mu}R$, respectively. This scattered X-rays can be reduced to 60% by inserting the portable shield made by 0.4 mm copper sheet sandwiched in two plywoods.

• 한국의학물리학회지:의학물리
• /
• 제30권4호
• /
• pp.160-166
• /
• 2019

This study examined the clinical use of two newly installed computed tomography (CT) simulators in the Department of Radiation Oncology. The accreditation procedure was performed by the Korean Institute for Accreditation of Medical Imaging. An Xi R/F dosimeter was used to measure the CT dose index for each plug of the CT dose index phantom. Image qualities such as the Hounsfield unit (HU) value of water, noise level, homogeneity, existence of artifacts, spatial resolution, contrast, and slice thickness were evaluated by scanning a CT performance phantom. All test items were evaluated as to whether they were within the required tolerance level. CT calibration curves-the relationship between CT number and relative electron density-were obtained for dose calculations in the treatment planning system. The positional accuracy of the lasers was also evaluated. The volume CT dose indices for the head phantom were 22.26 mGy and 23.70 mGy, and those for body phantom were 12.30 mGy and 12.99 mGy for the first and second CT simulators, respectively. HU accuracy, noise, and homogeneity for the first CT simulator were -0.2 HU, 4.9 HU, and 0.69 HU, respectively, while those for second CT simulator were 1.9 HU, 4.9 HU, and 0.70 HU, respectively. Five air-filled holes with a diameter of 1.00 mm were used for assessment of spatial resolution and a low contrast object with a diameter of 6.4 mm was clearly discernible by both CT scanners. Both CT simulators exhibited comparable performance and are acceptable for clinical use.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.964-965
• /
• 2005

• International Journal of Advanced Culture Technology
• /
• 제12권2호
• /
• pp.368-374
• /
• 2024

During an X-ray examination, the beam of radiation is dispersed in many directions. We believe that managing radiation dose is about providing transparency to users and patients in the accurate investigation and analysis of radiation dose. The purpose of measuring the radiation dose as a function of location is to ensure that medical personnel using the equipment or participating in the operating room are minimally harmed by the different radiation doses depending on their location. Four mobile diagnostic X-ray units were used to analyze the radiation dose depending on the spatial location. The image intensifier and the flat panel detector type that receives the image analyzed the dose by angle to measure the distribution of the exposure dose by location. The radiation equipment used was composed of four units, and measuring devices were installed according to the location. The X-ray (C-arm) was measured by varying the position from 0 to 360 degrees, and the highest dose was measured at the center position based on the abdominal position, and the highest dose was measured at the 90° position for the head position when using the image intensifier equipment. The operator or medical staff can see that the radiation dose varies depending on the position of the diagnostic radiation generator. In the image intensifier and flat panel detector type that accepts images, the dose by angle was analyzed for the distribution of exposed dose by position, and the measurement method should be changed according to the provision of dose information that is different from the dose output from the equipment according to the position.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.397-403
• /
• 2018

Mobile X-ray generators are used not in the radiation area but in open space, which causes the exposure of secondary radiation to the healthcare professionals, patients, guardians, etc., regardless of their intentions. This study aimed to investigate the shielding effect of the developed radiation restrictor to block the secondary radiation scattered during the use of mobile X-ray generator. Upon setting the condition of mobile X-ray generator with chest AP, spatial doses were measured by the existence of human equivalent phantom and radiation restrictor, and measured by the existences of phantom and radiation restrictor at the same length of 100 cm. Measurements were taken at intervals of 10 cm every $30^{\circ}$ from $-90^{\circ}$ (head direction) to $+90^{\circ}$ (body direction). Upon the study results, spatial doses in all direction were increased by 45% on average when using phantom in the same condition, however, they were decreased by 64% on average when using the developed radiation restrictor. The dose at 100 cm from the center of X-ray was $3.0{\pm}0.08{\mu}Gy$ without phantom and was increased by 40% with $4.2{\pm}0.08{\mu}Gy$ after phantom usage. The dose when using phantom and the developed radiation restrictor was $1.4{\pm}0.08{\mu}Gy$, which was decreased by 66% compared to the case without using them. Therefore, it is considered the scattered radiation can be shielded at 100-150 cm, the regulation of the distance between beds, effectively with the developed radiation restrictor when using mobile X-ray generators, which can lower the radiation exposure to the people nearby including healthcare professionals and patients.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.803-811
• /
• 2021

본 연구에서는 공정 시뮬레이션 기술을 적용하여 조사유기응력부식균열 시험 작업자의 피폭량 평가를 하였다. 상용 공정 시뮬레이션 코드인 DELMIA Version 5를 사용하여 조사유기응력부식균열 분석 시험 설비, 핫셀 및 작업자를 작성하고 조사유기응력부식균열 시험 공정을 구현하였으며, 사용자 코딩을 통해 선량이 분포된 공간을 지나는 작업자의 누적 피폭량을 평가할 수 있도록 하였다. 작업자 모사를 위해 시험 공정별로 인체의 근골격계를 모방하여 약 200 개 이상의 자유도를 가지는 휴먼 마니킨 자세를 작성하였다. 작업자 피폭량 계산을 위하여 휴먼 마니킨 작업의 하위정보에 접근하여 자세 별 좌표, 시작 시간 및 유지 시간을 추출하였으며, 공간 선량 값과 자세 유지 시간을 곱하여 누적 피폭량을 계산하였다. 피폭량 평가를 위한 공간 선량은 MCNP6 Version 1.0을 사용하여 핫셀 내·외부 공간 선량을 계산하였으며, 계산된 공간 선량은 공정 시뮬레이션 도메인에 입력하였다. 공정 시뮬레이션을 이용한 피폭량 평가 결과와 전형적인 피폭량 평가 결과를 비교 분석한 결과, 상시 출입구역 내 일상 시험 작업에 대한 연간 피폭량은 각각 0.388 mSv/year 및 1.334 mSv/year로서 공정 시뮬레이션을 이용한 피폭량 평가 결과가 전형적인 방법의 피폭량 평가 결과 대비 70 % 낮게 예측되었다. 공간 선량 높은 구역에서 수행되는 특수작업에 대해서도 공정 시뮬레이션을 이용한 피폭량 평가를 수행하였으며, 피폭량이 높은 작업을 쉽게 선별할 수 있었고, 해당 작업의 휴먼 마니킨 자세와 공간 선량 가시화를 통해 직관적으로 작업 개선안을 도출할 수 있었다.

• 대한디지털의료영상학회논문지
• /
• 제13권2호
• /
• pp.59-62
• /
• 2011

In this experiment, how DEXA(Dual-energy X-ray Absorptiometry) bone mineral density was measured using the equipment. In order to maintain the same measurement conditions, bone mineral density measurements of 10 cm thick phantom, with an actual patient at a point when examining the same conditions(100 kVp, 1 mA) and then out to the five doses of radiation and its average was calculated by dividing measured. X-ray dose rate measured at the Research Institute, Sword of the gamma survey meters calibrated MEDCOM Ltd. (Inspector GM counter tube) was used, calibration factor is 1.15. On a horizontal plane around the patient, depending on the distance was significantly reduced dose rate. In addition, orientation $0^{\circ}$ head end was higher in the direction of the highest dose rate, $0^{\circ}$ $180^{\circ}$ direction from the direction towards the higher dose rate reduced to some extent in the direction of all the $120^{\circ}$ were able to identify.