• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.219-224
• /
• 2019

BACKGROUND: Soil bacteria play important roles in organic matter decomposition and nutrient cycling during the non-growing season. The purpose of this study was to investigate the effects of soil management and chemical properties on the utilization of carbon sources by soil bacteria in paddy fields. METHODS AND RESULTS: The Biolog EcoPlate was used for analyzing community-level carbon substrate utilization profiles of soil bacteria. Soils were collected from the following three types of areas: plain, interface and mountain areas, which were tested to investigate the topology effect. The results of canonical correspondence analysis and Kendall rank correlation analysis showed that soil C/N ratio and NH₄⁺ influenced utilization of carbon sources by bacteria. The utilization of carbohydrates and complex carbon sources were positively correlated with NH₄⁺ concentration. Cultivated paddy fields were compared with adjacent abandoned fields to investigate the impact of cultivation cessation. The level of utilization of putrescine was lower in abandoned fields than in cultivated fields. Monoculture fields were compared with double cropping fields cultivated with barley to investigate the impact of winter crop cultivation. Cropping system altered bacterial use of carbon sources, as reflected by the enhanced utilization of 2-hydroxy benzoic acid under monoculture conditions. CONCLUSION: These results show that soil use intensity and topological characteristics have a minimal impact on soil bacterial functioning in relation to carbon substrate utilization. Moreover, soil chemical properties were found to be important factors determining the physiological profile of the soil bacterial community in paddy fields.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.379-379
• /
• 2013

본 논문에서는 Normal ink jetting 공법으로 OTFT를 제작할 때 coffee stain effect에 의해서 반도체 소자의 특성이 저하되는 것을 극복하기 위해서 동일한 위치에 동일한 부피로 Droplet을 형성하는 Multiple ink jetting 공법을 통해 TIPS pentacene 결정의 Morphology와 전기적 특성이 어떻게 변화하는지 알아 보았다. Multiple ink jetting의 drop 횟수가 증가할수록 coffee stain effect에 의해서 형성된 가운데 영역의 Dendrite grain이 점점 작아지다가 7 Drops 이후로는 Big grain 만 남게 되었다. Active layer의 표면 Roughness는 drop 횟수가 증가할수록 낮아지다가 일정 count 이후로는 다시 높아지는 것을 확인할 수 있었다. 전계 이동도(mobility)는 drop 횟수가 증가할수록 커지다가 일정 count 이후로는 saturation되는 것을 확인할 수 있었다. Multiple ink jetting에 의해서 만들어진 OTFT 소자의 전계 이동도(mobility)는 1 drop과 10 drops에서 각각 0.0059, 0.036 cm2/Vs 로 6배 정도 차이가 있었다. 이것은 첫 drop에 의해 만들어진 가운데 Dendrite grain 영역이 Multiple ink jetting을 반복하면서 점점 작아지게 되어 사라지고 두꺼운 Grain 영역만 남게 된 것으로 판단된다. Vth 와 On/Off ratio는 1 drop과 10 drops에서 각각 -3 V, -2 V 그리고 $3.3{\times}10^3$, $1.0{\times}10^4$를 보였다. OTFT의 substrate로 Flexible한 polyethersulfone (PES) 기판을 사용하였고, 절연체로 Spin coating된 Poly-4-vinylphenol (PVP)가 사용되었으며, Gate 및 Source/Drain 전극은 Au를 50 nm 두께로 증착하였다. Channel의 width와 length는 각각 100 um, 40 um 였고, Gate 전극 위에 Active layer를 형성한 Bottom gate 구조로 제작되었다. Ink jet으로 제작된 TIPS pentacene의 결정성은 x-ray diffraction (XRD)와 광학 현미경으로 분석하였고 Thickness profile은 알파스텝 측정기를 이용하였으며, OTFT의 전기적 특성은 Keithley-4,200을 사용하여 측정하였다.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2012

BACKGROUND: The analysis for the concentration and enantiomeric ratio of OCPs have been performed to confirm the distribution and to emonstrate the pollution characteristics of chiral OCPs in ambient air. METHODS AND RESULTS: In ambient air at coastal and inland sites, concentrations and enantiomer fractions (EFs) of heptachlor (HEPT), eptachlor epoxide (HEPX), trans-chlordane (TC), cis-chlordane (CC), xychlordane (OXY), 2,4'-DDT, 2,4'-DDD with HRGC/HRMS were investigated to understand source and distribution of chiral organochlorine pesticides (OCPs) in ambient air. The mean concentrations of OCPs in ambient air were at the range of 0.027(heptachlor)~1.279 (4,4'-DDT) pg/m3 and 0.0005 (heptachlor)~0.1043 ng/g d.w. (TC), respectively. The mean EFs of OCPs in ambient air were at the range of 0.73 (HEPX)~0.45 (CC). Both preferential depletions of (+) and (-) enantiomer were observed for CC, indicated by EFs either <0.5 or >0.5, while preferential depletions of (-) enantiomer which mean EFs <0.5 were observed for chiral OCPs except TC and MC-5. CONCLUSION: OCPs in ambient air have been distributed from soil, but some of them such as chlordane, DDT etc. might have been introduced by long-range atmospheric transport, considering EFs by chiral analysis and trajectory analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.26-31
• /
• 2016

The Townsend to glow discharge mode transition was investigated in the dielectric barrier discharge (DBD) helium plasma source which was powered by 20 kHz / $4.5 kV_{rms}$ high voltage at atmospheric pressure. The spatial profile of the electric field strength at each modes was measured by using the intensity ratio method of two helium emission lines (667.8 nm ($3^1D{\rightarrow}2^1P$) and 728.1 nm ($3^1S{\rightarrow}2^1P$)) and the Stark effect. ICCD images were analyzed with consideration for the electric field property. The Townsend discharge (TD) mode at the initial stage of breakdown has the light emission region located in the vicinity of the anode. The electric field of the light emitting region is close to the applied field in the system. Immediately, the light emitting region moves to the cathode and the discharge transits to the glow discharge (GD) mode. This mode transition can be understood with the ionization wave propagation. The electric field of the emitting region of GD near cathode is higher than that of TD near anode because of the cathode fall formation. This observation may apply to designing a DBD process system and to analysis of the process treatment results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.80-90
• /
• 1994

The ultra shallow junction was formed by 2-step RTP. Phosphorus solid source(P$_{2}O_{5}$) was transfered on wafer surface during RTG(Rapid Thermal Glass Transfer) of which process condition was 80$0^{\circ}C$ and 60sec. The process temperature and time of the RTD(Rapid Thermal Diffusion) were 950~105$0^{\circ}C$ during 5~15sec respectively sheet resistances were measured as 175~320$\Omega$/m and junction depth and dopth and dopant surface concentration were measured as 0.075~0.18$\mu$m and 5${\times}10^{19}cm^{4}$ respectively. Ti-silicide was formed by 2-step RTA after 300$\AA$ Titanium was deposited. The 1st RTA (2nd RTA) was carried out at the temperature of $600^{\circ}C$(700~80$0^{\circ}C$) for 30 seconds (10~60 seconds) under N$_2$ ambient. Sheet resistances after 2nd RTA were measured as 46~63$\Omega$/D. Si/Ti component ratio was evaulated as 1.6~1.9 from Auger depth profile. Ti-Silicided n-p junction diode (pattern size : 400$\times$400$\mu$m) was fabricated under the RTD(the process was carried out at the temperature of 100$0^{\circ}C$ for 10seconds) and 2nd RTA(theprocess was carried out at the temperature of 750$^{\circ}C$ for 60 seconds). Leakage current was measured 1.8${\times}10^{7}A/mm^{2}$ at 5V reverse voltage. Whent the RTD process condition is at the temperature of 100$0^{\circ}C$ for 10seconds and the 2nd RTA process condition is at the temperature of 75$0^{\circ}C$ for 60 seconds leakage current was 29.15${\times}10^{9}A$(at 5V).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2009

Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.

• Journal of Animal Science and Technology
• /
• v.61 no.3
• /
• pp.138-146
• /
• 2019

Vitamin $B_3$ (niacin) is essential for all living cells and plays a central role in energy metabolism and oxidative phosphorylation. Vitamin $B_3$, a water-soluble vitamin, is present in the form of nicotinic acid and nicotinamide, a monocarboxylic acid derivative of pyridine. While nicotinic acid is commonly effective in lowering cholesterol levels, unlike nicotinic acid, nicotinamide is ineffective on lipids. Presence rates of nicotinic acid and nicotinamide, which are the available forms of vitamin $B_3$, are different for each food. However, the studies in the literature are generally based on the analysis of total amount of vitamin $B_3$ in foods and the studies determining the profile of vitamin $B_3$ in foods are limited. The aim of the study was to determine the vitamin $B_3$ profiles of 10 kinds of animal based food and 10 different plant based food samples. In this study, 10 kinds of animal based food samples consisting of veal (veal steak fillet), chicken (breast), turkey meat (thigh), goat meat (leg, belly), lamb (leg, back, arm), mutton (belly), bovine meat (loin) and 10 different plant based food samples namely; barley, rye, wheat (bread), wheat (durum), oat, rice, dried pea, green lentil, red lentil and chickpea were studied by high performance liquid chromatography using post-column derivatization system. The presence rates of nicotinic acid and nicotinamide were determined in the meat samples as 30% and 70% and as 87% and 13% in the cereal and legume samples, respectively. Nicotinic acid levels were found in low amounts in the meat samples. The amounts of nicotinic acid in the cereal and legume samples were significantly higher than the meat samples. Consequently, the plant based foods such as cereals and legumes, with a ratio of 87% nicotinic acid presence, standout as the best source of nicotinic acid and encouraging regular intake of those cereals and legumes containing rich nicotinic acid would remove nicotinic acid deficiency in human.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.254-257
• /
• 2022

Owing to its excellent nutritional value, eggs are among the most important components of the human diet. Gender and environmental factors, such as feed composition, may alter the nutritional profile and quality of eggs. Feed additives have recently been used to enhance the health and productivity of hens, which has resulted in the production of higher-quality eggs. The fungus Cordyceps militaris, a well-established source of traditional medicines, contains potential bioactive metabolites, which prompted us to examine the effects of C. militaris-supplemented diets on the quality of hens' eggs. The hens of two species (Gallus gallus domesticus and Araucana) were fed with one of three different diets: a control diet and diets supplemented with 2% or 5% of C. militaris. Egg quality was determined by measuring the Haugh Unit, yolk color, and shell thickness. In addition, egg and shell densities together with the ratio of yolk to albumen were calculated. Eggshell thickness and yolk color were both enhanced by the addition of C. militaris, whereas Haugh Unit values were somewhat reduced. Egg size, eggshell weight, and yolk and albumen production were all enhanced by C. militaris supplementation. Notably, in hens fed the 2% C. militaris-supplemented diet, enhancement was more evident in the yolk than in the albumen. The overall quality of the egg yolk was enhanced when 2% C. militaris was added to the hens' diet, which led to increases in both yolk color and quantity. Eggshell thickness and weight were also higher among eggs laid by hens fed the supplemented diets. Although these effects differed depending on the chicken species, we established that, in general, C. militaris contributes to improving egg quality.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.109-120
• /
• 1991

Total body irradiation is operated to irradicate malignant cells of bone marrow of patients to be treated with bone marrow transplantation. Field size of a linear accelerator or cobalt teletherapy unit with normal geometry for routine technique is too small to cover whole body of a patient. So, any special method to cover patient whole body must be developed. Because such environments as room conditions and machine design are not universal, some characteristic method of TBI for each hospital could be developed. At Seoul National University Hospital, at present, only a cobalt unit is available for TBI because source head of the unit could be tilted. When the head is tilted outward by 90$^{\circ}$, beam direction is horizontal and perpendicular to opposite wall. Then, the distance from cobalt source to the wall was 319 cm. Provided that the distance from the wall to midsagittal plane of a patient is 40cm, nominal field size at the plane(SCD 279cm) is 122cm$\times$122cm but field size by measurement of exposure profile was 130cm$\times$129cm and vertical profile was not symmetric. That field size is large enough to cover total body of a patient when he rests on a couch in a squatting posture. Assuming that average lateral width of patients is 30cm, percent depth dose for SSD 264cm and nominal field size 115.5cm$\times$115.5cm was measured with a plane-parallel chamber in a polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom of size 25cm wide and 30cm deep. Depth of dose maximum, surface dose and depth of 50% dose were 0.3cm, 82% and 16.9cm, respectively. A dose profile on beam axis for two opposing beams was uniform within 10% for mid-depth dose. Tissue phantom ratio with reference depth 15cm for maximum field size at SCD 279cm was measured in a small polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom with TLD chips inserted in holes on the largest coronal plane was bilaterally irradiated by 15 minute in each direction by cobalt beam aixs in line with the cross line of the coronal plane and contact surface of sections No. 27 and 28. When doses were normalized with dose at mid-depth on beam axis, doses in head/neck, abdomen and lower lung region were close to reference dose within $\pm$ 10% but doses in upper lung, shoulder and pelvis region were lower than 10% from reference dose. Particulaly, doses in shoulder region were lower than 30%. On this result, the conclusion such that under a geometric condition for TBI with cobalt beam as SNUH radiotherapy departement, compensators for head/neck and lung shielding are not required but boost irradiation to shoulder is required could be induced.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6059-6062
• /
• 2012

Regional cancer epidemiology is an important basis for determining the priorities for cancer control in different countries worldwide. There is no reliable information about the pattern of head and neck cancer in western Nepal and hence an attempt was here made to evaluate the situation based on hospital data, which provide the only source in the western region of Nepal. A clinicopathological analysis of head and neck cancers treated between 2003 and 2006 in Manipal Teaching Hospital affiliated to Manipal College of Medical Sciences, Pokhara, Western Development Region, Nepal was performed. A total of 105 head and neck cancer cases were identified with a male to female ratio of 1.8:1. The median ages of male and female patients were 62 and 64 years, respectively. Ninety-seven (92.4%) of the cancer patients were suffering from carcinoma, three (2.9%) had blastoma, three (2.9%) had sarcoma, and two (1.9%) had lymphoma. The majority (61.9%) of carcinoma cases were squamous cell carcinoma followed by anaplastic carcinoma (7.2%). Of the carcinoma cases, the most common site of primary lesion was larynx (19.6%), followed by the thyroid (14.4%), the tongue and hypopharynx with 10.3% cases each. Comparative analysis among males and females did not reveal any sex difference in type of head and neck cancers. The head and neck cancer pattern revealed by the present study provides valuable leads to cancer epidemiology in western Nepal and useful information for health planning and cancer control, and future research in western Nepal.