• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.35-41
• /
• 2013

Inlet part of a printed circuit heat exchanger has been optimized by using three-dimensional Reynolds-Averaged Navier-Stokes analysis and surrogate modeling techniques. Kriging model has been used as the surrogate model. The objective function for the optimization has been defined as a linear combination of uniformity of mass flow rate and the pressure loss with a weighting factor. For the optimization, the angle of the inlet plenum wall, radius of curvature of the inlet plenum wall, and width of the inlet pipes have been selected as design variables. Twenty six design points are obtained by Latin Hypercube Sampling in design space. Through the optimization, considerable improvement in the objective function has been obtained in comparison with the reference design of PCHE.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.9-16
• /
• 2010

The characteristics of flow and heat transfer in a bubbling fluidized bed are investigated by means of computational fluid dynamics (CFD). To simulate two-phase flow for the gas and solid flows, Eulerian-Eulerian approach is applied. Attention is paid for a heat transfer from the wall to fluidized bed by bubbling motion of the flow. From the result, it is confirmed that heat transfer is promoted by chaotic bubbling motion of the flow by enhancement of mixing among solid particles. In particular, the vortical flow motion around gas bubble plays an important role for the mixing and consequent heat transfer. Discussion is made for the time and space averaged Nusselt number which shows peculiar characteristics corresponding to different flow regimes.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.150-160
• /
• 1999

본 논문은 ‘파트 1’에 그 기초를 두었으며, 실제 실험 상황에의 응용예를 들었다. 보편적인 ‘이중-우물 위치 진동기(double-well potential vibrator)'를 외부 공기압 감쇠기를 장치할 수 있도록 수정하였다. 감쇠는 높음 또는 낮음 으로 조정할 수 있도록 하였다. 이 실험계는 주기운동부터 카오스 운동까지 다양한 동적 특성을 보여준다. 힘-위상(Force-Stare Mapping) 방법이 선형상태 및 카오스상태에 응용되었으며, 특히 감쇠의 높고 낮음의 파악에 그 중점을 두었다. 그리고 , 부분발산지수들(Short term averaged Lyapunov exponents)의 합이 또한 감쇠를 파악함과 동시에 높은 감쇠에서 낮은 감쇠로의 변화를 감시할 수 있음을 보였다. 이 두가지 방법들을 비교하였으며 논하였다.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1365-1375
• /
• 2000

Two phase flows have been numerically calculated to analyze plume characteristics and liquid circulation in gas injection through a porous plug. The Eulerian approach has been for formulation of both the continuous and dispersed phases. The turbulence in the liquid phase has been modeled using the standard $textsc{k}$-$\varepsilon$ turbulence model. The interphase friction coefficient has been calculated using correlations available in the literature. The turbulent dispersion of the phase has been modeled by the "dispersion Prand시 number". The predicted mean flows is compared well with the experimental data. The plume region area and the axial velocities are increased with the gas flow rate and with the decrease in the inlet area. The turbulent intensity also shows the same trend. Also, the space-averaged turbulent kinetic energy for various gas flow rates and inlet areas has been obtained. The results are of interest in the design and operation of a wide variety of materials and chemical processing operations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.85-89
• /
• 1998

A switching power stage is a very nonlinear system because it has two or more operation modes in one switching cycle. To model a switching power stage, the state space averaging method has been developed. Though it allows a unified treatment of a large variety of switching power stages, the model it yields is always very nonlinear. So, it is required to linearize the averaged model. But it is well known that a controller for a nonlinear plant designed by the linearization frequently fails in showing satisfactory control performance. Hence it is very natural to try to design a nonlinear controller for a switching power stage. In design of a switching power system, nonlinear control approaches such as adaptive control and fuzzy control have been widely studied so far. In this research, a recently developed control method, time delay control is briefly studied and a design example for a ZVS PWM half bridge converter is given. The performance of the time delay controller is compared to its conventional counterpart, PI controller by computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1757-1759
• /
• 2002

Global simulator for $CF_4$ discharge in transformer coupled plasma (TCP) source is developed and simulations arc performed under various conditions. The developed simulator is based on a set of space averaged fluid equations for electrons, positive ions, neutrals and radicals of $CF_4$ plasma. And the used absorbed power by electrons is calculated by a 2-dimensional heating model[1].

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.89-94
• /
• 1998

Seasonal variation of attenuation coefficient spectra in Japan sea was extracted from underwater radiance/irradiance spectra observed by a moored buoy system developed by National Space Development Agency of Japan (NASDA). The buoy was deployed 9 months from August 31, 1996 to June 1, 1997. Throughout this period, it was collecting downward irradiance and upward radiance spectra under water at the depth of 1.5m and 6.5m everyday. The dairy averaged diffused attenuation coefficient spectra and underwater reflectance spectra were calculated. The results were compared with the absorption spectra of filtered samples obtained by validation cruises, which carried out 5 times during the moored period. Also, the natural fluorescence of chlorophyll a were extracted from the upward radiance spectra observed at 1.5m depth. The seasonal variation of the calculated attenuation coefficient spectra and the natural fluorescence were examined. The result shows a weak blooming of phytoplankton on November and a large blooming on April.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.880-884
• /
• 2014

RT (reverberation time) of outdoor spaces surrounded by multi-storey buildings depends on many designable factors such as the openness, volume and building layouts, etc. This study therefore aims to clarify the influential factors for RT in outdoor spaces surrounded by buildings with complicated topographical conditions. A series of measurements were carried out for 15 outdoor spaces in 6 apartment complexes with different building layouts. An Empirical method considering the openness, averaged ray length and building high is also suggested, to predict RT approximately in the outdoor spaces. The overall results suggest that RT in outdoor spaces of apartment complexes is significantly influenced by source-receiver distance and building layouts.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.1-9
• /
• 2004

As the first step to investigate the nonlinear interactions between turbulence and marine structures inside a viscous NWT, a LES technique was applied to solve the turbulent channel flow for =150. The employed turbulence models included 4 types: the Smagorinsky model, the Dynamic SGS model, the Structure Function model, and the Generalized Normal Stress model. The simulated data in time-series for the LESs were averaged in both time and space, and statistical analyses were performed. The results of the LESs were compared with those of a DNS, developed in the present study and two spectral methods by Yoon et al.(2003) and Kim et a1.(1987). Based on this research, the accuracy of LESs has been found to be still related to the number of grids for fine grid size).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2440-2443
• /
• 2008

This paper presents a three dimensional shape optimization procedure for a low-speed axial flow fan blade with a weighted average surrogate model. Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model are discretized by finite volume approximations. Six variables from airfoil profile and lean are selected as design variables. 3D RANS solver is used to evaluate the objective functions of total pressure efficiency. Surrogate approximation models for optimization have been employed to find the optimal design of fan blade. A search algorithm is used to find the optimal design in the design space from the constructed surrogate models for the objective function. The total pressure efficiency is increased by 0.31% with the weighted average surrogate model.