Statistical Characteristics of An Advanced Wastewater Treatment Plant for Leather Industry

피혁폐수 고도처리시설의 통계학적 특성

  • Yang, H.J. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research) ;
  • Kwon, O.S. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research) ;
  • Kim, J.H. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research) ;
  • Kim, S.H. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research) ;
  • Lee, S.J. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research) ;
  • Jung, D.I. (Emission Sources Research Division, Environmental Cap System Research Dept., National Institute of Environmental Research)
  • 양형재 (국립환경과학원 환경총량관리연구부) ;
  • 권오상 (국립환경과학원 환경총량관리연구부) ;
  • 김재훈 (국립환경과학원 환경총량관리연구부) ;
  • 김상훈 (국립환경과학원 환경총량관리연구부) ;
  • 이성종 (국립환경과학원 환경총량관리연구부) ;
  • 정동일 (국립환경과학원 환경총량관리연구부)
  • Received : 2007.07.26
  • Accepted : 2007.09.18
  • Published : 2007.09.30

Abstract

The advanced wastewater treatment plant of leather industry was selected to evaluated with its effluent water quality and statistical characteristics. Most of pollutants removal efficiencies were over 90% as well. And 95% reliability of effluent concentration were 106.8 mg/L of $COD_{mn}$, 72.04 mg/L of TN. However Effluent quality of TN exceeds the regulated limit. The range of coefficient of variation (CV) were between 0.18 and 2.49. Also, coefficient of reliability (COR) were between $0.03(BOD_5){\sim}0.63(COD_{mn})$ and 0.43 in terms of T-N, $Z_{l-a}$(Normalized Percentiles) value were 55.7 and 2.25 in terms of $BOD_5$ and T-N as shown in the following table.

Keywords

References

  1. 국립환경연구원, 환경관리기술의 평가기술-폐수처리공정별 BAT 평가 및 원단위 산정 (2004)
  2. 선상운, 신뢰성에 기초한 하수처리장의 설계 및 처리효율 평가, 석사학위논문, 한양대학교 (2001)
  3. 이해용, 이필영, 통계학 입문, 자유아카데미 (1997)
  4. 환경부, 수질오염공정시험방법 (2003)
  5. APHA, Standard Methods for the Examination of Water and Wastewater, 18th ed. (1992)
  6. Salar, N., Niku, S., Schroeder, E. D., and Samaniego, E. L., Performance of Activated Sludge Process and Reliability- based design, Journal WPCF, 51(12), pp. 2841- 2857 (1979)