• 전기학회논문지
• /
• 제56권2호
• /
• pp.361-366
• /
• 2007

In the distribution networks, it is necessary to develop small and light voltage and current sensor for compact and digitalized switchgears. For this purpose, some researches have been continuing till now, CT(current transformer) and VT(voltage transformer) are one of that research. But conventional CT and VT have some problems, that is, have big size and saturation characteristics because of used to iron core. In this paper, CS(current sensor) and VS(voltage sensor), have some merits measuring of current and voltage magnitude as a alternated conventional equipment, were studied. So, this paper shows the process CS and VS design method, equivalent circuit and output result, respectively. As a result of this test, proposed CS and VS have linearity for the output, no saturation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1620-1622
• /
• 2003

Recently, as the technology for the development of high voltage power apparatus using SF6 gas has made remarkable progress, it became possible to develop more compact power apparatus adopting single body substation system. In these gas insulated power apparatus, it is impossible to achieve perfect and safe insulation using only SF6 gas, because some solid insulation parts should be installed to support current-carrying conductor parts for electrical and mechanical safety. When spacers were installed in SF6 gas insulation system, they were exposed to severe electrical intensification which could reduce system insulation performance and restrict the rated operating voltage So, it is necessary to clarify the dielectric characteristics of spacers by analytically and experimentally, in order to design and develop more compact and optimum gas insulated systems. In this paper, the field distribution of three-phase spacers were investigated using three dimensional electrostatic field analysis tool adopting BEM method. And the obtained results were compared to the conventional two dimensional computations. According to these three dimensional calculations, it was possible to find out weak points in the spacer more clearly and these results could be applied to design more compact and optimum three phase spacer developments.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1914-1928
• /
• 2022

To improve the heat transfer efficiency of the reactor fuel assembly, it is necessary to accurately calculate the two-phase flow boiling characteristics and the critical heat flux (CHF) in the fuel assembly. In this paper, a Eulerian two-fluid model combined with the extended wall boiling model was used to numerically simulate the 5 × 5 fuel rod bundle with spacer grids (four sets of mixing vane grids and four sets of simple support grids without mixing vanes). We calculated and analyzed 11 experimental conditions under different pressure, inlet temperature, and mass flux. After comparing the CHF and the location of departure from the nucleate boiling obtained by the numerical simulation with the experimental results, we confirmed the reliability of computational fluid dynamic analysis for the prediction of the CHF of the rod bundle and the boiling characteristics of the two-phase flow. Subsequently, we analyzed the influence of the spacer grid and mixing vanes on the void fraction, liquid temperature, and secondary flow distribution. The research in this article provides theoretical support for the design of fuel assemblies.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1386-1395
• /
• 2020

High fidelity nuclear reactor fuel assembly simulation using CFD method is an effective way for the structure design and optimization. The validated models and user practice guidelines play critical roles in achieving reliable results in CFD simulations. In this paper, the international benchmark MATiS-H is studied carefully and the best user practice guideline is achieved for the rod bundles simulation. Then a 5 × 5 rod bundles model in the advanced pressurized water reactor (PWR) is established and the detailed three-dimensional thermal-hydraulic characteristics are investigated. The influence of spacer grids and mixing vanes on the flow and hear transfer in rod bundles is revealed. As the coolant flows through the spacer grids and mixing vanes in the rod bundles, the drastic lateral flow would be induced and the pressure drop increases significantly. In addition, the heat transfer is enhanced remarkably due to the strong mixing effects. The calculation results could provide meaningful guidelines for the design of advanced PWR fuel assembly.

• 환경생물
• /
• 제21권1호
• /
• pp.77-85
• /
• 2003

본 연구는 위장관염을 일으키는 Vibrio fluvialis의 16S-23S rRNA intergenic spacer region을 분석하였다. ISR을 PCR 증폭 후 plasmid vector에 클로닝하여 염기서열을 분석하였다. 그 결과, ISR의 염기서열은 tRNA gene 조성과 크기에 따라 총 6개의 type으로 분류되었다. 각 type은 tRNA gene 조성과 수에 따라 ISR-A, ISR-E, ISR-El, ISR-lA, ISR-EKV, ISR-EKAV로 명명하였으며, ISR-A는 tRN $A^{Ala}$; ISR-lA, tRN $A^{Ile}$-tRN $A^{Ala}$; ISR-EKV, tRN $A^{Glu}$-tRN $A^{Lys}$-tRN $A^{Val}$; ISR-EKAV, tRN $A^{Glu}$-tRN $A^{Lys}$-tRN $A^{Ala}$-tRN $A^{Val}$; ISR-E와 El은 tRN $A^{Glu}$를 갖고 있었다. 이 중 ISR-EKV type은 minor type으로 존재하고 있으며, 여러 Vibrio종의 ISR-EKV type과 비교시 변이성이 높은 부위를 확인하였다. 따라서, 이 ISR-EKV의 염기서열을 여러 Vibrio종에서 V. fluuialis를 검출하기 위한 species-specific primer 제작에 이용하였다. 제작된 primer의 특이성은 여러 Vibrio 의 genomic DNA를 분리하여 PCR 반응으로 확인하였다. 그 결과, 제작된 primer는 V. fluvialis에 종 특이성이 있으며 여러 Vibrio종으로부터 빠른 검출이 가능함을 확인하였다.로부터 빠른 검출이 가능함을 확인하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권7호
• /
• pp.1097-1103
• /
• 2006

The divalent antibody-toxins are expected to have increased binding avidities to target cells because of the two cell-binding domains. However, previous studies showed that the refolding yield of divalent antibody-toxin is very low, and it is assumed that homodimer formation of antibody-toxin is strongly interfered by the repulsion between the two large toxin domains that come close to each other during dimer formation. In this study, B3 antibody was used as a model antibody, and its Fab domain was used to construct three different kinds of Fab divalent molecules, $[B3(Fab)-toxin]_{2}$. The monomer Fab-toxin molecules were made by fusing the Fab domain of monoclonal antibody B3 to PE38, a truncated mutant form of Pseudomonas exotoxin (PE), and a connecting sequence that contained spacer amino acid sequence (G4S)n (n=l, 2, 3) was inserted between Fab and PE38. The prepared divalent molecules were $[Fab-S\;1,\;2,\;3-PE38]_{2}\;(=[Fab-SKPCIST-KAS(G_{4}S)nGGPE-PE38]_{2}\;(n=1,\;2,\;3))$, and they are derivatives of previously studied $[Fab-H2cys-PE38]_{2}\;(=[Fab-SKPCIST-KASGGPE-PE38]_{2})$. In $[Fab-Sl,\;2,\;3-PE38]_{2}$, two Fab-S1, 2, 3-PE38 monomers were covalently linked by the disulfide bond bridge made from cysteine in the -SKPCIST- sequence. The insertion of spacer amino acids after the disulfide bridge resulted in a 12-18 fold higher yield of dimer formation than previously constructed $[Fab-Hlcys-PZ38]_{2}[7]$, 3-4-fold higher than $[Fab-ext-PZ38]_{2}[25]$. These two molecules have less amino acid spacer sequence between the disulfide bridge and PE38 domain. The design of $[Fab-PE38]_{2}$ in this study gave molecules with a higher refolding yield. The results of cytotoxicity assay showed a higher cytotoxic effect of these divalent molecules than that of the monovalent scFv-PE38 molecule.

• 미생물학회지
• /
• 제36권3호
• /
• pp.173-180
• /
• 2000

부산의 가물치 양식장으로부터 분리된 A. veronii bv. sobria 와 A. caviae를 대상으 로 16S-23S rRNA Intergenic Spacer Region을 cloning 하여 염기서dufd을 분석하였다. A. veronii bv. sobria 는 4그룹의 band pattern이 형성되었고 A. caviae는 1그룹만이 존재하였 다. A. veronii bv. sobria 의 4그룹에 대한 band 수는 2~4개까지 다양하게 나타났으며. 479~481 bp (ISR-1), 513~524 bp (ISR-2), 537~539 bp (ISR-3) 의 염기서열을 밝혀냈다. A. caviae는 3개의 band가 형성되었고,470~480bp (ISR-1), 521~525bp (ISR-2),568~602 bp (ISR-4)의 염기서열을 가지고 있었다. 그리고 이들에 대한 tRNA를 분석한 결과 ISR-1은 tRNAIle(GAT), tRNAAla(TGC)를 가지고 있고 ISR-2,3,4는 tRNAGlu(TTC)를 가지고 있었 다. A. caviae는 ISR-4의 151~281 bp에서 A. veronii bv. sobria 가 가지고 있지 않은 보존 적인 염기서열을 가지고 있었다. 그 중 A. vaviae의 178~197 bp 염기서열을 primer로 design하여 PCR을 실시한 결과 A. caviae 균주에서만 종특이적으로 생성되는 450 bp 정도 의 밴들르 얻을수 있었다.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.37-48
• /
• 2019

WKSF (Warp-knitted spacer fabrics) knitted using a double Raschel machine is the three-dimensional knit that has vertically connected separate layers in loop structures. Because of its unique structure, the fabric is light, compressible and breathable. Owing to the high production speed, the use of the fabric is increasing in various areas. The purpose of this study is to establish the design process in the utilization of WKSF program and analyze the difference between WKSF and Neoprene as garment materials.. The study on the design related to WKSF has rarely been carried out because of the complexity of WKSF structure and the difficulties encountered in analyzing the structure and thread. Therefore, checking beforehand the simulation results similar to a final knit using the CAD program for WKSF can only enhance the efficiency of the design for the light knits. The conclusion drawn after designing the light knits using the CAD program and analyzing the pros and cons of WKSF through the various property evaluation techniques is as follows. The tension characteristic analysis results indicated that Neoprene specimen has the elastic transformation and resilience, thus behaving like an elastic product such as rubber. By contrast, in the event that clothing and fashion accessories are designed with WKSF, these products are kept in a boxy style fit so that the fabric can be applied flexibly to a curvy body line. In addition, WKSF is good in forming noticeably around a curvy body, because its resistance shear deformation is lower than that of Neoprene.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.201-206
• /
• 2011

지지격자체는 경수로 핵연료집합체의 특성과 성능에 영향을 주는 가장 중요한 핵심 구조부품 중에 하나이다. 지지격자체 설계시의 우선적으로 고려해야할 사항은 핵연료가 원자로에 장전되어 있는 동안 내내 연료봉이 기계적인 원인에 의해 손상되지 않도록, 즉 연료봉의 기계적 지지건전성이 유지되도록 설계하는 것이다. 연료봉이 유동기인진동에 의해서 진동할 때 연료봉과 연료봉 지지부 사이에서 상대변위 발생을 완화해 줌으로서 연료봉의 프레팅 마모 손상 가능성이 감소될 수 있는 것으로 알려져 있다. 본 연구에서는 이동 가능한 연료봉 지지부로 구성된 새로운 지지격자체 형상을 제안하였고, 제안된 이동 가능 지지부의 연료봉 지지특성을 유한요소해석을 통해 분석하였다.