• Advances in aircraft and spacecraft science
• /
• v.5 no.5
• /
• pp.581-594
• /
• 2018

This paper is the follow-on of a previous paper by the author where it was pointed out that the forthcoming, manned exploration missions to Mars, by means of complex geometry spacecraft, involve the study of phenomena like shock wave-boundary layer interaction and shock wave-shock wave interaction also along the entry path in Mars atmosphere. The present paper focuses the chemical effects both in the shock layer and on the surface of a test body along the Mars orbital entry and compares these effects with those along the Earth orbital re-entry. As well known, the Mars atmosphere is almost made up of Carbon dioxide whose dissociation energy is even lower than that of Oxygen. Therefore, although the Mars entry is less energized than the Earth re-entry, one can expect that the effects of chemistry on aerodynamic quantities, both in the shock layer and on a test body surface, are different from those along the Earth re-entry. The study has been carried out computationally by means of a direct simulation Monte Carlo code, simulating the nose of an aero-space-plane and using, as free stream parameters, those along the Mars entry and Earth re-entry trajectories in the altitude interval 60-90 km. At each altitude, three chemical conditions have been considered: 1) gas non reactive and non-catalytic surface, 2) gas reactive and non-catalytic surface, 3) gas reactive and fully-catalytic surface. The results showed that the number of reactions, both in the flow and on the nose surface, is higher for Earth and, correspondingly, also the effects on the aerodynamic quantities.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.117-123
• /
• 2012

Many nations have been launched their own earth observation satellites due to much interest in space exploration. Because of this, the number of high resolution satellite are increasing day by day. With the development of web environment, general users have easy access to satellite images. The research conducted a basic study about web-based satellite photogrammetry in order to determine three dimensional coordinates easily without having profound knowledge of satellite sensor modeling. Various element technologies were analyzed to decide three dimensional coordinates by using high resolution satellite images in web environment, and case studies were conducted by using IKONOS satellite images. By applying parallel projection model, which is one of sensor modeling methods, epipolar image was created and prototype form of program that can decide three dimensional location in web environment was implemented. Through this, general users could decide three dimensional location easily in web environment and knew that already existed spatial information can be renewed and used in service area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2013

In recent years, high hardness steel is used for most of the material in many areas including aircraft, nuclear power, space exploration and automotive parts. Low CBN tools are widely used in industrial field which can effectively process high hardness steel of HRC 45 or harder. The results of this study demonstrated, when high hardness steel, SCM440 is turned with Low CBN tools coated with TiN and TiAlN coatings respectively, that both the thrust force and cutting force tends to increase with more increase in cutting force than thrust force, as the feed rate increases at constant cutting speed. In addition, the size of the cutting force and thrust force does not change with the increased cutting speed at the same feed rate, but the tool life is reduced if the cutting speed is increased to shorten the machining time. Therefore, it is recommended to limit the cutting speed at 250 m/min maximum or less. Furthermore, comparing the cutting force of the three tools at the same cutting condition, Tin coating tool showed the smallest cutting force and Low CBN was the next, and the TiAlN coating tools showed the largest cutting force.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.90-97
• /
• 2016

As the paradigm which emphasizes nurturing creative elites is introduced, more attention has been paid to children playing and their creativity. This change means that the importance of creativity is emphasized in the education of children, and furthermore, playgrounds which focus on creativity and imagination are needed. Therefore, this study examines the spatial characteristics of playgrounds for children and suggested strategies to improve them. There are five spatial characteristics of a creative playground: aesthetics, being eco-friendly, exploration, challenging and variable. Through the five characteristics, playgrounds were analysed based on ten expressive elements and the results are summarized: Creative playgrounds for children should have an attractive design with sculptural elements which stimulate children to be excited through associable shapes and abstract colors. Second, shelter type structures and a flexible flow design are needed so that children can feel free and be encouraged to explore in diverse ways. Third, as playgrounds for children provide spaces for rest in addition to play, organic facilities and eco-friendly materials for the rest space should to be used. Fourth, as childhood is a period when emotional, cognitive and physical development are achieved, organic geographical features and atypical facilities should be provided so that children can acquire extensive skills and join in physical activities. Finally, creative playgrounds for children should have mobile or variable facilities which consider the characteristics of children who want to do diverse activities and play different games. This study analysed playgrounds for children and suggested strategies to improve them. For successful design and use of creative playgrounds, it is suggested that intensive research on them and consultation with experts should be considered.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.50-55
• /
• 2012

This paper proposes an optima] many-core processor architecture that meets the requirements of low power and high performance for different ultrasonic image resolutions in hand-held ultrasonic devices. To identify the optimal many-core architecture, seven different PE configurations are simulated for processing ultrasonic images in terms of execution performance and energy consumption. Experimental results indicate that the highest energy efficiencies are achieved at PEs=1,024, 64, and 256 for ultrasonic images at $256{\times}256$, $320{\times}240$, and $800{\times}480$ resolutions, respectively. In addition, the maximum area efficiencies are obtained at PEs=256 (for $256{\times}256$ and $800{\times}480$ image resolutions) and 64 (for $320{\times}240$ image resolution).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.455-461
• /
• 2008

Enhanced Distributed Channel Access (EDCA) is a channel access scheme adopted by the IEEE 802.11e draft standard for QoS-enabled wireless local area networks. It classifies traffic into separate Access Categories (ACs) and achieves service differentiation by allowing each AC to have its own values of channel access parameters. This paper proposes a scheme to dynamically adapt the EDCA parameters to traffic environment so that they both maximize the throughput of non real-time traffics and meet the delay and throughput constraints of real-time traffics. For this purpose, we develop a design algorithm for efficient exploration of the EDCA parameter space. Using the algorithm, we derive a Pareto curve fur delay-throughput trade-off in each anticipated traffic environment. The Pareto database can then be used to optimally adjust the parameter according to the traffic environment and administrative policies. Simulation results show that compared with the default parameter configuration, the proposed scheme is better for delay, throughput guarantee and can improve the throughput of non real-time traffics by 12% on average.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.939-955
• /
• 2010

With the progress of IT and mobile positioning technologies, various types of location-based services (LBS) have been proposed and implemented. Finding a shortest path between two nodes is one of the most fundamental tasks in many LBS related applications. So far, there have been many research efforts on the shortest path finding problem. For instance, $A^*$ algorithm estimates neighboring nodes using a heuristic function and selects minimum cost node as the closest one to the destination. Pruning method, which is known to outperform the A* algorithm, improves its routing performance by avoiding unnecessary exploration in the search space. For pruning, shortest paths for all node pairs in a map need to be pre-computed, from which a shortest path container is generated for each edge. The container for an edge consists of all the destination nodes whose shortest path passes through the edge and possibly some unnecessary nodes. These containers are used during routing to prune unnecessary node visits. However, this method shows poor performance as the number of unnecessary nodes included in the container increases. In this paper, we focus on this problem and propose a new border line-based pruning scheme for path routing which can reduce the number of unnecessary node visits significantly. Through extensive experiments on randomly-generated, various complexity of maps, we empirically find out optimal number of border lines for clipping containers and compare its performance with other methods.

• International Journal of High-Rise Buildings
• /
• v.6 no.2
• /
• pp.165-175
• /
• 2017

The importance of designing urban building complexes so that they obtain 'urban' power, rather than become isolated from the surrounding urban context, has been well recognized by both researchers and practitioners. Nevertheless, most current discussions are made from architects' personal experiences and intuition, and lack a quantitative understanding, to which obstacles include an in-depth exploration of the 'urban' power between building complexes and the urban environment. This paper attempts to measure this feature of 'urban', i.e., 'urbanity,' through a new analytical approach derived from the opendata environment. Three measurements that can be easily collected though the Google Maps API and Open Street Map are applied herein to evaluate high or low values of urbanity. Specifically, these are 'metric depth', i.e., the scale of extended public space, 'development density', i.e., density and distribution of point of interests (POIs), and 'type diversity', i.e., diversity of different commercial types. Six cases located in Japan, China and Hong Kong respectively are ranked based on this analytical approach and compared with each other. It shows that Japanese cases, i.e., Osaka Station City and Namba Parks, Osaka, obtained clearly higher values than cases in Shanghai and Hong Kong. On one hand, the insight generated from measuring and explaining 'urban' power would help to assist better implementation of this feature in the design of urban building complexes. On the other hand, this analytical approach can be easily extended to achieve a large-scale measurement and comparison among different urban building complexes, which is also helpful for design practitioners.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.27-37
• /
• 2018

The purpose of this study is figure out secondary education undergraduates' communication patterns and perceptions of use in KAKAOTALK, one of the most frequently used Social Network Service(SNS). The mixed method research was conducted of survey about 86 students and in-depth interview 10 of them. The chief implication of research showed that it has been firstly functioning them to sustain public and private network and to be an universal tool of expression their opinion, idea, themselves, however, they still regard face-to-face communication important. Secondly, they think that KAKAOTALK is a part of their everyday lives and regarded a communication space to freely express themselves and to adjust and manage their image. Thirdly, they psychologically solved their loneliness and were encouraged, moreover, the contents of communication were different according to usd of public or private team chat room. It needs a follow-up study comparatively to analyze other generation's cognitive psychological values in SNS and to suggest digital culture literacy guideline.