• Journal of Korea Water Resources Association
• /
• v.52 no.2
• /
• pp.107-113
• /
• 2019

The flood forecasting model currently used in Korea calculates the runoff of basin using the lumped rainfall-runoff model and estimates the river level using the river and reservoir routing models. The lumped model assumes homogeneous drainage zones in the basin. Therefore, it can not consider various spatial characteristics in the basin. In addition, the rainfall data used in lumped model also has the same limitation because of using the point scale rainfall data. To overcome the limitations as mentioned above, many researchers have studied to apply the distributed rainfall-runoff model to flood forecasting system. In this study, to apply the Grid-based Rainfall-Runoff Model (GRM) to the Korean flood forecasting system, the optimal resolution is determined by analyzing the difference of the results of the runoff according to the various resolutions. If the grid size is to small, the computation time becomes excessive and it is not suitable for applying to the flood forecasting model. Even if the grid size is too large, it does not fit the purpose of analyzing the spatial distribution by applying the distributed model. As a result of this study, the optimal resolution which satisfies the accuracy of the bsin runoff prediction and the calculation speed suitable for the flood forecasting was proposed. The accuracy of the runoff prediction was analyzed by comparing the Nash-Sutcliffe model efficiency coefficient (NSE). The optimal resolution estimated from this study will be used as basic data for applying the distributed rainfall-runoff model to the flood forecasting system.

• Journal of Environmental Science International
• /
• v.20 no.1
• /
• pp.93-106
• /
• 2011

Physically-based resampling scheme for roughness coefficient of surface runoff considering the spatial landuse distribution was suggested for the purpose of effective operational application of recent grid-based distributed rainfall runoff model. Generally grid scale(mother scale) of hydrologic modeling can be greater than the scale (child scale) of original GIS thematic digital map when the objective basin is wide or topographically simple, so the modeler uses large grid scale. The resampled roughness coefficient was estimated and compared using 3 different schemes of Predominant, Composite and Mosaic approaches and total runoff volume and peak streamflow were computed through distributed rainfall-runoff model. For quantitative assessment of biases between computational simulation and observation, runoff responses for the roughness estimated using the 3 different schemes were evaluated using MAPE(Mean Areal Percentage Error), RMSE(Root-Mean Squared Error), and COE(Coefficient of Efficiency). As a result, in the case of 500m scale Mosaic resampling for the natural and urban basin, the distribution of surface runoff roughness coefficient shows biggest difference from that of original scale but surface runoff simulation shows smallest, especially in peakflow rather than total runoff volume.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.247-247
• /
• 2015

Global Climate Model (GCM) is too coarse to apply at a basin scale. The spatial downcsaling is needed to used to permit the assessment of the hydrological changes of a basin. Furthermore, temporal downscaling is required to obtain hourly precipitation to analyze a small or medium basin because only few or several hours are used to determine the peak flows after it rains. In the current study, the spariotemporal distribution of downscaled hourly precipitation for RCP4.5 and RCP8.5 scenarios over South Korea is presented as well as its implications over hydrologica responses. Mean hourly precipitation significantly increases over the southern part of South Korea, especially during the morning time, and its increase becomes lower at later times of day in the RCP8.5 scenario. However, this increase cannot be propagated to the mainland due to the mountainous areas in the southern part of the country. Furthermore, the hydrological responses employing a distributed rainfall-runoff model show that there is a significant increase in the peak flow for the RCP8.5 scenario with a slight decrease for the RCP4.5 scenario. The current study concludes that the employed temporal downscaling method is suitable for obtaining the hourly precipitation data from daily GCM scenarios. In addition, the rainfall runoff simulation through the downscaled hourly precipitation is useful for investigating variations in the hydrological responses as related to future scenarios.

• Journal of Korea Water Resources Association
• /
• v.37 no.10
• /
• pp.813-822
• /
• 2004

This study quantifies and compares the drought return and duration characteristics by applying the Poisson process as well as based on by analyzing the observed data directly. The drought spatial distributions derived for the Gyunggi province are also compared. The monthly rainfall data are used to construct the SPI as a drought index. Especially, this study focuses on the evaluation of the Poisson process model when applying it to various data lengths such as in the spatial analysis 'of drought. Summarizing the results are as follows. (1) The Poisson process is found to be effective for the quantification of drought, especially when the data length is short. When applying the Poisson process, two neighboring sites are found insensitive to the data length to show similar drought characteristics, so the overall drought pattern becomes smoother than that derived directly from the observed data. (2) When the data length is very different site by site, the spatial analysis of drought based on a model application seems better than that based on the direct data analysis. This study also found more obvious spatial pattern of drought occurrence and duration when applying the Poisson process.

• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.437-448
• /
• 2004

The traditional fixed areal DAD(rainfall Depth-Area-Duration) method, generally quoted in most hydrology texts, is a simple and useful procedure when watersheds are small and storm movement is not an important factor of consideration. However, it is difficult to obtain satisfactory results for the more apparent forms of storm movement such as typhoons, or for large watershed. In the latter case, especially the margin of error for the areal average rainfall increases proportionally to the area of study, causing biased result. To overcome these limitations, this study focuses on the storm-centered DAD analysis(moving area DAD method) developed and programmed by the isohyetal concept to obtain accurate and objective results. By comparing and analyzing the observed rainfall rates through both method, it was proved that the currently Proposed method more accurately reflected the average rainfall rate. In short, through this new method, approximately 130 storm events nationwide from 1969 to 1999 was analyzed and compared with the fixed areal method results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.184-189
• /
• 2004

A soil moisture measuring method for a hillslope of Korean watershed was developed to configure spatial-temporal distribution of soil moisture. Intensive surveying of topography had been performed to make a refined digital elevation model(DEM) and the hydrological interpretation from flow distribution algorithm was incorporated through reverse surveying. Moreover, A long term measurement system was established to maximize representative features of spatial variation of soil moisture and operated from October 19 to 21, 2003. TDR(Time Domain Reflectometry) with a multiplex monitoring system has been operated for accurate measurements. Measurements were performed at the right side hillslope of Buprunsa located at the sulmachun watershed. The data of temporal and spatial soil moisture variation by rainfall event were collected and the variations of soil moisture were well captured.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.339-352
• /
• 2012

Total maximum daily load have been implemented and indicated that nonpoint discharge coeffients in flow duration curve were 0.50 of Normal flow duration ($Q_{185}$) and 0.15 of low flow duration($Q_{275}$). By using SWAT, nonpoint discharge coefficients are studied with the conditions of the instream flow and the rainfall in two study areas. The nonpoint discharge coefficient average of BOD and TP for normal flows duration in 3 years are 0.32~0.36 and 0.28~0.31. For the low flow duration, the nonpoint discharge coefficient avergae of BOD and TP were 0.10~0.12 and 0.10~0.11. These are lower than the coefficients of total maximum load regulation. There are big differences between one of regulation and one of SWAT for the normal flow duration. With the consideration of rainfall condition, the nonpoint discharge coefficient of flood flow duration are influenced on the amount of rainfalls. However, the nonpoint discharge coefficients of normal flow duration and low flow duration are not effected by the rainfall condition. Since the spatial distribution and geomorphological characteristics could be considered with SWAT, the estimation of nonpoint discharge coefficient in watershed model is better method than the use of the recommended number in the regulation.

• Korean Journal of Remote Sensing
• /
• v.25 no.6
• /
• pp.465-474
• /
• 2009

Convective/stratiform radar echo classification schemes by Steiner et al. (1995) and Biggerstaff and Listemaa (2000) are examined on a monsoonal front during the summer monsoon-Changma period, which is organized as a cloud cluster with mesoscale convective complex. Target radar is S-band with wavelength of 10cm, spatial resolution of 1km, elevation angle interval of 0.5-1.0 degree, and minimum elevation angle of 0.19 degree at Jindo over the Korean Peninsula. For verification of rainfall amount retrieved from the echo classification, ground-based rain gauge observations (Automatic Weather Stations) are examined, converting the radar echo grid data to the station values using the inverse distance weighted method. Improvement from the echo classification is evaluated based on the correlation coefficient and the scattered diagram. Additionally, an optimal use method was designed to produce combined rainfalls from the radar echo and Tropical Rainfall Measuring Mission Precipitation Radar (TRMM/PR) data. Optimal values for the radar rain and TRMM/PR rain are inversely weighted according to the error variance statistics for each single station. It is noted how the rainfall distribution during the summer monsoon frontal system is improved from the classification of convective/stratiform echo and the use of the optimal use technique.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.788-791
• /
• 2008

On this study, following works have been carried out : division of Han River Basin into 24 sub basins, use of rainfall data of 151 stations to make spatial distribution of rainfall, selection of control points such as Soyanggang Dam, Chungju Dam, Chungju Release Control Dam, Heongseong Dam, Hwachun Dam, Chuncheon Dam, Uiam Dam, Cheongpyung Dam and Paldang Dam, selection of SSARR (Streamflow Synthesis and Reservoir Regulation) model as a hydrologic model, preparation of input data of SSARR model, sensitivity analysis of parameter using hydrologic data of 2002. The sensitivity analysis showed that soil moisture index versus runoff percent (SMI-ROP), baseflow infiltration index versus baseflow percent (BII-BFP) and surface-subsurface separation (S-SS) parameters are higher sensitive parameters to the simulation result.