• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.5
• /
• pp.455-461
• /
• 2002

limiting nutrients for phytoplankton were determined by dissored inorganic nitrogen/phosphorous (DIN/DIP) in situ and algal bioassay experiment in the Seomjin River estuary during a study period from March 1999 to October 2001. DIN/DIP ranged from 14.7 to 681.1 during the study period. DIN/DIP was over 16 at the upper and middle estuarine region where salinity was lower than 25 psu and chlorophyll a concentration was high, probably indicating P-limitation in this region while the ratio was less than 16 at the high saline (> 25 psu) region, reflecting the supply of DIP from Gwangyang Bay and thereby indicating N-limitation at the lower estuarine region. These results suggested that the spatial distribution of DIN/DIP in the study region was controlled by the high supply of phosphate from Gwangyang Bay, the low input from Seomjin River and the active uptake by phytoplankton within the estuarine system. The bioassay experiments using Skeletonema costatum, Thalaasiosira rotula and in situ phytoplankton assemblage displayed relatively higher growth of phytoplankton in the P-added culture media, indicating P-limitation. This result was well consistent with the spatial distribution of inorganic nutrients. S. costatum showed a rapid adaptation to the low salinity compared to other phytoplankton species. This phenomenon seemed to account for the strong (> $90\%$ in total cell number) S. costatum bloom in autumn in this estuary. Moreover, although phytoplankton growth rate was higher in the P-added culture media at the end of culture experiment of in situ phytoplankton, the fast growth in the trace metal-added media at the beginning of the experiment suggested a possibility of limitation by other micro-nutrients such as trace metal and vitamin etc.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.3-14
• /
• 2015

This study has extracted observation data by spatial factor for the analysis of subjects' selective attention with the objects of public space at the entrance of subway stations. The methods extracting observation data can be summarized as the following. First, the frequency analysis by lattice was prevalent for those methods, but there is a limitation to the analysis of the observation data. On the contrary, the method extracting observation data by factor applied in this study can make it clear if any sight is concentrated on any particular factors in a space. Second, the results from the extracted data corresponding to the observation area can be objectified while the method setting up the observation area by applying the radius of fovea. Third, time-sequential trace of observation results of relevant factors was possible through hourly analysis of spatial factors. The consideration of the results of "corresponding spatial scope" which is the object of this study will reveal that the more the observation time, the less the degree of attention it receives. Fourth, the frequency of observation superiority was applied for the analysis of the sections with selective attention by time scope; this revealed that men and women had intensive observation in time scope I (52.4 %) and in time scope IV (24.0 %), respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.69-77
• /
• 2005

Most of the evaluations of environmental effect of construction of road do not run parallel with the evaluation of the propriety of the business, but it just reviews how to reduce contamination before the beginning of the construction work. This reveals the limitation of the induction of environment friendly development from the fundamental. In this study, a function of GIS spatial analysis for 9 elements of pre-evaluation of environmental effect has been introduced, and a GIS decision making system for environmental effect of a road has been established for an integrated evaluation by using individual evaluation result. By using GIS decision making system for pre-evaluation of environmental effect that has been developed in this study and the GIS data that has been collected, it would be possible to decrease time and money for evaluation as well as fulfill the requirement of objectivity. Therefore, it would be possible to apply for pre-evaluation of environmental effect when deciding on the route of the road at the beginning stage of the construction work. Also, through the system developed in this study, the construction body could easily induce a mutual agreement with the residents by the visual evaluation material, which might result in an evaluation of environmental effect while decreasing time and money at the beginning stage of the construction.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.223-233
• /
• 2009

Three-dimensional (3-D) optimally-interpolated sea surface temperature (SST) field was produced by using AQUA/AMSR-E satellite data, and its limitations were described by comparing the temporal average of sea surface temperatures. The 3-D OI (Optimum Interpolation) SST showed a small error of less than $0.05^{\circ}C$ in the central North Pacific, but yielded large errors of greater than $0.4^{\circ}C$ at the coastal area where the satellite microwave data were not available. OI SST composite around pixels with no observation due to heavy rainfall or cloudy pixels had estimation errors of $0.1-0.15^{\circ}C$. Comparison with temporal means showed a tendency that overall OI SSTs were underestimated around heavy cloudy pixels and smoothed out by reducing the magnitude of SST fronts. In the low-latitude areas near the equator, OI SST field produced discontinuity, originated from the window size for the OI procedure. This was mainly caused by differences in the spatial scale of oceanic features. Infernal Rossby deformation radius, as a measure of spatial stale, showed dominant latitudinal variations with O(1) difference in the North Pacific. This study suggests that OI SST methodology should consider latitudinally-varying size of window and the characteristics of spatial scales of oceanic phenomena with substantial dependency on latitude and vertical structure of density.

• Atmosphere
• /
• v.17 no.2
• /
• pp.125-133
• /
• 2007

Cloud amount calculation algorithm was developed using MTSAT-1R satellite data. The cloud amount is retrieved at 5 km ${\times}$ 5 km over the Korean Peninsula and adjacent sea area. The algorithm consists of three steps that are cloud detection, cloud type classification, and cloud amount calculation. At the first step, dynamic thresholds method was applied for detecting cloud pixels. For using objective thresholds in the algorithm, sensitivity test was performed for TBB and Albedo variation with temporal and spatial change. Detected cloud cover was classified into 3 cloud types (low-level cloud, cirrus or uncertain cloud, and cumulonimbus type high-level cloud) in second step. Finally, cloud amount was calculated by the integration method of the steradian angle of each cloud pixel over $3^{\circ}$ elevation. Calculated cloud amount was compared with measured cloud amount with eye at surface observatory for the validation. Bias, RMSE, and correlation coefficient were 0.4, 1.8, and 0.8, respectively. Validation results indicated that calculated cloud amount was a little higher than measured cloud amount but correlation was considerably high. Since calculated cloud amount has 5km ${\times}$ 5km resolution over Korean Peninsula and adjacent sea area, the satellite-driven cloud amount could show the possibility which overcomes the temporal and spatial limitation of measured cloud amount with eye at surface observatory.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.92-101
• /
• 2011

This study analyzed the urban structure of Jinju city where urban doughnut phenomena, development of new town at suburban zone and establishment of innovation city appear. The sphere of this study was set limit to Jinju's dong area due to taking the limitation of data. Multivariate analysis was done by using 24 variables to classify into seven clusters(CBD, Industrial Area, Residential Area etc). We studied regional condition and problems at the relation between analyzed regional features of this study and development principles at the upper planning. Jinju city needs urban redevelopment, reconstruction works and redevelopment promotion project for urban outworn zone in view of the regional conditions to innovate outdated city image and restore western Gyeongnam as a central city and also they should promote innovative city that is progressing now and construction of new town that is linked with Sangpyeong industrial complex removal as well as the whole Chojang-dong zone. In conclusion, this study will help to understand regional phenomenon like regional development project and urban management.

• World Technopolis Review
• /
• v.5 no.1
• /
• pp.2-18
• /
• 2016

The development of Technopolis and the establishment of innovative ecosystem have made an important contribution in South Korea's latest industrial development and economic growth. Particularly, Daedeok INNOPOLIS which is responsible for the central role in the national science technology advancement was founded as the Science Town in the 1970s. Since then, it has undergone three-phases of development: Science Park, Technopolis and Innovation cluster. As the result of the transition, Daedeok INNOPOLIS currently serve as the leading role for achieving sustainable economic growth, employment promotion, national and regional innovation. In order to accelerate the progress for success, Daedeok INNOPOLIS have arranged an opportunity for 21st century new industry development, improved growth of technology-intensive SMEs, reinforced academic-industrial cooperation, and established innovative ecosystem. Daedeok INNOPOLIS is considered as an outstanding case of endogenous development strategy of Technopolis. This study attempts to consider the endogenous development strategy of Technopolis in Korea through the analysis of development characteristics of Daedeok INNOPOLIS in two different perspectives: changes of spatial structure and establishment of innovation ecosystem. Daedeok INNOPOLIS have experienced a series of endogenous growth that is consisted of advancement strategy and structural changes, which allowed Daedeok research town to grow into an innovative cluster. A sign of growth of Daedeok INNOPOLIS became apparent when its strategy to reinforce the academic-industry cooperation system by promoting participation from universities helped to overcome a functional limitation as a research institute integrated for the establishment of innovative ecosystem. Since then, the center for creative economy and innovation established in cooperation with large enterprise, has a role to build a startup ecosystem and to promote next level of development such as proactive fostering of venture companies for sustainable technopolis development.

• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.15-24
• /
• 2010

Regional frequency analysis is often used to overcome the limitation of point frequency analysis to estimate probability rainfall depths. However, point frequency analysis is still used in drought analyses. This study proposed a practical method to categorize the homogeneous regions of drought characteristics for the analyses of regional characteristics of droughts in Korea. Using rainfall data from 58 observation stations managed by the Korea Meteorological Administration, this study calculated drought attributes, i.e., mean drought indices for various durations using the Standardized Precipitation Index (SPI) and drought severities expressed by durations, depth, and intensity. The drought attributes provided useful information for categorizing stations into the hydrological homogeneous regions. This study introduced a cluster analysis with K-means techniques to group observation stations. The cluster analysis grouped observation stations into 6 regions in Korea. The data in the hydrological homogeneous region would be used in spatial analysis of drought characteristics and drought regional frequency analysis.