• 농촌계획
• /
• 제1권1호
• /
• pp.75-88
• /
• 1995

The purpose of this study is to present the direction for scheme cultural rural village. For this purpose, to begin with, the major elements which can be applied to the theory were extracted by the study on the scheme of rural village, and the process and the outcome for renovation of rural village were presented by design proposal for the rural village in the exhibition space of yoonghari in Chungwon-kun, Chungchengpukdo. The study on the scheme of rural village is focused on the spatial organization, the futilities allocation, and the major contents of the case study are as follow : (1) To investigate the constrains and the opportunities of site development by the analysis and the synthesis of the site condition for the case study, (2) To study on the planning theory which can be applied to the site, (3) To establish the planning directions which can be introduced into the site and to choose the rmn model by the comparison and valuation of them, (4) To set up the Master Plan on the basis of the final model In spite of the fact that the method and the contents have a lot of problems, the significance of this study is to present a possibility to renovate the rural village these days, moreover to grope for the opportunities to propagate it.

• 전자공학회논문지C
• /
• 제34C권3호
• /
• pp.1-10
• /
• 1997

We present an approach to high-level synthesis for a specific target architecture-partitioned bus architecture. In this approach, we have specific goals of minimizing data transfer length and number of buses in addition to common synthesis goals such as minimizing number of control steps and satisfying given resource constraint. Minimizing data transfer length and number of buses can be very important design goals in the era of deep submicron technology in which interconnection delay and area dominate total delay and area of the chip to be designed. in partitioned bus architecture, to get optimal solution satisfying all the goals, partitioning of operation nodes among segments and ordering of segments as well as scheduling and allocation/binding must be considered concurrently. Those additional goals may impose much more complexity on the existing high-level synthesis problem. To cope with this increased complexity and get reasonable results, we have employed two ideas in ur synthesis approach-extension of the target architecture to alleviate bus requirement for data transfer and adoption of genetic algorithm as a principal methodology for design space exploration. Experimental results show that our approach is a promising high-level synthesis mehtodology for partitioned bus architecture.

• ETRI Journal
• /
• 제38권2호
• /
• pp.314-325
• /
• 2016

This paper examines the resource gain that can be obtained from the creation of clusters of nodes in densely populated areas. A single node within each such cluster is designated as a "hotspot"; all other nodes then communicate with a destination node, such as a base station, through such hotspots. We propose a semi-distributed algorithm, referred to as coordinated cognitive tethering (CCT), which clusters all nodes and coordinates hotspots to tether over locally available white spaces. CCT performs the following these steps: (a) groups nodes based on a modified k-means clustering algorithm; (b) assigns white-space spectrum to each cluster based on a distributed graph-coloring approach to maximize spectrum reuse, and (c) allocates physical-layer resources to individual users based on local channel information. Unlike small cells (for example, femtocells and WiFi), this approach does not require any additions to existing infrastructure. In addition to providing parallel service to more users than conventional direct communication in cellular networks, simulation results show that CCT can increase the average battery life of devices by 30%, on average.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.35-47
• /
• 2018

Design of settlement space is a complicated process while reasonable spatial layout bears great significance on the development and resource allocation of a settlement. The study proposes a weighted L-system generation algorithm based on CA (Cellular Automation) model which tags the spatial attributes of cells through changes in their state during the evolution of CA and thus identifies the spatial growth mode of a settlement. The entrance area of the Caidian Botanical and Animal Garden is used a case study for the model. A design method is proposed which starts from the internal logics of spatial generation, explores possibility of spatial rules and realizes the quantitative analysis and dynamic control of the design process. Taking a top-down approach, the design method takes into account the site information, studies the spatial generation mechanism of settlements and further presents a engine for the generation of multiple layout proposals based on different rules. A optimal solution is acquired using GA (Genetic Algorithm) which generates a settlement spatial layout carrying site information and dynamically linked to the surround environment. The study aims to propose a design method to optimize the spatial layout of the complex settlement system based on parametric generation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.4776-4798
• /
• 2015

The location selection of virtual machines in distributed cloud is difficult because of the physical resource distribution, allocation of multi-dimensional resources, and resource unit cost. In this study, we propose a multi-object virtual machine location selection algorithm (MOVMLSA) based on group information, doubly linked list structure and genetic algorithm. On the basis of the collaboration of multi-dimensional resources, a fitness function is designed using fuzzy logic control parameters, which can be used to optimize search space solutions. In the location selection process, an orderly information code based on group and resource information can be generated by adopting the memory mechanism of biological immune systems. This approach, along with the dominant elite strategy, enables the updating of the population. The tournament selection method is used to optimize the operator mechanisms of the single-point crossover and X-point mutation during the population selection. Such a method can be used to obtain an optimal solution for the rapid location selection of virtual machines. Experimental results show that the proposed algorithm is effective in reducing the number of used physical machines and in improving the resource utilization of physical machines. The algorithm improves the utilization degree of multi-dimensional resource synergy and reduces the comprehensive unit cost of resources.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.137-142
• /
• 2006

현대의 산업공정에서 CAD(Computer-Aided Design)는 설계 및 생산에 관련된 다양한 분야에서 빠져서는 안 될 중요한 분야로 자리매김 하였다. 그러나 생산 설계의 복잡도가 증가 할수록, 그와 관련된 다양한 공학 기술들이 필요로 하게 되었다. 이 논문에서는 CAD기반의 그레이팅 설계 자동화 시스템에서 분할을 고려하는 배치에 대하여 다룬다. 그레이팅 설계 디자인에서 생산 비용 절감의 핵심은 분할을 최소로 하는 디자인을 설계하는 것이다. 이를 해결하기 위하여 그레이팅 분할 배치 문제에 유전 알고리즘을 적용하여 근사 해를 탐색한다. 각 제약 조건들에 우선순위를 두어 적합도를 측정하고, 분할 섹션들을 해 집합으로 구성하여 교배와 선택 연산을 수행함으로써 해를 구하고 시뮬레이션을 통해서 제안된 방법의 효율성을 평가한다.

• 한국통신학회논문지
• /
• 제34권1A호
• /
• pp.1-11
• /
• 2009

OFDMA 및 SC-FDMA 시스템에서, 수신기에서 특별한 시공간 처리를 하지 않으면서 다이버시티를 얻기 위해서, 다수 안테나를 이용하여 시간축의 변화를 일으키거나 주파수 선택적 채널을 만들 수 있다. 분산할당 SC-FDMA 시스템에서 시간 변화를 발생하기 위해 위상 회전 기술을 사용하기 위해서는 낮은 채널부호화율을 적용하는 것이 필요하지만, 시간 변화가 적은 채널을 가정할 때 주파수 선택적 특성을 증가시키기 위하여 순환지연 다이버시티를 적용할 때에는 상대적으로 높은 채널부호화율을 적용하여도 무방하다. 이에 반해서 블록호핑 SC-FDMA 시스템에서는 두 개의 다이버시티 기술이 최적의 채널부호화율 측면에서 큰 차이를 가지지 않는다.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.62-71
• /
• 2007

Due to the shortage of elderly care services in urban areas, multi-functional welfare facilities are proven to be very effective for delivering various service needs of elderly in Japan. Introduction of new longterm care policy for elderly in Korea would change many aspects of elderly care service facilities. Especially elderly home care services like adult daycare centers will expand drastically after beginning of elderly longterm care insurance. The purpose of this research is to study and analyze multi-functional welfare facilities in Japan focusing on the types of day service in those facilities. Planning of daycare centers in multi-functional welfare facilities for the elderly can be classified to 8 types. Those types are daycare centers with senior housing, longterm care insurance facilities, senior centers, small multi-function facility, medical facilities, educational facilities, community facilities and general housing projects. Each type has different benefits for the networking of services for the elderly. Design of daycare centers in multi-functional welfare facilities have distinctive features in entrance and user approach, space allocation and circulation planning. The study of daycare centers and multi-function planning should be followed to make better home care environments for the elderly in Korea.

• Journal of Communications and Networks
• /
• 제13권5호
• /
• pp.472-480
• /
• 2011

In this paper, we investigate two new candidate transmission schemes, non-orthogonal frequency reuse (NOFR) and beam-hopping (BH). They operate in different domains (frequency and time/space, respectively), and we want to know which domain shows overall best performance. We propose a novel formulation of the signal-to-interference plus noise ratio (SINR) which allows us to prove the frequency/time duality of these schemes. Further, we propose two novel capacity optimization approaches assuming per-beam SINR constraints in order to use the satellite resources (e.g., power and bandwidth) more efficiently. Moreover, we develop a general methodology to include technological constraints due to realistic implementations, and obtain the main factors that prevent the two technologies dual of each other in practice, and formulate the technological gap between them. The Shannon capacity (upper bound) and current state-of-the-art coding and modulations are analyzed in order to quantify the gap and to evaluate the performance of the two candidate schemes. Simulation results show significant improvements in terms of power gain, spectral efficiency and traffic matching ratio when comparing with conventional systems, which are designed based on uniform bandwidth and power allocation. The results also show that BH system turns out to show a less complex design and performs better than NOFR system specially for non-real time services.

• International Journal of Knowledge Content Development & Technology
• /
• 제11권2호
• /
• pp.23-36
• /
• 2021

Makerspace offers an innovative way for university libraries to render services and achieve its core objectives. However, there is low level of adoption in Nigerian university libraries, hence the need to investigate the personnel's perception towards makerspace as an innovative learning platform. To achieve this, the descriptive research design was used to elicit data with the aid of a structured questionnaire, from the 96 library personnel in John Harris Library, University of Benin. Of the 96 copies of questionnaire distributed, 68 copies were returned and analyzed using descriptive statistics. The results showed that the library personnel were familiar with makerspace even though they still require more information about it. Also, that makerspace gives students the opportunity to acquire ew skill and enhances collaboration among learners. Moreover, the study revealed that budget constraints, high cost and maintenance of equipments, erratic power supply and lack of staff training are some of the perceived challenges to makerspace implementation. Consequently, the study revealed that university libraries should strategize on how to increase allocation of funds, organize makerspace webinar for personnel, ensure stable electricity supply and create a dedicated space for makerspace in the library. In conclusion, makerspace will provide students with the technological exposure and creative abilities required for the future, and as such effective planning should be made for its deployment and sustainability in Nigerian university libraries.