• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.13-17
• /
• 1998

In recent years H-bridge multievel inverters have been focused on and selected as the power inverter in several high voltage and high power application. This paper proposes an new PWM method for the multievel H-bridge inverter systems. The proposed PWM method is a carrierwave-based space vector PWM method which utilizes the phase voltage redundancies considering both the switch and conduction loss of the devices. We describe the new PWM method in detail and the effectiveness of the new PWM method is verified by the simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.339-346
• /
• 2005

It is complex to realize the reference voltage vector by the space vector PWM method in three-leg two-phase inverter In this paper a new PWM technique for three-leg two-phase inverter fed two-phase induction motor is poroposed assuming that three-leg two-phase inverter is equivalent circuit for 'four-leg two-phase inverter with the connected two windings'. From assumption, six sectors are decreased to four sectors, and simple sinusoidal PWM method instead of SVPWM is applied to three-leg two-phase inverter. Also, the switching pattern to determine the switching periods at each sector is proposed. Practical verification of theoretical predictions is presented to confirm the capabilities of the new techniques.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.466-469
• /
• 2001

In this paper, closed loop V/f control of induction motor has been implemented by the estimated speed. Closed loop V/f control improve the performance of induction motor drive system at low speed compared to open loop V/f control. However, closed loop V/f control need speed sensor. By using the estimated speed, closed loop V/f control is possible without speed sensor. Rotor speed is calculated from the difference between synchronous frequency and slip angular frequency. 3-phase voltage reference is obtained from synchronous frequency. And the PWM technique using space vector PWM is applied in this scheme. In the space vector PWM, effective time of 3-phase voltage reference is used to simplify the calculation of effective voltage time. This scheme is simple to implement and one chip microprocessor was used in experimental system.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.301-304
• /
• 1989

This paper desoribes a method which can make easily the calculations of current and instantaneous output torque by using the representation techniques of Inverter output voltage space vector. And also, a technique for determinations the optical PWM switching patterns which can boost a output voltage and can minimize higher order harmonic components through appropriate movements of output voltage space vector is introduced.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.474-476
• /
• 1999

This paper presents the vector control of induction motor for traction drives. Especially, the PWM mode control method is well described to be selected as the change of speed to meet the wide speed range of the traction motor. Asynchronous space vector PWM mode and synchronous one pulse mode are basically used under the full speed range with the overmodulation PWM mode for the soft transfer between them. The validity of this proposed control scheme is verified with the simulation results.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.119-121
• /
• 2008

This paper is proposed a high Performance speed control of the synchronous reluctance motor through the SV-PWM(Space Vector Pulse Width Modulation) of FAM-PI(Fuzzy Adaptive Mechanism-PI). SV-PWM is controlled using FAM-PI control. SV-PWM can be maximum used maximum do link voltage and is excellent control method due to characteristic to reducing harmonic more than others. Fuzzy control has a advantage which can be robustly controlled. FAM-PI controller is changed fixed gain of PI controller using fuzzy adaptive mechanism(FAM) to match operating condition. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.106-111
• /
• 2002

In this paper, a new three phase RPWM(Random PWM)with fixed switching frequency is proposed. In the proposed RPWM, each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed RPWM, the experimental study was tried. Along with the randomization of PWM pulses, the space vector modulation is also executed in the C167 micro-controller. The experimental results show that the voltage and current harmonics are spread to a wide band area and that the audible acoustic noise is reduced by the proposed RPWM method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.488-493
• /
• 2014

This paper presents a carrier-based pulse-width modulation(PWM) method for reducing the common-mode voltage of a three-level four-leg converter. The idea of the proposed PWM method is intuitive and easy to be implemented in digital signal processor-based converter control systems. On the basis of the analysis of space-vector PWM(SVPWM) and sinusoidal PWM(SPWM) switching patterns, the fourth leg pole voltage of the three-phase converter called "f leg pole voltage" is manipulated to reduce the common-mode voltage. To synthesize f leg pole voltage for the suppression of the common-mode voltage, positive and negative pole voltage references of f leg are calculated. An offset voltage is also deduced to prevent the distortion of a, b, and c phase voltages. The feasibility of the proposed PWM method is verified by simulation and experimental results. The common-mode voltage of the proposed PWM method in peak-to-peak value is 33% in comparison with that of the conventional SVPWM method. The transition number of the common-mode voltage is also reduced to 25%.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.453-459
• /
• 1995

In this paper, a novel dead time compensation method is presented which produces inverter output voltages equal to reference voltages. An experimental result is also presented to demonstrate the validity of the proposed method. It shows that the compensation of the dead time is possible up to a sub-microsecond range. And the reference voltage can be used as a feedback value, which is essential for sensorless vector control and flux estimation. The method is based on space vector PWM strategy and can be carried out automatically by an inverter controller for initial set-up without any extra hardware.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.45-46
• /
• 2015

본 논문에서는 무게중심좌표계에 의한 공간벡터 PWM의 간단한 구현방법을 제안한다. 무게중심좌표계를 사용하면 듀티비를 계산할 때 SIN, COS의 함수계산없이 단순한 사칙연산만을 사용하고 기준벡터가 속한 섹터에 따라 서로 다른 듀티비를 정하는 식을 유도할 필요가 없으며 듀티비가 어떻게 정해지는지에 대한 직관적인 이해를 할 수 있다. 본 논문에서는 무게중심 좌표계에서 공간벡터 PWM의 듀티비를 정하는 원리에 대하여 설명한다.