• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권6호
• /
• pp.305-311
• /
• 2004

Charge transport phenomena of polyaniline-DBSA/High Impact Polystyrene (PAM-DBSA/HIPS) blends have been studied through an examination of electrical conduction. HIPS used host polymer in the blends and PANI-DBSA obey a space charge limited conduction mechanism and a ohmic conduction mechanism respectively. However, PANI-DBSA/HIPS blends do not obey any classical conduction mechanism. Analysis of conduction mechanism revealed that the charging current of PANI-DBSA/HIPS blends increased with the increase of PANI-DBSA content. This result migrlt be explained by the reduction in the distance between PANI-DBSA particles enabling the charge carriers to migrate from a chain to a neighboring chain via hopping or micro tunneling. It was also found that the charging current of PANI-DBSA/HIPS blends decreased as the temperature was elevated, which is of typical phenomena in metals. It is speculated that the charge transport in PANI-DBSA particle was somewhat constrained due to strong phonon scattering.

• 터널과지하공간
• /
• 제20권4호
• /
• pp.252-259
• /
• 2010

도심지 터널 즉 터널의 상부 근접한 거리에 보안물건이 존재하는 경우 일반적인 폭약만을 사용해서는 발파진동을 규제치내에서 조절이 불가능하여 폭약공법이 아닌 무진동, 미진동 공법을 사용해야 한다. 하지만 무진동 공법들은 터널굴착공사비가 크게 증가 하게 되며, 또 공사기간도 길어진다. 일반적으로 노천채굴에서는 폭속이 약2,000 m/s 정도인 저폭속폭약이 응용 사용되어 왔으나 터널발파에는 사용되지 않았다. 본 연구에서는 저폭속폭약을 일반 폭약과 공내에서 혼용장약하여 발파작업을 한 결과 일반 폭약으로 발파하는 것보다 진동이 25~30%정도가 감소하였다. 도심지터널 및 보안물건 근접한 터널에서는 진동규제치내에서 미진동으로 시공할 수 있는 저폭속폭약과 일반폭약을 혼용 사용하는 발파 방법을 사용하는 것이 효과적인 것으로 나타났다.

• Journal of Astronomy and Space Sciences
• /
• 제35권3호
• /
• pp.175-183
• /
• 2018

Many recent satellites have mission periods longer than 10 years; thus, satellite-based local space weather monitoring is becoming more important than ever. This article describes the instruments and data applications of the Korea Space wEather Monitor (KSEM), which is a space weather payload of the GeoKompsat-2A (GK-2A) geostationary satellite. The KSEM payload consists of energetic particle detectors, magnetometers, and a satellite charging monitor. KSEM will provide accurate measurements of the energetic particle flux and three-axis magnetic field, which are the most essential elements of space weather events, and use sensors and external data such as GOES and DSCOVR to provide five essential space weather products. The longitude of GK-2A is $128.2^{\circ}E$, while those of the GOES satellite series are $75^{\circ}W$ and $135^{\circ}W$. Multi-satellite measurements of a wide distribution of geostationary equatorial orbits by KSEM/GK-2A and other satellites will enable the development, improvement, and verification of new space weather forecasting models. KSEM employs a service-oriented magnetometer designed by ESA to reduce magnetic noise from the satellite in real time with a very short boom (1 m), which demonstrates that a satellite-based magnetometer can be made simpler and more convenient without losing any performance.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.393-403
• /
• 2020

We design the Green-Naghdi model type III (GN-III) with widespread thermoelasticity for a thermoelectric half space using a memory-dependent derivative rule (MDD). Laplace transformations and state-space techniques are used in order to find the general solution for any set of limit conditions. A basic question of heat shock charging half space and a traction-free surface was added to the formulation in the present situation of a traveling heat source with consistent heating speed and ramp-type heating. The Laplace reverse transformations are numerically recorded. There are called the impacts of several calculations of the figure of the value, heat source spead, MDD parameters, magnetic number and the parameters of the ramping period.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.27-33
• /
• 2014

This study analyzed the electric vehicle recharging station status with recharging time limitation due to long waiting time, and figured out the user status by user interviews. And then this study verified the validity of hypothesis in terms of environmental design perspective and suggested layout of recharging station model. 21 recharging stations in Korea and station operation cases of 7 countries were examined. Except for the USA, the reality of electric vehicle recharging station today is the 1st proving stage focusing on the infrastructure construction of electric vehicle recharging station. It focuses on performance of recharging facility, use efficiency and operation environment of electric vehicle. About the effective waiting time of the user to use it should be studied. The current conditions of recharging station are as follows: Lack of independent recharging space, lack of facility that reduces external effect of recharging space, and lack of lounge for users during the waiting time. These three are essential factors constructing a suggesting model after basic layout, which needs proper measurement on the long recharging time and long waiting time. The essential factors are applied to electric vehicle recharging station layout so that users might use 'digital refresh" i.e. lounge and information contents service during the waiting time which provides convenience of recharging and emotional space with users. Such upgrade recharging station environmental model might resolve the burden of long recharging time which may contribute to the popularization of electric vehicles.

• 기술사
• /
• 제41권2호
• /
• pp.40-44
• /
• 2008

The construction of korea grand canal supplys nation as below:$\Delta$ return to clean and clear river $\Delta$ offer urbanite space for re-charging $\Delta$ offer local resident tourist attractions $\Delta$ alternative for global warming $\Delta$ economic project for development and growth $\Delta$ awake sleeping inland city $\Delta$ strengthen business competitiveness $\Delta$ reduction of logistic cost

• 한국ITS학회 논문지
• /
• 제11권3호
• /
• pp.81-91
• /
• 2012

최근 기후변화에 따른 위기감으로 인해 세계 각국은 화석연료의 자동차를 전기자동차로 대체하기 위한 노력을 기울이고 있다. 정부는 2020년까지 소형차의 10% 이상을 전기자동차 보급 목표로 설정하였고 '주택건설 기준 등에 관한 규정'을 개정하여 전기자동차 충전설비를 공동주택의 부대설비에 포함시키는 등 충전 인프라 구축에도 노력하고 있다. 공동주택에서 전기자동차의 충전 인프라 및 주차 공간 등의 확보는 전기자동차 보급에 있어 핵심이 되지만, 이들에 대한 합리적 용량 산정 등에 필요한 전기자동차의 수요예측 연구는 미미한 상태이다. 이를 위해 본 연구는 수도권의 공동주택 거주자(분양과 임대 구분)를 대상으로, 통계자료의 시계열분석과 선호도 결과를 이용하여 전기자동차 수요를 예측하였다. 그 결과 2020년 공동주택 거주자의 전기자동차 비율은 임대아파트의 경우 6～21%, 분양아파트는 21～39% 수준이며, 이들의 사용을 지원할 최대전력량은 1,000가구 1일 기준으로 임대아파트 4,200kwh, 분양아파트 7,800kwh로 예측되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.268-269
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.335-341
• /
• 2011

In this paper, we proposed an automatic packing mechanism of one station concept for fastener objects where the continuous work is performed in a finite space. The proposed packing mechanism is composed of supporting frame, feeding supply, air shower device, clamping/opening device, batch charging device, sealing/cutting device and supply adjusting device. And, these mechanisms have been modularized through mechanical, dynamical, structural and fluid optimized design using the SMO(SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The packing process is consisted performed in the order of feeding, clamping, bottom sealing, cutting, opening, object charging, closing and the upper sealing. And the time of these cycles were designed to be completed in 15-20 seconds. This packing mechanism will be created as a prototype in the near future. In addition, it will be applied to the production scenes after going through a field test for the validation of performance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.111-117
• /
• 2003

In the design of the split type free displacer Stilting cryocooler the motion of the displacer is very important to decide the cooling capacity, which depends upon the working gas pressure, the swept volume in the compression space and the expansion space, operating frequency, the phase shift between piston and displacer, etc. In this study, Stirling cryocooler actuated by the electric farce of the dual linear motor is designed and manufactured. Cool down characteristics of the cold end with laser displacement sensor in the expander of the Stilting cryocooler is evaluated. The charging pressure was 15kg$_{f}$/$\textrm{cm}^2$ and operating frequency was 50Hz. Input power and the lowest temperature were about 32W and 67K, respectively. And, displacement of the piston is measured by LVDTs (Linear Variable Differential Transformers), displacement of thedisplacer is measured by laser optic method, and phase shift between piston and displacer is discussed. As the peak-to-peak pressure of the compressor was increased, peak-to-peak displacement of the displacer was increased. The peak-to-peak displacement of the displacer increases in the range of 0 - 64.5Hz(resonant frequency of the displacer), but decreases steeply when the operating frequency is bigger than the resonant frequency. Finally when the phase shift between displacements of the Piston and displacer is 45。, operating frequency is optimum and is decided by resonant frequency of the expander, mass and cross section area of the displacer and constant by friction and flow resistance.e.