• Journal of Information Management
• /
• v.39 no.2
• /
• pp.131-161
• /
• 2008

Recently electronic journal articles prevail throughout researchers because of the development of internet and electronic publishing technology. It is caused by limited collection development budget, lack of physical storage space for printed journals in libraries, and the user convenience of web services. But from the view of ownership, electronic journals can be unfavorable to information users or libraries who cannot have the permanent right to access all the subscribed journals. Actually the libraries only have right to access journals for subscription periods in using electronic journals. So the users and libraries are willing to purchase printed journals in spite of high cost. As an basis for collaborative collection development and sharing preservation of Korean libraries for the foreign journals, the data analysis is carried out for the journals collection in terms of regional distribution, overlapping status, and journal subject. And the considerables are discussed for collaborative strategic collection development, which means the reduction of overlapped subscription and maximization of utilization in a national standpoint.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2002

This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.328-336
• /
• 2016

Purpose: The heat culture areas of greenhouses have been continuously increasing. In the face of international oil price fluctuations, development of energy saving technologies is becoming essential. To save energy, auxiliary heat source and thermal insulation technologies are being developed, but they lack cost-efficiency. The present study was conducted to save energy by developing a conceptually new semi-basement type greenhouse. Methods: A semi-basement type greenhouse, was designed and constructed in the form of a three quarter greenhouse as a basic structure, which is an advantageous structure to inflow sunlight. To evaluate the performance of the developed greenhouse, a similar structured general greenhouse was installed as a control plot, and heating tests were conducted under the same crop growth conditions. Results: Although shadows appeared during the winter in the semi-basement type greenhouse due to the underground drop, the results of crop growth tests indicated that there were no differences in crop growth and development between the semi-basement type greenhouse and the control greenhouse, indicating that the shadows did not affect the crop up to the height of the crop growing point. The amount of fuel used for heating from January to March was almost the same between the two greenhouses for tests. The heating load coefficients of the experimental greenhouses were calculated as $3.1kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the semi-basement type greenhouse and $2.9kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the control greenhouse. Since the value is lower than the double layer PE (polyethylene) film greenhouse value of $3.5kcal/m^2{\cdot}^{\circ}C{\cdot}h$ from a previous study, Tthe semi-basement type greenhouse seemed to have energy saving effects. Conclusions: The semi-basement type greenhouse could be operated with the same fuel consumption as general greenhouses, even though its underground portion resulted in a larger volume, indicating positive effects on energy saving and space utilization. It was identified that the heat losses could be reduced by installing a thermal curtain of multi-layered materials for heat insulation inside the greenhouse for the cultivation of horticultural products by installing thermal curtain of multi-layered materials for heat insulation inside the greenhouse, it was identified that the heat losses could be reduced.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.548-559
• /
• 2019

Purpose: Analysis method of V2I data driven motorway service area usage behavior to cope with manpower survey. Method: Segmentation of traveling state group and boundary using the distribution characteristics of traveling speed data of individual vehicles. Result: As a result of the verification, the use rate of resting places in lunchtime surged, and the boundary between the distribution status of the traffic speed data was clearly or unclear. Conclusion: The effect of the cost reduction is big because it can cope with the use of rest area survey by manpower and there is no limit in the time and space range of investigation. The dynamic utilization rate of each time sequence, such as a service area/drowsiness shelter/simple service area, with a V2I system, can be calculated. Identify illegal parking on highway section. Identify the unexpected situation in the road section. Identify the real-time service area utilization rate and congestion information.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.412-427
• /
• 2002

This paper proposes a restoration scheme based on mobility learning and prediction in the presence of the failure of mobility databases in mobile communication systems. In mobile communication systems, mobility databases must maintain the current location information of users to provide a fast connection for them. However, the failure of mobility databases may cause some location information to be lost. As a result, without an explicit restoration procedure, incoming calls to users may be rejected. Therefore, an explicit restoration scheme against the failure of mobility databases is needed to guarantee continuous service availability to users. Introducing mobility learning and prediction into the restoration process allows systems to locate users after a failure of mobility databases. In failure-free operations, the movement patterns of users are learned by a Neuro-Fuzzy Inference System (NFIS). After a failure, an inference process of the NFIS is initiated and the users' future location is predicted. This is used to locate lost users after a failure. This proposal differs from previous approaches using checkpoint because it does not need a backup process nor additional storage space to store checkpoint information. In addition, simulations show that our proposal can reduce the cost needed to restore the location records of lost users after a failure when compared to the checkpointing scheme

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.161-171
• /
• 2017

Demand for high-grade limestone is increasing, but the production in the domestic mines has been limited due to the lack of systematic development plans and efforts to develop mining technology to improve the recovery ratio, transition to high-cost underground mining due to increasing social awareness of environmental protection, and the smallness of the domestic mining industry, etc. In this study in connection with this issue, an analysis on the recovery change by improvement of mining method was executed. 3D modeling technique was used to construct a 3D model. 3D model includes the geological structure, the limestone ore body and the underground pits and tunnels excavated at the Daepyeong District of Daesung MDI Donghae District. By using the 3D model, measured resources, reserves and ore recovery were evaluated from the results of pilot operation of the room and pillar hybrid mining method, which is a variant of room and pillar mining method. These results were compared with those obtained from the conventional mining method. The ore recovery obtained by hybrid mining method was found to be up to 71.6%, showing about 26%p. increase compared with the case of conventional mining method.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.169-179
• /
• 2013

Well testing in unconventional reservoirs, such as tight or shale gas formations, presents considerable challenges. It is difficult to estimate the reservoir properties in ultra-low permeability formation because of poor inflow prior to stimulation and excessive test duration. Moreover, radial flow may not develop in hydraulically fractured horizontal wells. For these reasons, the cost of test is high and the accuracy is relatively low. Accordingly, industry is turning to an alternate testing method, diagnostic fracture injection test (DFIT), which is conducted prior to the main hydraulic fracture treatments. Nowadays, DFIT are regarded as the most practical way to obtain good estimates of reservoir properties in unconventional reservoirs. Various methods may be used for interpreting DFIT data. This paper gives an explanation of those methods in detail and examines three actual field data. These show how various analysis methods can be applied to consistently interpret fracture closure pressure and time, as well as before and after closure flow regimes and reservoir properties from field data.

• Journal of Korea Multimedia Society
• /
• v.10 no.2
• /
• pp.209-217
• /
• 2007

This paper proposed to a detection scheme of weather information that is a part of CCTV Images Weather Detection System using CCTV images and Temperature, Humidity. The previous Partial Weather Detection System uses how to acquire weather information using images on the Road. In the system the contrast and RGB Values using clear images are gained. This information is distributed a input images to cloud, rain, snow and fog images. That is, this information is compared the snow and the fog images for acquisition more correctness information us ing difference images and binary images. Currently, We use to environment sense system, but we suggest a new Weather Detection Algorithm to detect weather information using CCTV images. Our algorithm is designed simply and systematically to detect and separate special characteristics of images from CCTV images. and using temperature & humidity in formation. This algorithm, there is more complex to implement than how to use DB with high overhead of time and space in the previous system. But our algorithm can be implement with low cost' and can be use the system in real work right away. Also, our algorithm can detect the exact information of weather with adding in formation including temperature, humidity, date, and time. At last, this paper s how the usefulness of our algorithm.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.201-206
• /
• 2001

Objective : The purpose of this study was to assess the complications, duration of admission, cost effectiveness, radiologic stabilization of the anterior cervical bone fusion in the treatment of cervical disc disease with and without plating. Materials and Methods : Fifty-two surgically treated patients for cervical disc disease were reviewed. Group I consisted of consecutive treated patients with iliac auto-bone graft without instrumentation after anterior cervical discectomy. Group II consisted of consecutive treated patients with iliac autologous-bone graft with CASPER cervical plate fixations. Radiologic fusion was decided when loss of end plate boundary between graft bone and vertebral body and immobile, maintenance of the disc space were evident on simple dynamic plain films. The patients were discharged after the stabilization of cervical motion by films was of tained. These groups were analysed multiple variably with Mann-Whitney U-test. Results : Group I consisted of 18 patients, group II consisted of 34 patients. Mean age was $49.0{\pm}8.1years$, mean duration of admission was $17.27{\pm}10.51days$, mean costs for treatment was $1,970,000{\pm}475,000won$. In group I, mean age was 47.7(34-60) years, 16 patients had undergo on one-level operation, 2-patients had undergo on two-level operation, mean duration of admission was $28.7{\pm}10.4days$, mean costs for treatment was $2,194,473{\pm}561,639won$. The periods of stabilization was $6.6{\pm}3.36weeks$ on radiologic study. Mean periods of out patient follow up was 16.8(6-64) weeks after discharge. Mean period of radiologic follow up was 17.3(4-6) weeks after surgical operation. In group II, mean age was 49.7(37-62) years and 18 patients one-level operation, 14- patients had undergo on two-level operation and 2-patients three-level operation. Mean duration of admission was $11.24{\pm}3.29days$, mean costs for treatment was $1,850,823{\pm}389,372won$. The periods of stabilization was $5.88{\pm}7.07weeks$ on radiologic study. Mean period of out patients follow up was 16.7(4-60) weeks after discharge. Mean period of radiologic follow up was 12.4(3-52) weeks after surgical operation. The duration of admission showed statistical significance in Group II but other items showed no significant difference between two groups. Conclusions : The more economic, early life return and effective method of cervical disc disease in our series were evident in patients who had undergone, iliac bone graft and plate fixations after anterior discectomy.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.83-91
• /
• 2015

Purpose - Despite the structural irrationality of multi-level transportation and the oil price rise, the domestic freight transportation market continues to grow, mirroring the rise in e-commerce and resultant increase in courier services and freight volumes. Several studies on courier services have been conducted. However, few studies or statistics have been published regarding regular freight services although they have played a role in the freight service market. The present study identifies the characteristics of regular freight service users to seek competitiveness enhancement measures specific to regular freight services. Research design, data, and methodology - IPA is a comparative analysis of the relative importance of and satisfaction with each attribute simultaneously. This study used IPA because it facilitates the process of analyzing importance and performance, deriving implications and a visual understanding of results. To enhance the competitiveness of regular freight services, this study surveyed its current users regarding the importance of the regular freight service factors. A total of 200 copies of a questionnaire were circulated and 190 copies were returned. In addition to demographics, respondents answered questions about the importance of and satisfaction with services on a 5-point Likert scale. Excluding 3 inappropriate copies, 187 out of 190 copies were analyzed. PASW Statistics 18 was used for statistical analysis. A total of 20 question items were selected for the service factors presented in the questionnaire based on the 1st pilot survey and previous studies. Results - According to the IPA performed to compare the importance of and satisfaction with service factors, both importance and satisfaction are high in the 1st quadrant, which involves the economic advantage of using regular freight services, quick arrival at destinations, weight freight handling, and less time constraints on freight receipt/dispatch. This area requires continuous management. Satisfaction is higher than importance in the 2nd quadrant, which involves the adequacy of freight, cost savings over ordinary courier services, notification on freight arrival, and freight tracking information. This area requires intensive investment and management. Satisfaction is lower than importance in the 3rd quadrant, involving the credit card payment system, courier delivery service, distance to freight handling sites, easy access to freight handling sites, and prompt problem solving. This area requires further intensive management. Both importance and satisfaction are low in the 4th quadrant, involving the availability of collection service, storage space at freight handling sites, kindness of collection/delivery staff, kindness of outlet staff, and easy delivery checks. This area is a set of variables should be excluded from priority control targets. Conclusions - Based on the IPA, service factors that need priority controls because of high importance and low satisfaction include the credit card payment system, delivery service, distance to freight handling sites, easy access to freight handling sites, and prompt problem solving. The findings need to be applied to future marketing strategies for regular freight services and for developing competitiveness enhancement programs.