• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1252-1257
• /
• 2013

This study was used homomixer as one of the manufacturing method to establish optimal manufacturing condition with magnesium chloride emulsion as coagulant. The more rotational speed of homomixer was fast, the more particle size of magnesium chloride emulsion was minute. The particle size was distributed between 1 and $5{\mu}m$. The more minute particle size of emulsion had an effect on increasing viscosity of emulsion and delay of oil phase separation during storage period, so the quality of magnesium chloride emulsion had correlation with dispersed phase particle size. After all the experiments, when manufacturing magnesium chloride emulsion, it used more than 10,000 rpm of rotational speed of homomixer, it showed the best result as coagulant according to the state of texture and the water separation ratio of soybean curd.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.965-969
• /
• 1996

An investigation was carried out to elucidate the effects of type of ginseng, concentration of ginseng, and type of coagulants on the physical and sensory properties of soybean curd. The textural properties of soybean curd were not influenced by the type of ginseng. Soybean curd coagulated with glucono-delta-lactone (GDL) showed a greater hardness than that coagulated with other coagulants, whereas the former produced a lesser springiness than the latter. The L-value was proportionally reduced by the increase of ginseng level and soybean curd coagulated with $CaCl_2$ showed the lowest L value. All the curd products prepared with ginseng had a pale yellow color. In the sensory properties, springiness and beany taste of soybean curd linearly decreased as the concentration of ginseng was increased. The concentration of ginseng to improve the acceptability of ginseng soybean curd as determined by the physical and sensory evaluation, was less than 0.25%. The most acceptable ginseng soybean curd was the one coagulated with $MgCl_2$. Soybean curd prepared with GDL had the lowest acceptability because of its sour taste and textural properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.1078-1083
• /
• 2002

Effects of chitosan-soybean curd (prepared using chitosan as a coagulant), commercial soybean curd and chitosan powder on serum lipid metabolism were investigated with rats fed high-fat diet for 6 weeks. Food intake of experimental groups fed high-fat (HF), chitosan-soybean curd (CSC), soybean curd (SC), or chitosan powder (CP)diet was lower compared to t]tat of normal group. Body weight gain was lower in rats fed the CSC, SC and CP diets than in rats fed the HF diet. There was no significant difference in total cholesterol concentration among all groups, but HDL-cholesterol concentration was higher and LDL-cholesterol concentration was lower in rats fed the CSC, SC, CP diets than in rats fed the HF diet. Total lipid level was lower in rats fed the SC and CP diets than in rats fed the HF diet. Increment of triglyceride level and decrement of phospholipid level in rats fed the HF diet were recovered significantly by the CSC, SC and Cf diet. Our results indicate that chitosan-soybean curd prepared under the commercial processing condition may provide the beneficial effect on lipid metabolism even though its effect didn't show any significant difference compared to that of commercial soybean curd under the present experimental conditions.

• Korean journal of food and cookery science
• /
• v.10 no.3
• /
• pp.284-290
• /
• 1994

To prepare soybean curds, the concentration of $CaCl_2,\;MgCl_2,\;CaSO_4$ and glucono-%{\delta}$-lactone fresh solution as coagulants were determined by transmittance of whey using spectrophotometer. The concentrations of four coagulants at which the transmittance had the highest value were chosen. Moisture content, yield and protein recovery of soybean curds prepared with four coagulants were investigated. The textural properties were examined by Instron Universal Testing Machine, and sensory evaluation was carried out. The microstructure of soybean curds was examined by SEM. Soybean curds obtained with $CaCl_2\;and\;MgCl_2$ were hard and coarse, and had roasted nutty taste, whereas those with $CaSO_4$ and GDL revealed very smooth, soft and uniform. Soybean curd prepared with GDL had the lowest acceptability because of sour taste. The texture and acceptability of soybean curds were influenced by the type of coagulant.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.1
• /
• pp.22-27
• /
• 2006

This study was carried out to determine the optimum conditions for making soybean curd(or tofu) from defatted soybean flour.. Heating soymilk above $80^{\circ}C$ for at least $5{\sim}10\;min$ was necessary for soybean protein to form aggregates during subsequent coagulation process with glucono-${\delta}$-lactone(GDL). For maximum yield of tofu, with water content of approximately 80%, extra addition of 20 g of oil and 5 g of GDL per 425 g of soybean flour was needed. Maintaining soymilk temperature around $75^{\circ}C$ for 5 min was necessary when GDL was used as the coagulant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.455-459
• /
• 2001

Tofu (soybean curd) was made with whole soybean flour (WSF, 420 mesh) by various processing conditions of water addition ratio, heating time, coagulation temperature, molding pressure and 0.3% of mixed coagulant (CaSO₄:GDL=50:50(w/w)). Yield content of WSF-tofu was the highest in processing condition of 85℃ coagulation temperature, 10 times water addition, 5min. heating time and 25.00 g/㎠ molding pressure. As the increase of the water addition ratio from 8 to 14 times (water:WSF, v/w), Hunter's L and a values were increased. Raising of heating time (100℃, 1, 5, 10 and 15 min), a and b value were increased. Textural properties of WSF-tofu were significantly affected by coagulation temperature (75, 80, 85 and 90℃). Hardness was increased, but adhesiveness and cohesiveness were decreased. heating time was influenced on harness of WSF-tofu, but water addition ratio was not affected on hardness of WSF-tofu. Increasing of molding pressure (16.83, 25.00, 33.22 and 41.67 g/㎠, 1 hr) was resulted from a increased hardness, gumminess and chewingss of tofu, but adhesiveness was addition ratio, 5 min heating time and 25.00 g/㎠ molding pressure recorded the highest score in sensory evaluation test.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.42-48
• /
• 2016

In order to investigate the utilization of the Omija (Schizandra chinensis Baillon) extract as a natural coagulant for manufacturing soybean curd, the quality characteristics of white (Baktae) and black (Seoritae) soybean curds, coagulated by the Omija extract or $MgCl_2$, were evaluated. Crude protein ($6.14{\pm}0.30$ and $6.25{\pm}0.18%$, respectively) and crude lipid ($10.86{\pm}1.74$ and $11.29{\pm}1.69%$, respectively) contents of white and black soybean curds coagulated using the Omija extract were higher than those coagulated using $MgCl_2$. Black soybean curds coagulated using the Omija extract showed higher L, a, and b values than those using $MgCl_2$. The most abundant amino acid in white and black soybean curds coagulated using the Omija extract was arginine (3.74 and 3.71 mg/100 g, dry basis, respectively). The amounts of Ca, K, Mg, and Na were the highest in both soybean curds prepared with the Omija extract. The sensory evaluation (color, flavor, taste, texture, and overall preference) showed that white and black soybean curds coagulated using the Omija extract were more preferred than those produced using $MgCl_2$. The results suggested that using the Omija extract as a natural coagulant agent could improve the quality and sensory characteristics of soybean curds.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.325-329
• /
• 1995

Changes in the physical properties of soybean curd upon the processing conditions such as coagulant concentration, heating temperature and molding pressure were determined by using a failure stress and residual delay time of ultrasonic wave(5 MHz). Maximum failure stress of Tofu was obtained at the 0.3% $CaCl_2$ coagulant concentration, $95^{\circ}C$ heating temperature and greater molding pressure, respectively, whereas the delay time is inverse proportion to the failure stress value. The results of the multiple regression analysis with factorial design showed that the model equation consisted with delay time and processing conditions gave the good prediction of the Tofu failure stress.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2013

To investigate the usability of the bitterns produced during salt manufacture, the characteristics of soybean curds coagulated with bitterns like solar salt bitterns (SSB), dehydrated salt bitterns (DSB), concentrated sea water (CSW) and bitterns produced during the storage of solar salt (BSS) were measured. The Mg contents of all the bitterns were the same, but the Na content of the BSS was 1.0-2.0 times as high as that of the other bitterns. The yield of the soybean curds did not differ with the addition of coagulants, except for the CSW. However, the soybean curds were acquired in large quantities by the DSB and CSW. The mg and Na contents of the soybean curds that were made with the bitterns were higher than those of $MgCl_2$. The heavy metals were below 3 ppm in the curds, especially those produced by the CSW, but Pb was not detected. Among the mechanical characteristics of the soybean curds, their adhesiveness was not affected by the coagulants, but the mechanical hardness of the curds produced by the DSB and CSW was lower. The sensory evaluation showed that the curds that were produced by the bitterns were more highly preferred than those produced by $MgCl_2$. In particular, the soybean curd that was made with the CSW was favored due to its soft texture. The results of this study, particularly the high yield of the curds that showed a soft texture, showed that the bitterns, especially the CSW, could be used safely and economically.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.231-236
• /
• 1978

It has been investigated that preparation of cheese-like product from defatted soybean milk and changes during 6 weeks' ripening. Obtained results were as follows: 1. Defatted soybean milk was fermented at $37^{\circ}C$ for 4 hours with Streptococcus lactis YUFE L-4 without addition of any other carbon sources. 2. Optimum concentration of coagulant such as $MgCl_2{\cdot}6H_2O$ and $CaCl_2$ were 0.0125M and 0.0375M, respectively. 3. Coagulating time for 30 minutes was sufficient to make curd. 4. Optimal reaction temperature for coagulating were $50^{\circ}C$. 5. After 6 weeks' ripening, moisture content was approximately $62{\sim}63%$. Water and 10%-TCA soluble nitrogen contents of soybean cheese with Asp. saitoi protease were higher than those of Mucor rennet. Water soluble nitrogen content of Asp. saitoi protease cheese was 50.5% and 10%-TCA soluble nitrogen was 27.5%.