• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.280-284
• /
• 2016

For an arc-flash protection system, the selection of arc-flash sensor in implementation is largely dependent on the coverage area and the spatial resolution. Typically, a point sensor is used to accurately measure an arc event within a very narrow region; whereas, a loop or a line sensor can cover several electrical compartment at the same time, but with a poor resolution. In this work, a novel scheme for an arc-flash sensor was developed by making use of the transmission loss of plastic optical fibers (POFs) to cover a broad range with a high spatial resolution. By relating the amplitude ratio of the arc-signals at the ends of the POF with the arc-location, arc events could be located with a resolution of ~5 cm within a spatial range of 10 m, which has not been reported yet.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.30-48
• /
• 2014

Relying on the interaction indices - dominance index, relative strength index and entropy index, this paper analyzes the structural features of urban network in the Seoul metropolitan area with the flows of commuting, business, and freight. Analytical results show that the Seoul metropolitan urban system is vertical, size-dependent, one-way, and the highest city-dominant network rather than horizontal, size-neutral, two-way, complementary one. The network of freight flow is a little bit more symmetrical than the networks of commuting and business. However, the interaction with Seoul is still determinant in all aspects of hierarchical structure, relative strength, and symmetry of flow.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.607-616
• /
• 2012

The need for management of tunnel air quality is imminent considering the rapid increase of number and span of tunnels in Korea. To investigate spatial distribution of $CO_2$ within tunnels, $CO_2$ were measured and model simulations were performed in Namsan 1 tunnel. Results show that $CO_2$ concentrations were 250 ppm to 400 ppm higher in the exit than tunnel entrance. Also, $CO_2$ concentrations were 200 ppm to 300 ppm lower inside no ventilating vehicle than in the tunnel. Both experimental and model simulation results show that spatial distribution and concentration gradient of air pollutant inside tunnel are highly dependent on traffic density.

• Earthquakes and Structures
• /
• v.18 no.4
• /
• pp.437-449
• /
• 2020

It is quite apparent that engineering concerns related to the influence of masonry infills on seismic behavior of reinforced concrete (RC) structures is likely to remain relevant in the long term, as infill walls maintain their functionalities in construction practice. Within this framework, the present paper mainly deals with the issue in terms of modal expansion of effective earthquake forces and the resultant modal responses. An adequate determination of spatial distribution of effective earthquake forces over the height of the building is highly essential for both seismic analysis and design. The possible influence of infill walls is investigated by means of modal analyses of two-, three-, and four-bay RC frames with a number of stories ranging from 3 to 8. Both uniformly and non-uniformly infilled frames are considered in numerical analyses, where infill walls are simulated by adopting the model of equivalent compression strut. Consequently, spatial distribution of effective earthquake forces, modal static base shear force response of frames, modal responses of story shears from external excitation vector and lateral floor displacements are obtained. It is found that, infill walls and their arrangement over the height of the frame structure affect the spatial distribution of modal inertia forces, as well as the considered response quantities. Moreover, the amount of influence varies in stories, but is not very dependent to bay number of frames.

• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.226-236
• /
• 2016

Single-person household is estimated to be about 26.5% of the total household in 2015, which counts as 5060000 in numbers. We opt to acknowledge the various requests of these single residents, and in order to raise their satisfaction, we investigated on how personal taste, psychological interest, and personality attribute affects the user's preference of space organization and furniture in one room housing. Using the qualified psychology program, Enneagram Personality Type Indicator, we surveyed young people under 30 years old (majority of single-person households), regarding space organization and furniture preference. With the help of a specialist, the survey was constructed with appropriate evaluation items (space organization in one room households, bed, sofa, furniture material, etc), and analyzed the relationship between the evaluated items and personality types. Results showed there is a relationship between personality types and spatial structure. First, preference of spatial structure differed for different personality types. Second, the shape and size of furniture was dependent more on the ease of usability and design rather than on the personality types. One thing to consider is that type 1 and 9 accounted for about 50% of the total surveys. This emphasizes that the preferred spatial structure of a dominant specific personality type should not be overlooked.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.35-39
• /
• 2003

In this study, the longevity index was suggested for researches about social and environmental effects to human immorality and criteria for defining longevity area were developed using statistical analysis. Candidates indexes based on researches about the tend of human death ratio were investigated. As a result statistical analysis, ratio of population over 85 yearn old and over 65 years was selected as a longevity index. Statistical analysis on the longevity distribution at each district showed that 'eup' and 'myun' are appropriate spatial unit to study social and geographical characteristics of longevity. The spatial analysis using the $ArcView^{TM}$ with the suggested index shows the time dependent variances of degree of immorality and spatial relationship between degree of immorality and human migration.

• Geomechanics and Engineering
• /
• v.21 no.3
• /
• pp.227-236
• /
• 2020

Non-destructive exploration using elastic waves has been widely used to characterize rock mass properties. Wave propagation in jointed rock masses is significantly governed by the characteristics and orientation of discontinuities. The relationship between spatial heterogeneity (i.e., joint spacing) and wavelength for elastic waves propagating through jointed rock masses have been investigated previously. Discontinuous rock masses can be considered as an equivalent continuum material when the wavelength of the propagating elastic wave exceeds the spatial heterogeneity. However, it is unclear how stress-dependent long-wavelength elastic waves propagate through a repetitive rock-joint system with multiple joints. A preliminary numerical simulation was performed in in this study to investigate long-wavelength elastic wave propagation in regularly jointed rock masses using the three-dimensional distinct element code program. First, experimental studies using the quasi-static resonant column (QSRC) testing device are performed on regularly jointed disc column specimens for three different materials (acetal, aluminum, and gneiss). The P- and S-wave velocities of the specimens are obtained under various normal stress levels. The normal and shear joint stiffness are calculated from the experimental results using an equivalent continuum model and used as input parameters for numerical analysis. The spatial and temporal sizes are carefully selected to guarantee a stable numerical simulation. Based on the calibrated jointed rock model, the numerical and experimental results are compared.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.937-944
• /
• 2022

Electric vehicles (EVs) have been growing to reduce energy consumption and greenhouse gas (GHG) emissions in the transportation sector. The increasing number of EVs requires adequate recharging infrastructure, and at the same time, adopts low- or zero-emission electricity production because the GHG emissions are highly dependent on primary sources of electricity production. Although previous research has studied solar photovoltaic (PV) -integrated EV charging stations, it is challenging to optimize spatial areas between where the charging stations are required and where the renewable energy sources (i.e., solar photovoltaic (PV)) are accessible. Therefore, the primary objective of this research is to support decisions of siting EV charging stations using a spatial data clustering method integrated with Geographic Information System (GIS). This research explores spatial relationships of PV power outputs (i.e., supply) and traffic flow (i.e., demand) and tests a community in the state of Indiana, USA for optimal sitting of EV charging stations. Under the assumption that EV charging stations should be placed where the potential electricity production and traffic flow are high to match supply and demand, this research identified three areas for installing EV charging stations powered by rooftop PV in the study area. The proposed strategies will drive the transition of existing energy infrastructure into decentralized power systems. This research will ultimately contribute to enhancing economic efficiency and environmental sustainability by enabling significant reductions in electricity distribution loss and GHG emissions driven by transportation energy.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.503-517
• /
• 2023

Standard Digital Volume Correlation (DVC) approaches are based on pattern matching between two reconstructed volumes acquired at different stages. Such frameworks are limited by the number of scans (due to acquisition duration), and time-dependent phenomena can generally not be captured. Projection-based Digital Volume Correlation (P-DVC) measures displacement fields from series of 2D radiographs acquired at different angles and loadings, thus resulting in richer temporal sampling (compared to standard DVC). The sought displacement field is decomposed over a basis of separated variables, namely, temporal and spatial modes. This study utilizes an alternative route in which spatial modes are con-structed via scan-wise DVC, and thus only the temporal amplitudes are sought via P-DVC. This meth-od is applied to a glass fiber mat reinforced polymer specimen containing a machined notch, subjected to in-situ cyclic tension, and imaged via X-Ray Computed Tomography. Different temporal interpolations are exploited. It is shown that utilizing only one DVC displacement field (as spatial mode) was sufficient to properly capture the complex kinematics up to specimen failure.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.147-159
• /
• 2014

Public transportation ridership and walkability of urban district can be enhanced through high quality of TOD(Transit Oriented Development) elements. Generally, TOD have been evaluated several physical components such as the diversity of land use pattern, accessibility of public transportation and aspects of urban design around the station area. Especially, Spatial characteristics of TOD planning elements have many potential dependent when considering the characteristics of Rail Station-Influenced Area Development which is performing around subway station. Therefore, researchers should be considering the variation of spatial properties for planning elements according the set of spatial area and their socioeconomic factors. However, existing many cases related TOD does not consider about this point. In this paper, the changes of TOD characteristics were analyzed by different spatial units surrounding subway station in Busan Metropolitan City. Multiple Regression Analysis was performed for an investigation of effective spatial unit of TOD planning elements in this area using subway ridership data. In addition, the application validity of socioeconomic variables was examined through a comparative analysis of regression results with the multiple regression that implied only physical TOD elements. As the result, the variation of spatial properties for TOD planning elements according to the set of spatial unit was found. Furthermore, the specific spatial unit to applicable TOD elements in this area was derived. And the multiple regression model which added socioeconomic variables was derived more improved estimate results than the multiple regression model that implied only physical TOD elements.