• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1452-1459
• /
• 2010

Application of long-span bridge, which is affected by parameters such as span length, shoe boundary condition, track property and stiffness of superstructure and substructure etc., can vary. Especially, by CWR aspects of the axial force, that can be less constraints of construction depending on whether the application of rail expansion joint(REJ), which has disadvantaged in terms of maintenance. In this study, it was performed parameter study for multiple variables (shaft length, the upper and lower cross-section characteristics, track characteristics, etc.) in terms of CWR aspects. Structure-rail interaction analysis was applied to the typical simple span PSC Box and 3 span continuous bridge Extradosed Bridge(50m+80m+50m) excluding REJ. If you set the boundary e of variables for long-span railway bridge excluding REJ through the this study, when designing future is expected to be able to useful.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.259-266
• /
• 2003

This paper introduces a relation to determine the span ratio between exterior and interior spans, which is strongly required in the preliminary design stage of bridges constructed by Free Cantilever Method (FCM). A relation for the initial tendon force is derived on the basis of an assumption that no vertical deflection occurs at the far end of a cantilever beam due to the balanced condition between the self-weight and the cantilever tendons. In advance, the span ratio can be determined by using an assumption that the negative maximum moment must be the same with the positive maximum moment along the entire spans to be a rational bridge design. Finally, many rigorous lime-dependent analyses are conducted to establish the validity of the introduced relations. The obtained numerical results show that the rational design of FCM bridges may be achieved when the span length ratio of the exterior span to the interior span ranges about 0.75 to 0.8.

• 대한치과교정학회지
• /
• 제48권2호
• /
• pp.107-112
• /
• 2018

Objective: The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. Methods: Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting in a total of six groups. Each stainless steel and fiber-reinforced composite group was comprised of six specimens. The three-point bending flexural test was conducted using a universal testing machine. ANOVA was used to assess differences in the maximum load and maximum stress according to the span length, material, and storage condition. Post-hoc comparisons were performed if necessary. Results: The maximum stress and maximum load were significantly (p < 0.001) associated with the span length, material, and storage condition. The significant interaction between the material and span length (p < 0.001) indicated the differential effects of the material for each span length on the maximum stress and maximum load, with the difference between materials being the highest for the maximum span length. Conclusions: Our findings suggest that fiber-reinforced composite retainers may be an effective alternative for orthodontic retention in patients with esthetic concerns or allergy to conventional stainless steel wires.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.781-787
• /
• 2004

Where the track is continuously welded over a bridge, the longitudinal force is interacted between the track and the sub-structure. Due to this respect, the expansion joint is used to decrease this force. But the expansion joint has several problems related to passenger comfort and maintenance etc. In this study, it is analysed about how the stability of the track is affected as the span length becomes longer in case of 2-span continuos bridge. It is found that there is no problem of an stability unless the span length is longer than 90m when the elastic shoe is used. And several parametric studies were also implemented.

• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.81-86
• /
• 1996

해저 파이프라인은 해저 석유 및 천연가스 생산의 전반에 걸쳐 중요한 역할을 하나, 열악한 해양환경하에 있어 여러 가지 외부 요인에 의해 손상될 가능성이 높으며 그로 인한 피해는 막대하다. 본 논문에서는 해저 파이프라인의 안정성을 위협하는 주된 요인 중의 하나인 동적 자유경간을 해석하였으며, 해저 파이프라인 설계에 있어서 중요한 자유경간의 허용길이를 산출하였다. 자유경간의 허용길이는 와동방출의 진동수와 자유경간의 고유진동수와의 상관관계를 이용하여 산출하였고 경계조건에 따른 허용길이의 변화를 규명하였다. 자유경간 양단의 해저지반은 탄성기초로 간주하였으며, 이를 선형 및 회선 스프링으로 치환하여 경계조건을 일반화하였다. 본 연구를 통하여 여러 가시 지반조건에 대한 동석 자유경간의 정확한 허용길이를 간단하게 얻을 수 있는 무차원화 된 곡선을 구하였으며, 그 결과를 우리나라 동남해역 천연가스전에 설치예정인 해저 파이프라인에 적용하였다.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.78-85
• /
• 1996

The determination of the optimum biarc curve passing through a given set of points along involute curve is studied. The method adopted is that of finding the optimum no. of span and the optimum length of the span such that the error between the biarc curve and involute curve is minimum. Irregular curve span method is effectively used to describe the involute curve with reduced length of NC-Code.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 1998

The precast prestressed concrete girders of I-type section are frequently employed to design the short-to-medium span bridge. However, its beam depth is greatly increased as its span length is increased over than about 30m. Therefore, the economic and aesthetic effectiveness are rapidly decreased in case of the span length over 30m. The purpose of this paper is to verify the structural safety on the new spliced two span bridge and analyze the variation of member forces and stress distribution according to the construction stages and time. The new spliced technique is performed by partial post tensioning and release in the U-type girders. The structural characteristics of this technique is the introduction of secondary moment to reduce the bending moment by self weight of precast U-type girders constructed in simply supported beam type. So, it is expected that the structural efficiency of this spliced bridge may be improved more than other techniques.

• Structural Engineering and Mechanics
• /
• 제37권3호
• /
• pp.309-320
• /
• 2011

As a new type of large-span space structure, suspendome is composited of the upper single-layer reticulated shell and the lower cable-strut system. It has better mechanical properties compared to single-layer reticulated shell, and the overall stiffness of suspendome structure increases greatly due to the prestress of cable. Consequently, it can cross a larger span reasonably, economically and grandly with high rigidity, good stability and simple construction. For a better assessment of the advantages of mechanical characteristic of suspendome quantitatively, the static behavior of Kiewitt6 suspendome was studied by using finite element method, and ADINA was the software application to implement the analysis. By studying a certain suspendome, the internal forces, deformation and support constrained forces of the structure were obtained in this paper. Furthermore, the influences of parameters including prestress, stay bar length, cross-sectional area and rise-to-span ratio were also discussed. The results show that the increase of prestress and vertical stay bar length can improve the stiffness of suspendome; Cross-sectional area has nearly no impact on the static behavior, and the rise-to-span ratio is the most sensitive parameter.

• 대한한의학원전학회지
• /
• 제19권3호
• /
• pp.305-313
• /
• 2006

According to the bone-standard measuring, the length between the elbow and the wrist has the span of 1.25 cheoks whereas it has the span of 1.2 cheoks or 1.2 cheoks today, the breadth of the chest has the span of 9.5 chons whereas it has the span of 8 chons today, and the length from celestial pivot to transverse bone has the span of 6.5 chons whereas it has the span of 5 chons, and the length from free rib region to thigh pivot has the span of 6 chons whereas it has the span of 9 chons today. It is said that all of the acupuncture points are correctly prescribed by the bone-standard measuring irrespective of men and women of all ages, fat and lean, and whether large or small in height. This lies at the root of the selecting acupuncture points. The bone standard in Spiritual Pivot and that in common use at present have a little difference and the bone standard of today is based upon A-B Classic. Spiritual Pivot named as Acupuncture Classic was in good preservation until the mid-eleventh century, but the book lost a lot in contents was the incomplete edition. In the 8th year of the king Cheoljong's reign of the North Song Dynasty in 1093, though the nine-volume Spiritual Pivot drafted from the Goryo Dynasty was published, the book was wanting in consistency. While on the other, I think that A-B Classic which has been in a state of perfection had a great influence on the healers of the day.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.74-80
• /
• 2016

In this paper, structural characteristics for an extradosed prestressed concrete box girder bridge are investigated in terms of selective parameters. These parameters are mainly associated with the structural details of the extradosed bridge and derived from currently available literatures regarding previous design drawings. The analyses have been carried out using general-purpose structural analysis program, RM-Space Frame. The parameters evaluated for the present study represent the most salient features of the extradosed bridge and are as follows; 1) span length ratio(side-span length to center-span length), 2) boundary condition of girder, 3) height of pylon, 4) anchorage location of external cables and 5) girder stiffness. The analytical predictions indicate that span length ratio and pylon height are reasonably adequate in the range of 0.55 to 0.60 and $L_m/8$ to $L_m/12$ respectively for the bridge under consideration. Also, demonstrated is the boundary condition of girder, in which rigid-connection details give more efficiency than the continuous details. In addition, considering structural characteristics of the extradosed bridge, it is desirable that the girder stiffness should be determined by the stress range of external cables rather than bending moment of girder.