• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.102-115
• /
• 2014

The stamped earth method is a typical ancient engineering technique which consists of in-filling wooden frame with layers of stamped earth or sand. This method has been universally used to construct earthen walls and buildings, etc. The purpose of this article is to understand the construction method and principles of the stamped earthen wall through analysis of various construction techniques of Pungnaptoseong Fortress(Earthen Fortification in Pungnap-dong). First of all, the ground was leveled and the foundations for the construction of the earthen wall were laid. The underground foundation of the earthen walls was usually constructed by digging into the ground and then in-filling this space with layers of mud clay. Occasionally wooden posts or paving stones which may have been used to reinforce the soft ground were driven in. The method of adding layers of stamped earth at an oblique angle to either side of a central wall is the most characteristic feature of Pungnaptoseong Fortress. Even though the traces of fixing posts, boards, and the hardening of earth - all signatures of the stamped earth technique - have not been identified, evidence of a wooden frame has been found. It has also been observed that this section was constructed by including layers of mud clay and organic remains such as leaves and twigs in order to strengthen the adhesiveness of the structures. The outer part of the central wall was constructed by the anti-slope stamped earth technique to protect central wall. In addition a final layer of paved stones was added to the upper part of the wall. These stone layers and the stone wall were constructed in order to prevent the loss of the earthen wall and to discharge and drain water. Meanwhile, the technique of cementing with fire was used to control damp and remove water in stamped earth. It can not be said at present that the stamped earth method has been confirmed as the typical construction method of Korean ancient earthen walls. If we make a comparative study of the evidence of the stamped earth technique at Pungnaptoseong Fortress with other archeological sites, progress will be made in the investigation of the construction method and principles of stamped earthen wall.

• Journal of the Korean Regional Science Association
• /
• v.35 no.4
• /
• pp.61-73
• /
• 2019

Urban development and densification have led to the Urban Heat Island Effect, in which the temperature of urban space is higher than the surrounding areas, and the intensity is increasing with climate change. In addition, when the city's air temperature rises in summer, low-income, elderly population, and socially vulnerable people who have health problems lack the ability to cope with the elevated heat environment. Therefore, this study aimed to identify the urban heat island area of Seoul through Hotspot analysis, which is a spatial statistics technique, and explored physical environments, demographic and socioeconomic characteristics of urban heat island effect areas using logistic regression models. This study performed urban heat island hotspot analysis using the average air temperatures of the 423 administrative dongs in Seoul. Analysis results identified that the urban heat islands were concentrated in Jung-gu, Jongno-gu, Yongsan-gu, and Yeongdeungpo-gu. Logistic regression analysis results indicated that urban heat island areas of Seoul were affected by residential floor area ratio, commercial facility floor area ratio, overall floor area ratio, impervious surface ratio, and normalized difference vegetation index(NDVI). In addition, as a result of analyzing the vulnerable area of thermal environment considering the demographic and socioeconomic characteristics of the heat island area, urban heat island areas of Seoul were significantly associated with the proportion of low-income elderly living alone. The result of this study provided useful insights for urban thermal environmental design and policy development that could improve the thermal environment for the socially disadvantaged urban population.

• Korean Journal of Social Welfare
• /
• v.68 no.3
• /
• pp.73-103
• /
• 2016

In this study, it investigates the life of normal adolescents who have parents with intellectual disability and their difficulties which suggested social welfare meanings of this study. In order to conduct wide and in-depth analysis on cases by utilizing the characteristics of qualitative case studies, it describes and analyzes the intellectual disability parents' normal children in detail from the viewpoint of an insider through in-depth interviews, various sources and diverse data collecting methods. As for the subject of this study, both parents should be persons with intellectual disability and their child shall be non-disabled and at least a high school student or older. Through the intentional sampling, five late adolescents who were in high school, all males participated in the study. The data collection process had been conducted from January 2014 to May, which is commonly utilized for qualitative case studies, and comparative analysis between cases were practiced for analysis. For credibility of the research results, it obtained severity at each stage by meeting the standard. The analysis results were largely divided into "growth story of non-disabled adolescents" and "life of non-disabled adolescents". Nine upper categories analyzed the common features in each case. The nine categories were "no one tells me to study", "advance while learning the sense of academic achievement", "hide into my own space", "having to grown up early", "different parents but same love", "relatives raised me", "have a friend who accepts me as I am", "being pressed by poverty", and "standing on a knife edge of being hurt and taking heart". Based on the in-depth research on normal teens that have intellectually disabled parents, theoretically speaking, this study expanded the prospect of study on intellectually disabled to their normal, intellectual teenage children. As for practical significance, understanding their parents' intellectual disability, parenting technique training, case management from the community level is suggested. Rregular real condition research of the families, allowance system for economic support et al. is suggested in policy aspect.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1185-1195
• /
• 2014

Domestic and international CERTs are carrying out security monitoring and response services based on security devices for intrusion incident prevention and damage minimization of the organizations. However, the security monitoring and response service has a fatal limitation in that it is unable to detect unknown attacks that are not matched to the predefined signatures. In recent, many approaches have adopted the darknet technique in order to overcome the limitation. Since the darknet means a set of unused IP addresses, no real systems connected to the darknet. Thus, all the incoming traffic to the darknet can be regarded as attack activities. In this paper, we present a collection and analysis method of malicious URLs based on darkent traffic for advanced security monitoring and response service. The proposed method prepared 8,192 darknet space and extracted all of URLs from the darknet traffic, and carried out in-depth analysis for the extracted URLs. The analysis results can contribute to the emergence response of large-scale cyber threats and it is able to improve the performance of the security monitoring and response if we apply the malicious URLs into the security devices, DNS sinkhole service, etc.

• The Korean Journal of Applied Statistics
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2024

In many real-world data, multiple response variables are often dependent on the same set of explanatory variables. In particular, if several response variables are correlated with each other, simultaneous estimation considering the correlation between response variables might be more effective way than individual analysis by each response variable. In this multivariate regression analysis, least distance estimator (LDE) can estimate the regression coefficients simultaneously to minimize the distance between each training data and the estimates in a multidimensional Euclidean space. It provides a robustness for the outliers as well. In this paper, we examine the least distance estimation method in multivariate linear regression analysis, and furthermore, we present the penalized least distance estimator (PLDE) for efficient variable selection. The LDE technique applied with the adaptive group LASSO penalty term (AGLDE) is proposed in this study which can reflect the correlation between response variables in the model and can efficiently select variables according to the importance of explanatory variables. The validity of the proposed method was confirmed through simulations and real data analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.443-453
• /
• 2020

This study using the active vibration control technique attempts to alleviate numerically the airframe vibration of a UH-60A helicopter. The AVCS(Active Vibration Control System) is applied to reduce the 4/rev vibration responses at the specified locations of the UH-60A airframe. The 4/rev hub vibratory loads of the UH-60A rotor is predicted using the nonlinear flexible dynamics analysis code, DYMORE II. Various tools such as NDARC, MSC.NASTRAN, and MATLAB Simulink are used for the AVCS simulation with five CRFGs and seven accelerometers. At a flight speed of 158knots, the predicted 4/rev hub vibratory loads of UH-60A rotor excite the airframe, and then the 4/rev vibration responses at the specified airframe positions such as the pilot seat, rotor-fuselage joint, mid-cabin, and aft-cabin are calculated without and with AVCS. The 4/rev vibration responses at all the locations and directions are reduced by from 25.14 to 96.05% when AVCS is used, as compared to the baseline results without AVCS.

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1171-1180
• /
• 2015

Multidimensional scaling (MDS) is a graphical technique of multivariate analysis to display dissimilarities among individuals into low-dimensional space. We often have two kinds of MDS which are metric MDS and non-metric MDS. Metric MDS can be applied to quantitative data; however, we need additional information about variables because it only shows relationships among individuals. Gower (1992) proposed a method that can represent variable information using trajectories of the pseudo-points for quantitative variables on the metric MDS space. We will call his method a 'replacement method'. However, the trajectory can not be represented even though metric MDS can be applied to binary data when we apply his method to binary data. Therefore, we propose a method to represent information of binary variables using pseudo-points called a 'partition method'. The proposed method partitions pseudo-points, accounting both the rate of zeroes and ones. Our metric MDS using the proposed partition method can show the relationship between individuals and variables for binary data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.159-166
• /
• 2018

In this study, the internal structural design, dynamic characteristics and load analyses of the small scaled rotor blade required for LCH(Light Civil Helicopter) main rotor wind tunnel test were carried out. The test is performed to evaluate the aerodynamic performance and noise characteristics of the LCH main rotor system. Therefore, the Mach-scale technique was appled to design the small scaled blade to simulate the equivalent aerodynamic characteristics as the full scale rotor system. It is necessary to increase the rotor speed to maintain the same blade tip speed as the full scale blade. In addition, the blade weight, section stiffness, and natural frequency were scaled according to the Mach-type scaling factor(${\lambda}$). For the design of skin, spar, torsion box, which are the main components of the blade, carbon and glass fiber composite materials were adopted, and composite materials are prepreg types that can be supplied domestically. The KSec2D program was used to evaluate the section stiffness of the blade. Also, structural loads and dynamic characteristics of the Mach scale blade were investigated through the comprehensive rotorcraft analysis program CAMRADII.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.77-86
• /
• 2000

There have been a few attempts to measure diffuse line emission between 900 $\AA$ and 1200 $\AA$, and only in a limited number of sight lines has it been detected. The main contributions to the equilibrium radiative cooling curve between $10^{4.5}K\;to\;10^6K$ are from the doublet of Ovi ${lambda}{lambda}1032;and;{lambda}{lambda}1038$ in the FUV spectral region. There are several bright airglow lines which could interfere with attempts to observe the OVI lines. The nearest lines HI 1025 $\AA$, OI 1027 $\AA$ have a combined intensity of about $10^{5.5}$ photons/s/$cm^2$/sr. In the present study, the detectability simulation of OVI doublet is performed using a Monte-Carlo technique and chi-square statistics. The analysis results are compared with the previous observations and with the predictions of several interstellar medium models, and are used to limit manufacturing and alignment errors of FIMS optical system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.69-79
• /
• 2008

Prediction of ground condition ahead of tunnel face might be the most important factor to prevent collapse during tunnel excavation. In this study, a non-destructive method to evaluate the phase velocity in model rock mass using wavelet transform of surface wave was proposed aiming at ground condition assessment ahead of tunnel face. Model tests using gypsum as a rocklike material composed of two layers were performed. A Piezoelectric actuator with frequencies ranging from 150 Hz to 5 kHz was selected as a harmonic source. The acceleration history was measured with two accelerometers. Wavelet transform analysis was used to obtain the dispersion curves from the measured data. The experimental results showed that the near-field effects can be neglected if the distance between two receivers is chosen to be three times the wavelength. A simple inversion method using weighted factor based on the normal distribution was proposed. The inversion results showed that the predicted phase velocity agreed reasonably well with the measured one when the wavelength influence factor was 0.2. The depth of propagation of surface wave was from 0.42 to 0.63 times the wavelength. The range of wavelength varying with phase velocity in dispersion curve matched well with that estimated by inversion technique.