• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.93-96
• /
• 2009

Foundation structure for the main engine heavy spare parts in the engine room is susceptible to resonance problem due to outfitting weight. In addition the deck floor has a large opening for the main engine installation and maintenance, which further weakens the foundation structure. To reinforce the weak structure, two types of approaches have been used; 1) insert an H-pillar below or above the floor and 2) increase the stiffener size. In this paper, the H-pillar approach is used to solve the vibration problem of the foundation structure in the engine room opening area. A commercial program is used to analyze the vibration problem ad to find the location and the size of the H-pillar. Modal test at the quay and on-board vibration measurement during the sea trial have confirmed the validity of inserting an H-pillar below the floor.

• Korean Management Science Review
• /
• v.31 no.2
• /
• pp.33-48
• /
• 2014

It is important to maintain on operational availability of aircraft during wartime. The KF-16 fighter, the backbone of the ROKAF (Republic Of Korea Air Force), has a single engine. Therefore, the engine has a critical influence on operational availability. The purpose of this study is to estimate optimal levels of spare part inventories concerning both engines and modules. That is provided by linear programming methods utilizing a developed meta-model. For drawing out the meta-model, we develop a simulation model which can consider wartime demands. In the previous study, $2^k$ factorial design method is used to check the influence of each independent variable. That method requires relatively many scenarios because every extreme value combination of independent variables should be checked. However, this study adopts NOLH (Nearly Orthogonal Latin Hypercube) as an experimental design. By adopting NOLH, this study increases not only efficiency but also accuracy. That is proven by comparing the validity of the developed meta-model on both experimental designs. This study also utilizes the OptQuest simulation tool in ARENA to derive the optimal level of spare stocks. By comparing the result of OptQuest to that of the developed meta-model, the validity of this study is secured.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.35-46
• /
• 2017

Spare engine plays an important role for securing readiness of military strength during unexpected fault occurrences and field/depot planned maintenances. The purpose of this research is to present an approach towards the optimal number of spare engines/modules for diversity of aircraft types. We first reviewed two representative approaches, METRIC and meta model. We then investigated military aircrafts and categorized them into 5 types with regard to the engine type and number of engines/modules per aircraft. Through rigorous investigation of planned/non-planned maintenance of each type, we drew parameters and variables involved. As known, due to the complexity of the problem, it is impossible to develop a simple mathematical model with a closed form solution. Based on the airbase operation and maintenance logic with parameters/variable drawn, we developed a simulation model using ARENA well representing real field exercises. For the optimal solution, we applied OptQuest. It has shown that the program developed generates reliable results through a set of case examples.

• Korean Management Science Review
• /
• v.13 no.3
• /
• pp.163-172
• /
• 1996

According to flying hours, aircraft engines require regular overhaul for preventive maintenance. Because of hostile defense environment of Republic of Korea, the aircraft of republic of Korea Air Force(ROKAF) have been operated at the maximum level of availability and have similar overhaul schedule in several months. The concentration of overhaul schedule in a short period demands additional spare engines far exceeding the spare engines for corrective maintenance. If ROKAF decides to purchase extra engines for the preventive maintenance, the extra engines will be used only for the preventive maintenance and will be excess inventory for the most of aircraft life ccle. Also, the procurement of extra engines is significant investment for ROKAF. To help ROKAF schedule the preventive maintenance without significant spending, this study develops a dynamic programming model that is solvable using an integer programming algorithm. The model provides the number of engines that should be overhauled for a month for multiple periods under given constraints. ROKAF actually used this model to solve a T-59 engine overhaul problem and saved about three billion won at one time. ROKAF plans to use this model continuously for T-59 and other weapon systems. Thus, saving for long term will be significant to ROKAF. Finally, with minor modification, this model can be applied to deciding the minimum number of spare engines for preventive maintenance.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.29-34
• /
• 2009

Recently, we have a lot interest in a sudden rise of oil prices and a change weather for the earth warmming, so, development of new alternative fuels need in order to spare fossil fuel and reduce exhaust emissions for air pollution prevention. Biodiesel, which can be generated from natural renewable sources such as new or used vegetable oils or animal fats, may be used as fuel in diesel engine of compression ignition engine. In this paper, the combustion characteristics between neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were tested using four stroke, direct injection diesel engine, especially this biodiesel was produced from soybean oil at our laboratory. This analysis showed that cylinder pressures, the rate of pressure rises and the rate of heat releases were decreased as the blending ratios of biodiesel to diesel oil increased because of lower heating value of biodiesel in spite of increased oxygen content in biodiesel.

• Korean Management Science Review
• /
• v.30 no.3
• /
• pp.17-31
• /
• 2013

The purpose of this paper is to illustrate the importance of identifying and considering 'purchase dependence' when purchase of an item is dependent on availability of other items demanded in the same order. This paper is the first study to develop an inventory model for purchase-dependent inventory systems. Through simulation experiments, we demonstrate that the developed inventory model incurs less inventory operations cost than other inventory models that ignore purchase dependence. For empirical validation of the developed inventory model, the actual inventory data at the Hyundai Engine Europe Service Center is used. We explain the process of identifying purchase dependencies among items through a data mining technique. The empirical study results in similar results to the simulation experiment, demonstrating that the developed inventory model is applicable to real situations.

• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.333-339
• /
• 2010

It is difficult to determine an optimal inventory level of aircraft engine and modules to achieve the target operational availability since F100-PW-200 & 229 engines of the F-16 & KF-16 aircraft are consisted of 5 modules with different failure rates and costs. This study presents a decision model, combining an integer programming problem and a regression metamodel. Data for the metamodel was attained from results of a simulation model, that represents operational and repair process of F-16 and KF-16. The objective function of an integer programming problem is maximizing the operational availability, representing pessimistic circumstances. Finally, an integer programming problem with a metamodel can make an optimal decision of the inventory level.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.120-125
• /
• 2015

Passengers and Airlines wish neither delay nor cancellation due to aircraft defects. However, about 1 delay or cancellation case occurs out of 100 departures worldwide whereas 1 quarter case does in Korean domestic industry. Independent LCC carriers in Korea have almost double case. Most cases are recovered by replacing aircraft components. Airlines have prepared the spare components based on the reliability data by manufacturers to rectify defects or perform preventive maintenances. The total value for initial spares including engine is 40% of the aircraft price when they operate less than 5 aircraft. The more airlines operate the aircraft, the less the ratio of the investment for spares reflecting the economy of scale. This study intends to suggest how to improve the efficiencies as well as the safety of LCC throughout parts pooling including engines.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.4
• /
• pp.717-737
• /
• 2010

In the face of climate changes and economic crisis, nations across the world spare no efforts to identify new growth engine industries and lift the domestic economy by promoting green technologies and tightening environmental regulations. The Korean government also tries to create and promote new growth engine industries. As part of these efforts, it launched the New Growth Engine Fund in 2009, a private and public initiative to support small- and medium-sized companies that own promising new green technologies. However, it has a limitation on making investment in the fund due to the global economic crisis, the significant size of necessary capital investment and the difficulty of finding investment companies. The lukewarm response of the private sector arose a need to change the fund management method. Against this backdrop, this paper aims to propose efficient strategies of managing various funds such as cooperation fund between the central and local governments, incubator fund financed by the government and financial institutions and win-win cooperation fund for the government, large companies and partners as a means of developing and supporting new growth engine industries in a sustainable way. The importance of this research lies with the proposition of various funds that can be used to implement the government's strategic goal of developing new growth engine industries.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.96-103
• /
• 1998

With the advance of processing technology , so as to spare fuel, piston heads used in automobile reciprocating engine have complex 3-dimension, with respect to shape such as ovality, profile, eccentricity, offset, recess. Therefore, coming out of the existing process work used master cam. the process work is performed using a CNC lathe. For a precision processing, the processing work is need to make study of high speed feed gear synchronized with the rotative speed of main spindle. And then the high speed feeding system must maintain high dynamic stiffness, high speed and high positioning accuracy . In this paper, in order to achieve high speed cutting tool feeding. The linear brushless DC motor is used for satisfying this process work. The ball bush and turicite is used as the guidance of the feed gear system. Also linear encoders, digital servo amplifiers and controller are used for controlling driving motor. This paper presents the design and simulation of the new tool feed system for noncircular machining.