• Journal of the Korea Computer Graphics Society
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2012

Video-based modeling / rendering developed to produce photo-realistic video contents have been one of the important research topics in computer graphics and computer visions. To smoothly combine original input video clips and 3D graphic models, geometrical information of light sources and cameras used to capture a scene in the real world is essentially required. In this paper, we present a simple technique to estimate the position and orientation of an optimal light source from the topology of objects and the silhouettes of shadows appeared in the original video clips. The technique supports functions to generate well matched shadows as well as to render the inserted models by applying the estimated light sources. Shadows are known as an important visual cue that empirically indicates the relative location of objects in the 3D space. Thus our method can enhance realism in the final composed videos through the proposed shadow generation and rendering algorithms in real-time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.333-339
• /
• 2017

Transmission signal in wireless environment receives a signal in which a source signal, interference, and noise are mixed. The goal of this study is to estimate the desired signal from the received signal. In this paper, we have studied a method correctly estimating a target in spatial by modified beamformer method. The modified bemaformer uses an adaptive array antenna and perturbation matrix to obtain the optimal weight, and estimate the desired signal by radiating the beam in spatial. We estimate a desired signal of the target by improving resolution with the modified beamformer method which does not have complicated calculation amount. Through simulation, we compare and analyze the modified beamformer method and the MUSIC method with good resolution. In result of simulation, we showed that modified beamformer method has better resolution of 10degree than classical beamformer method and showed similar performance as the MUSIC method. The resolution of this paper was estimated to be about 5 degrees.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.468-477
• /
• 2007

The DTC of voltage source inverter-fed PMSMs is based on hysteresis controllers of torque and flux. It has several advantages, namely, elimination of the mandatory rotor position sensor, less computation time, and rapid torque response. In addition, the stator resistance is the only parameter, which should be known, and no reference frame transformation is required. The DTC theory has achieved great success in the control of induction motors. However, for the control of PMSM drives proposed a few years ago, there are many basic theoretical problems that must be clarified. This paper describes an investigation into the effect of the zero voltage space vectors in the DTC system and points out that if using it rationally, not only can the DTC of the PMSM drive be driven successfully, but torque and flux ripples are reduced and overall performance of the system is improved. The implementation of DTC in PMSM drives is described and the switching tables specific for an interior PMSM are derived. The conventional eight voltage-vector switching table, which is namely used in the DTC of induction motors does not seem to regulate the torque and stator flux in a PMSM well when the motor operates at low speed. Modelling and simulation studies have both revealed that a six voltage-vector switching table is more appropriate for PMSM drives at low speed. In addition, the sources of difficulties, namely, the error in the detection of the initial rotor position, the variation of stator resistance, and the offsets in measurements are analysed and discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.1-7
• /
• 2007

Generally, an electric railroad feeding system has many problems due to the different characteristics in contrast with a load of general three-phase AC electric power system. One of them is harmonics problem caused by the switching device existing in the feeding system, and moreover, the time-varying dynamic loads of rail way is inherently another cause to increase this harmonics problem. In Korea power systems, the electric railroad feeding system is directly supplied from the substation of KEPCO. Therefore, if voltages fluctuation or unbalanced voltages are created by the voltage and current distortion or voltage drop during operation, it affects directly the source of supply. The trainloads of electric railway system have non-periodic but iterative harmonic characteristics as operating condition, because the electric characteristic of the electric railroad feeding system is changed by physical conditions of the each trainload. According to the traditional study, the estimation of harmonics has been performed by deterministic way using the steady state data at the specific time. This method is easy to analyze harmonics, but it has limits in some cases which needs an assessment of dynamic load and reliability. Therefore, this paper proposes the probabilistic estimation method, moments matching method(MW) in order to overcome the drawback of deterministic method. In this paper, distributions for each harmonics are convolved to obtain the moments and cumulants of TDD(Total Demand Distortion), and this can be generalized for any number of trains. For the case study, the electric railway system of LAT(Intra Airport Transit) in Incheon International Airport is modeled using PSCAD/EMTDC dynamic simulator. The raw data of harmonics for the moments matching method is acquired from simulation of the LAT model.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.83-93
• /
• 2016

For the continuous stable production of oyster, estimation of food availability (F) was carried out in Goseong Bay, south of coast Korea. Primary productivity ranged from 0.07 to $0.44gC/m^2/day$ (average $0.25gC/m^2/day$), lowest in July and highest in January. The distribution of primary productivity at Goseong Bay showed the pattern of "high in the south and low in the north." Food availability (F) was $F{\leq}0$, indicating insufficient food supply, from August to November and F > 0 from January to April. Continuous insufficient food supply was observed at 18 oyster farms in the southern part of the bay and 4 in its northern part. Mortality at the oyster farms was 56% on the average, and around 58% of death occurred during November when food supply was insufficient. The optimal population of cultured oyster per unit flow area was calculated to be $110-115indiv./m^2$ (198-201 indiv./string). When the sea area was divided into 3 regions (A, B, C) according to carrying capacity, the carrying capacity of (A) regions was $52-53indiv./m^2$ (93-95 indiv./string), (B) regions was $142-144indiv./m^2$ (255-259 indiv./string), and (C) regions was $198-202indiv./m^2$ (356-363 indiv./string). In particular, (A) regions showed extremely low productivity. For continuous stable oyster farming at Goseong Bay, it is necessary to control point and non-point source pollution through continuous environmental monitoring and to adjust harvest according to the base carrying capacity during the season of high water temperature.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.4
• /
• pp.195-204
• /
• 2010

Due to improved wireless communication technologies, it is possible to provide multimedia streaming service for mobile device clients like PDAs and cellphones. Wireless networks are serviced on low bandwidth channels and mobile devices work on limited hardware specifications. In these conditions, transcoding technologies are needed to adapt the media for streaming services to given mobile environments. To transcode from the source media to the target media for corresponding grades, transcoding servers perform transcoding jobs as exhausting their resources. Since various transcoding loads occur according to the target transconding grades, an effective transcoding load balancing policy is required among transcoding servers. In addition to transcoding process, servers should maintain QoS streams for mobile clients for total serviced times. It requires real-time requirements to support QoS for various mobile clients. In this paper, a new transcoding load distribution method is proposed. The proposed method can be driven for fair load balance between distributed transcoding servers. Based on estimated transcoding time, movie information and target transcoding bit-rate, it provides fair transcoding load distribution and also performs admission control to support QoS streams for mobile clients.

• Journal of the Korean housing association
• /
• v.17 no.3
• /
• pp.61-69
• /
• 2006

Vertical vibrations on the slab of buildings are affected by types of vibration sources, transfer paths, and the material property and the size of members. Among these parameters, the vibration sources and the transfer path can not be controlled, but the property and the size of members can be controlled in the phase of design the members. In this study, the vibration responses according to the property and size of members were obtained by using a prediction program based on dynamic-stiffness matrix. Three parameters which are not usually considered as major factors for architecral planning were selected fur these analyses. They are the strength of materials, the thickness of wall and the thickness of slab. The ground vibration source located near a building was used as vibration input data in the analyses. This study has its originality on presenting appropriate property and size of structural members in order to reduce vertical vibration of slab in shear-wall structures. Analysing the results from the vibration estimation program according to the variations of parameters, the appropriate ratio among the sizes of structural members were proposed. From these results, the vibration level on the slab which is not constructed yet would be predicted and the vibration peak level can be reduced or shifted into the desirable frequency range. Therefore, the vertical vibration could be controlled in the phase of designing buildings.

• Journal of Environmental Science International
• /
• v.15 no.4
• /
• pp.305-310
• /
• 2006

The color and structure of urban constructions is a factor of urban landscape and shows their characteristics. Hence the modern buildings deal with their materials and external appearance as an important factor, making up the urban image. But it was nearby impossible to evaluate the value of visual landscape with objective measuring method. Most of all, it depends on the subjective estimation of a few talented or high educated experts with a sense of beauty. Such kinds of estimation can in some cases include arbitrary interpretations. In relation to this kind of problems, it is tried here in this study to analyse the human response of brain wave pattern (EEG) with use of SD method, while the tested persons watch the urban landscape scenery constructed in a visual reality. The tested persons were 20 adult male and female with no color blindness and intact cognitive function. Light source with color filter was used for color environment in a dark soundproof chamber. The signal of EEG is analysed digitally and grouped into the ${\alpha}$ and ${\beta}$ waves. The result showed that relative power of ${\alpha}$ wave ratio increased in the natural landscape scenery with blue and green color. From these results it was possible to evaluate the human response, which is affected by urban and natural color and structure stimulation and it might be useful as an indicator of visual cognition amenity toward the design of urban construction environment.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.183-193
• /
• 1997

The amount and kinds of radionuclide contained in waste volume should be known to prepare for occupational exposure management, perform safety assessment and finally to license a repository. Although the volume of filters and resins are small, activities of them comprise most of the radioactivity that made during power generation. This study aims at developing a method of estimating the radionuclide accumulation at the filters and resins of coolant systems. In this study, accumulated amount of radionuclides is estimated by a computer program which makes use of instantaneous decontamination factor, DF, instead of average DF. A FORTRAN program was developed for the estimation. Data from in-plant source-term measurements at Rancho-Seco nuclear power plant in the United States are employed for verification of the estimating method. And experimental data are employed, too. The instantaneous-DF-method showed smaller error than the average-DF-method. Accumulated amount of radionuclides can be calculated with only the DF and the radionuclide concentration, which are measured periodically according to the operating guide. However, especially, when the operating condition of nuclear power plant changes rapidly, the measuring term of DF and radionuclide should be shortened to ensure the accurate estimation.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.64-72
• /
• 1997

Since the average speed calculated with encoder pulses inevitably has time delay, the control performance as well as the system stability is deteriorated. especially at the low speed region. Additionally, the distorted inverter output voltage due to the dead time effects and the forward voltage drops of the VSI (Voltage Source Inverter) causes torque ripples and their effects are more severe at the low speed operation of an induction motor. In this paper, an accurate speed estimation method using Kalman Filter Algorithm is presented to improve the performance of an induction motor speed control with a low precision encoder at low speed legion. The dead time effects and the forward voltage drops of the VSI are feedforwardly compensated to produce an exact inverter output voltage.