• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.376-386
• /
• 2020

The aim of this study was to develop a new efficient strategy that uses the Vector form Intrinsic Finite-element (VFIFE) method to conduct the static and dynamic analyses of marine pipes. Nonlinear problems, such as large displacement, small strain, and contact and collision, can be analyzed using a unified calculation process in the VFIFE method according to the fundamental theories of point value description, path element, and reverse motion. This method enables analysis without the need to integrate the stiffness matrix of the structure, because only motion equations of particles established according to Newton's second law are required. These characteristics of the VFIFE facilitate the modeling and computation efficiencies in analyzing the nonlinear dynamic problem of flexible pipe with large deflections. In this study, a three-dimensional (3-D) dynamical model based on 3-D beam element was established according to the VFIFE method. The deep-sea flexible pipe was described by a set of spatial mass particles linked by 3-D beam element. The motion and configuration of the pipe are determined by these spatial particles. Based on this model, a simulation procedure to predict the 3-D dynamical behavior of flexible pipe was developed and verified. It was found that the spatial configuration and static internal force of the mining pipe can be obtained by calculating the stationary state of pipe motion. Using this simulation procedure, an analysis was conducted on the static and dynamic behaviors of the flexible mining pipe based on a 1000-m sea trial system. The results of the analysis proved that the VFIFE method can be efficiently applied to the static and dynamic analyses of marine pipes.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.43-50
• /
• 2012

최근 컴퓨터 기술의 발달로 인해 복잡한 형태를 가지는 기념비적인 건축물이 설계, 시공됨에 따라 비정형건축에 관한 사회적인 관심이 해외뿐만 아니라 국내에서도 증가하고 있다. 하지만 비정형 구조시스템의 구현하기 위한 기술 및 연구에 대한 사례가 부족하여 많은 어려움이 있다. 이러한 문제를 해결하기 위해 본 연구에서는 3D모델링 프로그램과 최적설계를 수행하는 프로그램간의 인터페이스 모듈에 대한 연구를 수행하였다. 3D 모델링 프로그램에서 자동 메쉬를 생성하고, 모델링에 대한 정보를 바로 추출하여 최적화를 수행하였다. 결과적으로 개발된 인터페이스 모듈의 검증을 위해 예제 모델을 선정하여 형상최적화을 수행하였다.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.49-56
• /
• 2021

This study aims to develop a form-finding algorithm for a single-layered pneumatic membrane. The initial shape of this pneumatic membrane, which is an air-supported type pneumatic membrane, is to find a state in which a given initial tension and internal pneumatic pressure are in equilibrium. The algorithm developed to satisfy these conditions is that a nonlinear optimization problem based on the force method considering the deformed shape is formulated, and, it's able to find the shape by iteratively repeating the process of obtaining a solution of the governing equations. An computational technique based on the Gauss-Newton method was used as a method for obtaining solutions of nonlinear equations. In order to verify the validity of the proposed form-finding algorithm, a single-curvature pneumatic membrane example and a double-curvature air pneumatic membrane example were adopted, respectively. In the results of these examples, it was possible to well observe the step-by-step convergence process of the shape of the pneumatic membrane, and it was also possible to confirm the change in shape according to the air pressure. In addition, the calculation results of the shape and internal force after deformation due to initial tension, air pressure, and self-weight were obtained.

• 농촌계획
• /
• 제7권2호
• /
• pp.33-40
• /
• 2001

The purpose of this paper is on identifying spatial structure of Palwang and Taechon village and dealing with restoration direction of village spatial structure and village groves. The results are as follows. It was identified that the standing stone for penis form is not standing stone for praying son but complementing that for enforcing enclosed function of enclosing village groves. It was considered that village entrance and entrance road, village grove of Taechon village must be restored for being identified as standing stone of penis form of spatial structure of village. It was considered that the above is essential to connect with ecotourism of Sunchang-gun region. It was identified that Palwang village grove is very good in conservation state, but Taechon village grove has been destructed mostly by various development. It was identified that Palwang village grove is high in species diversity and in scare value as mixed forest, landscape value. The dominent tree of Palwang village was Pinus densiflora and that of Taechon was Salix glandulosa. Salix glandulosa was used pavilion tree, main tree in both village. It was identified that Carpinus tschonoskii is showing the most rapid growth in tree height and Salix glandulosa is showing the most rapid growth in tree breadth diameter of all kind of tree. It was considered that Pinus densiflora was planted first of all and deciduous trees were complemented later. It was considered that simple forest of Pinus densiflora has been changed into mixed forest by artificial affect in the long term. It was considered that Salix glandulosa in Palwang village grove must be indicated as legal protection tree according to present criteria of protection tree selection in Korea. And it is considered desirable that standing stone of penis form and village grove in Palwang village must be indicated unitedly as cultural conservation element.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.129-136
• /
• 2004

The purpose of this study is to provide basic information and guide line for designing hotels located in metropolis by analyzing the spatial configuration of public area. As the sample of analysis, ten hotels are selected in Tokyo area, which were constructed during 1970 to 1990; the period was characterized by booming hotel constructions. The findings of the above analytical survey might be summarized as follows. First of all, it was found that all hotels constructed during the above mentioned periods could be classified into two categories according to their block type such as interlocking form and form within form types. It also observed the six hotels out of then had adopted form within form, beside, the left four hotels were constructed along the interlocking form type. Secondly, as regard to the functional space configuration of the public area, it was found that, in case of eight hotels, the upper part of the building which allocated as residential quarter are configured as linear type. As regard the lower part, however, it was found that different types are adopted. For instance, five hotels had adopted con-course types for the lower level that is spared for the public/service area. Beside, it was also found that, out of above five hotels, three hotels took form within type and the other two adopted compromising type. Thirdly, as regard to the composition of public area, it was found that, the quarters are allocated as follows, such as 34.11 percent for public, 28.99 percent for sales and 33.07 percent for service quarter.

• 건축역사연구
• /
• 제11권1호
• /
• pp.33-48
• /
• 2002

The purpose of this study is to analyze the Daniel Libeskind' spatial concept in view of the Merleau-Ponty's Phenomenology. After the coming of postmodern architecture, the concept of space ceased to be discussed between architects. Instead a sign and a form were supposed as much more important subject to define architectural discipline. But after 1980, the new concept of architectural space was experimented by the architects like Frank Gehry, Peter Eisenman, Steven Hall, and Bernard Tschumi, which was clearly distinguished from modern spatial concept. By the Daniel Libeskind' architecture, this study are to make clear this tendency. For this, we accept as an important instrument Meleau-Ponty's phenomenology and the spatial concept of Minimalism, which stress the relationship of inter-subjectivity between space and human body. Consequently, Daniel Libeskind' spatial concept is characterized by fragmental, accidental, heterogeneous space by accidental events which is occurred by movement of human, which was indentified with Merleau-Ponty's spatial concept.

• 복식
• /
• 제38권
• /
• pp.31-49
• /
• 1998

This study is the primary basic study about the spatial feature of modeling of Fashion Design. Then, this researcher lays significance in establishing the basic system about the character of dress and its ornaments as modeling in spatial-formal, dimension, examining the feature of modeling closely through perception principle and offering the basic principle to plan and organize the modeling space for dress and its ornaments on the basis of it. To generalize the findings is as follows : First, the spatial system of modeling for dress and its ornaments is made with 3 elements such as space, human beings and dress and its ornaments. Second, the form of dress and its ornaments and the spatial organization start from the structural basis which is human body, and the sensible system of body is made through inter-action, but the aesthetic expression is complet-ed by the moment of body. Third, the characteristic principle of model-ing for dress and its ornaments which was suggested in Chapter IV is based on the visuo-per-ceptional modeling experience, and these thinking contents are inputted in cognition course as the invisible in formation in the new space plan and organization and activate the apperception course and aim at the action about aesthetic judgement.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.154-160
• /
• 2005

The present study is concerned with the application of dynamic relaxation method in the investigation of the large deflection behavior of spatial structures. The dynamic relaxation do not require the computation or formulation of any tangent stiffness matrix. The convergence to the solution is achieved by using only vectorial quantities and no stiffness matrix is required in its overall assembled form. In an effort to evaluate the merits of the methods, extensive numerical studies were carried out on a number of selected structural systems. The advantages of using dynamic relaxation methods, in tracing the post-buckling behavior of spatial structures, are demonstrated.

• 한국공간구조학회논문집
• /
• 제19권3호
• /
• pp.61-68
• /
• 2019

A tensegrity module structure is suitable type for spatial structures. Because the tensegrity is composed of set of discontinuous compressive elements (struts) floating within a net of continuous tensile elements (cables), the system can provide the basis for lightweight and strong. However, despite the advantages of tensegrities, design and fabrication of the systems have difficulty because of form-finding methods, pin-connection and the control of prestress. In this paper, the new pin-connection method was invented to make the tensegrity module. The production process and practical implementation of uniformly compressed the tensegrity structures by using a UTM are described. Experiments showed the mechanical response and failure aspects of the tensegrity system.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.125-132
• /
• 2007

본 연구의 주목적은 공간그리드의 조형요소로서 3차원 유닛의 역할과 구성을 탐구하는 것이다. 따라서 공간그리드와 3차원 유닛의 상호관계와 역할, 유닛의 유형 및 구성방식과 이에 영향을 미치는 요인들이 파악된다. 또한 각각의 형태적 특성 및 조합이 공간그리드 전체의 형상에서 드러내는 효과를 확인하여 전반적인 형태구성의 틀을 제시하고자 한다.