• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.1
• /
• pp.11-23
• /
• 2002

The concentrations of aldehydes were measured in downtown area of Buchun and Kwanghwamoon of Seoul from October 1997 to August 1998 using 2-series impingers. The data have been analysed to identify the seasonal pattern of aldehyde sources in metropolitan areas. The measured concentration (in ppbv) of aldehydes were 8.86 $\pm$ 7.28 HCHO (formaldehyde) and 7.79$\pm$7.29 $CH_3$CHO (acetaldehyde) in Buchun, while recording 10.13$\pm$8.58 (HCHO) and 7.64$\pm$6.65 ($CH_3$CHO) in Kwanghwamoon. Their diurnal variation patterns showed significant increase of HCHO and $CH_3$CHO concentration in early afternoon, indicating an increase in secondary sources. Their concentrations however decreased in the nighttime, regardless of seasons. The strength of correlations between certain pairs such as (1) HCHO and CO and (2) $CH_3$CHO and CO were generally high during the winter months (0.64< r < 0.84), suggesting the possibility of similar source processes for HCHO, $CH_3$CHO and CO. On the other hand during the summer months, their correlations are frequently lower than winter months. We suggested that the complexity of source/sink processes during the summer period may reduce the correlations between aldehyde and CO.

• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.945-954
• /
• 2002

The objective okgf this study is understanding and evaluation of temporal and spatial variation of pollutant loads by input sources for water quality management in Kamak Bay. Flow rate of rivers and ditches ranges from about $2,592-63,072m^3/d$ in October to $864-55,296m^3/d$ in January. In particular, the R2 predominated flow rate among input sources. Total COD, BOD, DIN and DIP loadings in January were about 896kg/d, 718kg/d, 2,152kg/d, and 154kg/d, respectively, which exceeded those of October. Lower POC/TOC levels are estimated in R2, and also in October. Temporal variation of pollutant loads were closely related to the human activity. Total discharging loadings of BOD, TN and TP by unit loading estimation were 4,993.0kg/d, 2,558.7kg/d, and 289.2kg/d, respectively, and were mainly affected by the population. Runoff ratio of BOD was about 0.14 in January Mean $NH_4^＋_-N$ and $PO_4\;^{3-}-P$ loadings from sediment were 16.23mg/$m^2$/d and 7.26mg/$m^2$/d, respectively. For the improvement of water quality in this area, not only pollutant loads of rivers and ditches but also benthic flux from sediment should be reduced within the limits of the environmental capacity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.19-23
• /
• 2008

The AQM (Active Queue Management) starts dropping packets earlier to notify traffic sources about the incipient stage of congestion. The AQM improves fairness between response flow (like TCP) and non-response flow (like UDP), and it can provide high throughput and link efficiency. In this paper, we suggest the QVARED (Queue Variation Adaptive RED) algorithm to respond to bursty traffic more actively. It is possible to provide more smoothness of average queue length and the maximum packet drop probability compared to RED and ARED (Adaptive RED). Therefore, it is highly adaptable to new congestion condition. Our simulation results show that the drop rate of QVARED is decreased by 80% and 40% compare to those of RED and ARED, respectively. This results in shorter end-to-end delay by decreasing the number of retransmitted packets. Also, the QVARED reduces a bias effect over 18% than that of drop-tail method; therefore packets are transmitted stably in the bursty traffic condition.

• Journal of the Korean Society of Costume
• /
• v.59 no.4
• /
• pp.67-81
• /
• 2009

This study aims to characterize the effect of different combinations of chromatic-achromatic colors and 1:2:3 area-ratio variation of stripe necktie, and gender on the image of male wearer. The experimental materials developed for this study are a set of stimuli and response scales. The stimuli consist of 84 color pictures manipulated with every combination of 12 different colors and 7 different area-ratio. The 7-point scale designed for visual evaluation of image formation included 26 bipolar adjectives. The subjects were 2016 undergraduate students in Gyeongnam, Seoul, Busan, and Daegu areas. The results of this study were as follows. The analyses of images of male wearer in terms of combinations of chromatic-achromatic colors and I :2:3 area-ratio variation of oblique stripe necktie reveal that the concerned factors are of five characteristic dimensions of youth-activity, ability, attractiveness, appeal, and warmness. In addition, it has been found that individual images of male wearer are affected by observer's gender as well as combinations of chromatic-achromatic colors and 1:2:3 area-ratio variation of stripe neckties and that those images vary with every combination of each factor. The study results are highly expected to be used as useful sources in developing necktie designs.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.123-144
• /
• 2017

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.

• Korean Journal of Community Nutrition
• /
• v.3 no.3
• /
• pp.423-429
• /
• 1998

This study examined within- and between-person variation in nutrient intakes in order to estimate the degree of precision in dietary assessment among 37 males and 46females whose mean age was 70.4 years old. To collect dietary data, each subject was interviewed 5 or 6 times using a 24-hour recall method during a 3 month period. Within- person variation ranged from 23.5% to 101.2%. Lower values of within-person variation were observed in energy, carbohydrated, protein and phosphorous while higher value was observed in vitamin A. Between person variations of nutrient intakes ranged 12.6-23.5% in most nutrients. With 1 day dietary data, observed nutrient intakes were estimated to within 6-25% of the group's usual9true) intakes and 52-198% of the individuals' usual intakes. The values of these maximum percentage deviations became smaller when the number of dietary recalls increased. The results of this study suggest that the Korean elderly subjects appear to have a slightly less diverse diet compared to young Korean women. Within persons, intakes of nutrients largely from animal sources were more variable for the Korean elderly than for their counterparts in Western countries. This study also implies that commonly used 1 day dietary study may be appropriate for assessing group means of nutrient intakes, but clearly not appropriate for assessing individual's nutrient intakes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.511-515
• /
• 2013

A Monte Carlo (MC) simulation study has been done in order to investigate the effects of line-edge-roughness (LER) induced by either 1P1E (single-patterning and single-etching) or 2P2E (double-patterning and double-etching) on fully-depleted silicon-on-insulator (FDSOI) tri-gate metal-oxide-semiconductor field-effect transistors (MOSFETs). Three parameters for characterizing the LER profile [i.e., root-mean square deviation (${\sigma}$), correlation length (${\zeta}$), and fractal dimension (D)] are extracted from the image-processed scanning electron microscopy (SEM) image for each photolithography method. It is experimentally verified that two parameters (i.e., ${\sigma}$ and D) are almost the same in each case, but the correlation length in the 2P2E case is longer than that in the 1P1E case. The 2P2E-LER-induced $V_TH$ variation in FDSOI tri-gate MOSFETs is smaller than the 1P1E-LER-induced $V_TH$ variation. The total random variation in $V_TH$, however, is very dependent on the other major random variation sources, such as random dopant fluctuation (RDF) and work-function variation (WFV).

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.119-125
• /
• 2014

This study investigated the effects of pipe network materials and distance on system performance utilizing unused energy sources in large-scale horticulture facility. For this, the modeling was performed with a 100 m long and 100 m wide rectangular shaped glass house having an area of 1ha ($10,000m^2$) using EnergyPlus software. The heat sources considered were air source, geothermal heat, power plant waste heat, sea water heat, and river water. The temperature variation of the fluid with regard to pipe material and distance from the heat source and the resultant heat pump electricity consumptions were calculated. It turned out that the fluid temperature reaching the heat pump increased as the distance from the heat source increased in case of sea water and river water, which have higher temperatures than the surrounding soil, improving the heat pump efficiency. It was vice versa in case of the power plant waste heat. In addition, pipe material of PVC showed the smallest effect on the system performance variation due to the lowest thermal conductivity, compared to PB and HDPE.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.740-747
• /
• 2007

The advanced wastewater treatment plant of leather industry was selected to evaluated with its effluent water quality and statistical characteristics. Most of pollutants removal efficiencies were over 90% as well. And 95% reliability of effluent concentration were 106.8 mg/L of $COD_{mn}$, 72.04 mg/L of TN. However Effluent quality of TN exceeds the regulated limit. The range of coefficient of variation (CV) were between 0.18 and 2.49. Also, coefficient of reliability (COR) were between $0.03(BOD_5){\sim}0.63(COD_{mn})$ and 0.43 in terms of T-N, $Z_{l-a}$(Normalized Percentiles) value were 55.7 and 2.25 in terms of $BOD_5$ and T-N as shown in the following table.