• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.434-434
• /
• 2003

This paper proposes a new quantitative and objective image quality metric which is essential to verify the performance of block-based DCT image coding The proposed metric considers not only global distortion of coded image such as spatial frequency sensitivity and channel masking using HVS based multi-channel model, but also structural distortions caused block-based coding. The experimental results show a strong correlation between propose(B metric and subjective metric.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.328-331
• /
• 2007

In this paper, the capacity of the clustered response model for correlated MIMO-OFDM fading channel is investigated. We compare the capacities achieved by correlation at receiver and achieved by correlation at both the transmitter and the receiver for the case where the channel is known and unknown at the transmitter are considered. It is found that the capacity achieved by correlation at receiver is better than the other. It is also shown that the capacity using the water-filling methed is larger than that using the uniform power allocation due to the water-filling gain. But it is negligible when the number of clusters is over the maximum rank of the sum correlation matrix and SNR is high.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.648-656
• /
• 2009

We perform an analysis of the characteristics of the time-reversal pulse in Rayleigh or Ricean fading channel environments. We verify it by using Monte Carlo simulation. In a time-reversal system, each antenna in the time-reversal array receives signals from the transmitter and reverse the received signal in the time axis and then resend it to the original transmitter. We assume that the channel characteristics varies very slowly and the spatial separation between the antennas is not large. Hence the signals received by each antenna are correlated. In this paper, the effect of the correlation on the time-reversed pulse is examined, which includes the spatial properties of the time-reversal pulse such as the focus size, and spatial power distribution.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.420-424
• /
• 2021

The massive MIMO system, which is a core technology of 5G communication systems, has a problem that it is difficult to implement in a frequency division duplex system based on limited channel feedback because a large amount of channel information is required at the transmitting end. In order to solve this problem, the Joint Spatial Division and Multiplexing (JSDM) technique that dramatically reduces the channel information requirement by removing interference between the user groups using channel correlation information that does not change for a long time has been proposed. Recently, a regularized JSDM technique has been proposed to further improve performance by allowing residual interference between the user groups. However, such JSDM-related studies were mainly designed to focus on inter-group interference cancellation, and thus performance analysis was not performed in a more realistic environment assuming limited feedback in the intra-group interference cancellation phase. In this paper, we analyze the performance of the JSDM and regularized JSDM techniques according to the number of groups and users in a limited feedback environment, and through the simulation results, demonstrate that the regularized JSDM technique shows a more remarkable advantage compared to the existing JSDM in a limited feedback environments.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.410-418
• /
• 2012

Parametric stereo(PS) and MPEG surround(MPS) are major spatial audio coding(SAC) tools. In this paper, the problem of the inter-channel correlation(ICC) synthesis in the conventional SAC is analyzed. Conventional methods assume that ambient components mixed to two output channels are anti-phased, while the primary components are assumed to be in-phased. This assumption can cause excessive ambient mixing for a negative-valued ICC. As a remedy to this problem, we propose a new ICC synthesis method based on an assumption that the primary components are anti-phased each other for a negative ICC. The proposed method is also applied to the approximation which works in practice. The performance of the proposed method was evaluated by computer simulations and the subjective listening tests verified that the proposed method is effective in not only headphones but also loudspeakers playback.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.826-835
• /
• 2014

Recently, spatial modulation (SM) schemes are considered to improve the reception performance in spatially correlated channel environments. SM schemes utilize a switching method between multiple transmitters to reduce the correlation among multiple transmitters to reduce the correlation of each received signals and can support transmission additional bits using antenna combinations without extra bandwidth. Therefore, SM schemes can overcome correlation interference of conventional MIMO in urban wireless channels. However, the performance comparisons between SM schemes are not yet performed in correlated urban wireless channels. In this paper, some representative SM schemes are compared and a suitable SM-MIMO system in correlated urban wireless channels is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2256-2262
• /
• 2015

Recently, device-to-device (D2D) communication has been considered as key technology for future cellular system, because it can solve the problem of excessive data traffic increment and can also provide new communication services. Herein, we propose new neighbor discovery for D2D communication and examine its performance. Our proposed scheme is proximity beacon based discovery in which wireless resource for pilot transmission is assigned based on the spatial correlation of wireless channel and sensing period is adjusted according to target accuracy such that power consumption can be reduced. The performance of our propose scheme is analyzed mathematically and verified through computer simulations.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.157-160
• /
• 2004

Spatial Audio Coding 방법 중 하나인 Binaural Cue Coding 방법은 다채널 다객체 오디오 신호를 모노나 스테레오로 다운 믹스한 신호와 spatial 큐를 전송해 디코더에서 복원하는 기술로 작은 비트 율로 다채널 오디오 신호를 전송 복원해 내는 기술이다. 본 논문은 BCC 코딩 방법에서 채널 상관도를 나타내는 ICC 파라메터에 따라 spatial cue 종류를 달리함으로써 전송되는 부가정보의 비트 율을 줄이는 방법을 제안한다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.241-242
• /
• 2006

MPEG Surround is an audio coding technology that represents multi-channel audio signal with downmixed audio signal(s) and very low bitrate side information based on Binaural Cue Coding. The side information consists of Inter-Channel Level Difference, Inter-Channel Correlation, and payloads. These two parameters are correspondent to the well-known spatial parameters in psycho-acoustics, Inter-aural Level Difference (ILD) and Inter-Aural Cross Correlation (IACC). Though ICLD is to provide perceptually equivalent ILD to the listener, however, the ILD of the original multi-channel audio signal and that of the MPEG Surround encoded signal was different. The difference between two ILD values is defined as ILD Distortion (ILDD). This paper provides how ILDD can be applied to enhance sound quality in MPEG Surround and how much ILDD is decreased.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.31-34
• /
• 2000

In this paper, we proposed multispectral image compression method using CIP (classified inter-channel prediction) and SVQ (selective vector quantization) in wavelet domain. First, multispectral image is wavelet transformed and classified into one of three classes considering reflection characteristics of the subband with the lowest resolution. Then, for a reference channel which has the highest correlation with other channels, the variable VQ is performed in the classified intra-channel to remove spatial redundancy. For other channels, the CIP is performed to remove spectral redundancy. Finally, the prediction error is reduced by performing SVQ. Experiments are carried out on a multispectral image. The results show that the proposed method reduce the bit rate at higher reconstructed image quality and improve the compression efficiency compared to conventional method.