• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.323-329
• /
• 2014

Since the terrain of Korea is complex, micro- as well as meso-climate variability is extreme by locations in Korea. In particular, air temperature of agricultural fields is influenced by topographic features of the surroundings making accurate interpolation of regional meteorological data from point-measured data. This study was carried out to compare spatial interpolation methods to estimate air temperature in agricultural fields surrounded by rugged terrains in South Korea. Four spatial interpolation methods including Inverse Distance Weighting (IDW), Spline, Ordinary Kriging (with the temperature lapse rate) and Cokriging were tested to estimate monthly air temperature of unobserved stations. Monthly measured data sets (minimum and maximum air temperature) from 588 automatic weather system(AWS) locations in South Korea were used to generate the gridded air temperature surface. As the result, temperature lapse rate improved accuracy of all of interpolation methods, especially, spline showed the lowest RMSE of spatial interpolation methods in both maximum and minimum air temperature estimation.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.67.4-68
• /
• 2021

In studying the dynamical evolution of galaxy clusters, one intriguing approach is to compare the spatial distributions of various components, such as the dark matter, the member galaxies, the gas, and the intracluster light (ICL; the diffuse light from stars, which are not bound any individual cluster galaxy). If we find a visible component whose spatial distribution coincides with the dark matter distribution, then we could draw a dark matter map without requiring laborious weak lensing analysis. Furthermore, if the component traces the dark matter distribution better for more relaxed galaxy cluster, we could use the similarity as a dynamical stage estimator of the galaxy cluster. We present a novel new methodology to quantify the similarity of two or more 2-dimensional spatial distributions. We apply the method to a sample of galaxy clusters at different dynamical stages simulated within N-cluster Run, which is an N-body simulation using the galaxy replacement technique. Among the various components (stellar particles, galaxies, ICL), the velocity defined ICL+ brightest cluster galaxy (BCG) component traces the dark matter best. Between the sample galaxy clusters, the relaxed clusters show stronger similarity of the spatial distribution between the dark matter and ICL+BCG than the dynamically young clusters.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.29-36
• /
• 2017

In this paper, we implement a spatial big data analysis prototype based on Spark which is an in-memory system and compares the performance by the spatial split algorithm on this basis. In cluster computing environments, big data is divided into blocks of a certain size order to balance the computing load of big data. Existing research showed that in the case of the Hadoop based spatial big data system, the split method by spatial is more effective than the general sequential split method. Hadoop based spatial data system stores raw data as it is in spatial-divided blocks. However, in the proposed Spark-based spatial analysis system, there is a difference that spatial data is converted into a memory data structure and stored in a spatial block for search efficiency. Therefore, in this paper, we propose an in-memory spatial big data prototype and a spatial split block storage method. Also, we compare the performance of existing spatial split algorithms in the proposed prototype. We presented an appropriate spatial split strategy with the Spark based big data system. In the experiment, we compared the query execution time of the spatial split algorithm, and confirmed that the BSP algorithm shows the best performance.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.35-38
• /
• 1987

The purpose of this paper is to compare a class of vector quantization techniques which include GVQ(Genera VQ) MSVQ(Mean separated VQ) and DCT_VQ The VQ techniques are applied to six images and both subjective and objective performance comparison are made The results indicate that the transform domain approach(DCT_VQ) yields more syable results than the spatial domain method (GVQ, MSVQ)

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.557-566
• /
• 2019

The evaluation of the seismic hazard for a given site is to estimate the seismic ground motion at the surface. This is the result of the combination of the action of the seismic source, which generates seismic waves, the propagation of these waves between the source and the site, and site local conditions. The aim of this work is to evaluate the sensitivity of dynamic response of extended structures to spatial variable ground motions (SVGM). All factors of spatial variability of ground motion are considered, especially local site effect. In this paper, a method is presented to simulate spatially varying earthquake ground motions. The scheme for generating spatially varying ground motions is established for spatial locations on the ground surface with varying site conditions. In this proposed method, two steps are necessary. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function. An empirical coherency loss model is used to define spatial variable seismic ground motions at the base rock. In the second step, power spectral density function of ground motion on surface is derived by considering site amplification effect based on the one dimensional seismic wave propagation theory. Several dynamics analysis of a curved viaduct to various cases of spatially varying seismic ground motions are performed. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effect, to spatial ground motions with considering coherency loss, phase delay and local site effects are also calculated. The results showed that the generated seismic signals are strongly conditioned by the local site effect. In the same sense, the dynamic response of the viaduct is very sensitive of the variation of local geological conditions of the site. The effect of neglecting local site effect in dynamic analysis gives rise to a significant underestimation of the seismic demand of the structure.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.96-104
• /
• 2011

Assuming that different spatial types involves the change of observation time to acquire the spatial information, this study intended to analyze the observation time by interior space types and derive the proper time for spatial evaluation. Coming to the study method, in order to analyze the characteristics of observation time in the image evaluation of interior space by types, it looked into the observation time chosen by the testees during evaluation. The findings of this study are as follows: First, the observation time differed by genders and spatial types: men's average time was longest for modern (93.3 sec.) and natural (89.4 sec.) spaces; women's average time was longest for classic space (110.7 sec.), which was the shortest for men. Second, the intensity of observation time zone differed by spatial types: this finding can imply that different design types require different establishment of observation time for evaluation even if the spatial elements are the same. Third, analyzing the distribution of time zones chosen by most testees showed that men's observation time zones were more intensely distributed than those of women. Fourthly, the observation lime for general space could be derived from the gender-based comparison that excluded the difference by types, but considering that different design types lead to different observation time, it could be seen as proper for evaluation of interior space to establish the difference of observation time by spatial types. Finally, Analysis showed the highest preference to the time '(3)'. However, obtaining information presented is the most highly effective time is '(6). Thus, the preferred time zone is different and effective, according to the results of the analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.55-64
• /
• 2004

Conventional bipolar surface electromyography(EMG) technique detects only the superimposed electromyographic activity of a large number of motor units due to its low spatial resolution. For the diagnosis of neuromuscular disorder, the information of single MU is required. In this paper, 9 channel array surface electrode system was as designed and MLoG filter was proposed. Also the MCPT(modified convolution processing technique)method was proposed for the improvement of MUAP resolution. For performance evaluation, power spectrum analysis of random data and raw EMG signal comparison of MUAP shape and quantitative estimation of SNR were executed. As a result, the MUAP resolution improvement of 32％ was obtained from the standpoint of the signal-to-noise ratio(SNR).

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.32-39
• /
• 1999

In this paper, we made CGH patterns that had continuous amplitude distribution binary coded patterns with two different methods, and analyzed those patterns by using LCSLM (liquid crystal spatial light modulator). The error diffusion algorithm and direct quantization method were used as the binarization methods. The parameters of overall average brightness, mean square error, and diffraction efficiency were used in the comparison of reconstruction characteristics. The LCSLM which we used in this experiment was a binary reflective ferroelectric liquid crystal spatial light modulator addressed electrically with 256$\times$256 pixels, 87% fill factor and 15$\mu$m pixel pitch.

• Communications for Statistical Applications and Methods
• /
• v.13 no.3
• /
• pp.669-683
• /
• 2006

Model-based methods are generally used for small area estimation. Recently Shin and Lee (2003) suggested a method which used spatial correlations between areas for data set including some auxiliary variables. However in case of absence of auxiliary variables, Direct estimator is used. Even though direct estimator is unbiased, the large variance of the estimator restricts the use for small area estimation. In this paper, we suggest new estimators which take into account spatial correlation when auxiliary variables are not available. We compared Direct estimator and the newly suggested estimators using MSE, MAE and MB.

• Communications for Statistical Applications and Methods
• /
• v.17 no.4
• /
• pp.493-505
• /
• 2010

Developing a test for independence of random variables X and Y against the alternative has an important role in statistical inference. Kochar and Gupta (1987) proposed a class of tests in view of Block and Basu (1974) model and compared the powers for sample sizes n = 8, 12. In this paper, we evaluate Kochar and Gupta (1987) class of tests for testing independence against quadrant dependence in absolutely continuous bivariate Farlie-Gambel-Morgenstern distribution, via a simulation study for sample sizes n = 6, 8, 10, 12, 16 and 20. Furthermore, we compare the power of the tests with that proposed by G$\ddot{u}$uven and Kotz (2008) based on the asymptotic distribution of the test statistics.