• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.117-123
• /
• 2006

The purpose is to study the identification method of Huangjinju powder for injection and the medicinal materials by the fingerprint off-ray Diffraction Fourier (XRDF). We used the same method on both the studying of Huangjinju and the medicinal materials. Then we selected a few components alignment to compare. We analyzed the data by setting up the deviation $d({\AA})$ as ${\pm}0.05$ to calculate the rate of special mark on the sample (Px) and on the patent (P). The special XRDF of Huangjinju$[d({\AA})/(I/I_0)]$ have 5 peaks that have not expressed in medicinal materials. Therefore Px is 22.73%. Flos Trollii Chinensis has 3 special marks and Px is 17.65%. Flos Chrysanthemi Indici has 1 special mark and Px is 3.57%. Its coincided interplanar spacing with the patent is $2.907{\AA}$. Flos Lonicerae Japonicae has 6 special marks and Px is 23.08%. Its special mark in the patent are 4.95/14 and 4.50/15, respectively. The P is 9.09%. Its coincided interplanar spacing with the patent is $2.910{\AA}\;and\;3.05{\AA}$, respectively. The number of special XRDF mark peaks of baicalin is 9 and Px is 18.37%. Its coincided interplanar spacing with the patent is $2.910{\AA}$. It has visible mark and specificity adopting XRDF fingerprint to identify Huangjinju and medicinal materials. Establishing the quality standard is a synthetic index that depends both on special marks in the medicinal materials of the patent and on the coincidence peak data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.512-517
• /
• 1990

This experiment was conducted to evaluate the tillering behavior of low- and high-tillering rice plants, IR58. a high-tillering cultivar with small panicles showed not only higher tiller number but also earlier tillering, faster tillering rate and longer tillering duration than IR25588. a low-tillering cultivar with large panicles, Tillering ability of IR25588 was only 59% that of IR58, Percent effective tillers was higher in IR25588(85%) than in IR58 (67%), Tillering response to wider spacing was higher in a high-tillering cultivar than in a low-tillering cultivar, Grain yield response to closer spacing (close spacing adaptability) was higher in a low-tillering cultivar than in a high-tillering cultivar.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.45-58
• /
• 1992

An elasto-plastic constitutive model for geological materials, which satisfies the flezibility and stability at the same time, can be used in a number of geotechnical problems. Using the spacing ratio of critical state, a flexible model is proposed based on the stability of modified Camflay model. The spacing ratio of critical state can be simply evaluated, and practically used in describing the undrained shearing behavior of clay. The proposed model has precisely predicted the stress paths and stress -strain relationships, compared with the modified Camflay model, with respect to undrained triaxial test results. Besides, the effects of strain rate, creep, and relaxation can also be considered. Using the quasi-state boundary surface, the constitutive relations are well predicted. Therefore, it is found that the assumption of associative flow rule is well posed for undrained behavior of normally consolidated clay.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.231-237
• /
• 1986

Under the different conditions of planting density and nitrogen level with aromatic tobacco, some agronomic characters of tobacco like plant height, leaf size, LAI, yield and price were investigated in view of aroma volatile acid contents, the main compounds contributing to the aroma of oriental leaf tobacco. The closer a spacing interval became, the smaller the growth of plant and the leaf size with increment of yields, until about 22,000 plants per 10 are. But the leaf size became smaller without increment of yield when the planting density became more than 22,000 plants per 10 are. There were definite trends toward increase in leaf size, LAI and yield with increase in nitrogen rate. Correlation coefficient between aroma volatile and plant height, largest leaf length, one leaf area was -0.49, -0.49 and -0.47, respectively, showing significance at 1 % level. But LAI (r=-0.14) and dry weight of unit leaf area(r=0.25) was not observed to be significantly associated with aroma volatile, respectively. The results suggest that closer spacing is desirable for smaller leaves, higher contents of aroma volatile and for increased yield.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.255-264
• /
• 2019

The trapezoidal ribs had been installed in the retaining wall in order to reduce to flood damage in the impingement of mountain rivers. In this study, experiments in open channel with the trapezoidal ribs on sidewall were conducted to evaluate the effect of flow resistance by the trapezoidal shape. The hydraulic flow characteristics according to the flow rates were surveyed where the wall roughness is k-type that dimensionless spacings, ${\lambda}_{nv}$, are 6, 9, and 12. The flow-resistance factors such as roughness and friction coefficients increased generally with increase of the spacing of ribs. In high flow rate the friction coefficient showed the maximum value when ${\lambda}_{nv}$ is 9. Though the trapezoidal ribs has the relatively smaller flow resistance compared to the square ribs, their form drag accounted for mean 62% of the total flow resistance. It was confirmed that the optimal spacing of trapezoidal ribs to maximize the effect of flow resistance as the wall roughness increases are 9 to 12 times of the height of trapezoidal ribs.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.53-61
• /
• 2022

This study evaluated the impacts of subsurface drainage design, i.e., spacing and depth, on agricultural productivity and environmental sustainability in two tile-drained fields (Sites A and E) under a corn-soybean rotation in the Midwestern United States. A calibrated and validated Root Zone Water Quality Model (RZWQM) was used to simulate Nitrate-N (nitrogen) losses to tile drainage and crop yields of 30 tile spacing and depth scenarios over 24 years (1992-2015). Our results presented that the narrower and deeper the tile drains are placed, the greater corn yield and Nitrate-N losses, indicating that the subsurface drainage design may cause a trade-off between agricultural productivity and environmental sustainability. The simulation results also presented that up to about 255.7% and 628.0% increase in Nitrate-N losses in Sites A and E, respectively, far outweigh the rate of increase in corn yield up to about 1.1% and 1.6% from the adjustment of tile spacing and depth. Meanwhile, the crop yield and Nitrate-N losses according to the tile configuration differed depending on the field, and the soybean yield presented inconsistent simulation results, unlike the corn yield, which together demonstrate the heterogeneous characteristic of agro-environmental systems to a subsurface drainage practice. This study demonstrates the applicability of agricultural systems models in exploring agro-environmental responses to subsurface drainage practices, which can help guide the introduction and installation of tile systems into farmlands, e.g., orchards and paddy fields, in our country.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.153-156
• /
• 1999

In this paper, a plate type ozonizer has been designed and manufactured to minimize the size of ozonizer. This ozonizer have following benefits : \circled1 convenience of shift and installation \circled2 maximize space utility. Therefore, ozone generation characteristics have been investigated by varying flow rate, supplied voltage and gap spacing of plate electrodes.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.205-208
• /
• 2000

In this paper, a plate type ozonizer has been designed and manufactured to minimize the size of ozonizer. This ozonizer have following benefits: convenience of shift and installation maximize space utility. Therefore, ozone generation characteristics have been investigated by varying flow rate, supplied power and gap spacing of plate electrodes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.52-58
• /
• 2019

This study numerically analyzed the icing process in a U-shaped pipe exposed to the outside by considering the mushy zone of freezing water. Numerical results showed that the flow was pulled outward due to the U-shaped bend in the freezing section exposed to the outside, which resulted in the ice wave formation on the wall of the bended pipe behind. At the same time, the formation of a corrugated ice layer became apparent due to the venturi effect caused by the ice. The factors affecting the freezing were investigated, including the change of the pipe wall temperature, the water inflow velocity, and the pipe bend spacing. It was found that, as a whole, the thickness of the freezing layer increased as the pipe wall temperature decreased. It was also found that the freezing layer became relatively thin when the inflow rate of water was increased, and that the spacing of the pipe bends did not significantly impact the change in the freezing layer.

• Animal cells and systems
• /
• v.9 no.1
• /
• pp.13-18
• /
• 2005

Cannibalism plays important roles at the levels of both individual and population. To enhance overall rate of successful survival and reproduction, salamander larvae may have evolved to consume both conspecifics and heterospecifics. Consuming conspecifics could result in decreased inclusive fitness possibly by killing relatives. In several salamander species, discrimination of salamander larval siblings from non-siblings and heterospecifics to avoid such a risk has been reported. To determine whether the Korean salamander larvae consume non-siblings more often than siblings and to analyze prey preferences of the salamander larvae in several different experimental conditions, a series of foraging experiments was conducted in the laboratory. We found that 1) large cannibal larvae preyed on small sibling more often than small non-sibling in a mixed group of sibling and non-sibling, 2) cannibal larvae prefered to consume live, weak, and small larvae to dead, healthy, and large larvae, and 3) cannibal larvae consumed heterospecific tadpoles more often than conspecific nonsibling larvae in a mixed group. In addition, the larval density was positively correlated with the occurrence of spacing behavior, one of the agonistic predator behaviors among salamander larvae.