• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.16-20
• /
• 2017

Background: The design of deuteron accelerator neutron source facilities requires reliable yield estimation of gamma-rays as well as neutrons from deuteron-induced reactions. We have so foar measured systematically double-differential thick target neutron yields (DDTTNYs) for carbon, aluminum, titanium, copper, niobium, and SUS304 targets. In the neutron data analysis, the events of gamma-rays taken simultaneously were treated as backgrounds. In the present work, we have re-analyzed the experimental data for a thick carbon target with particular attention to gamma-ray events. Materials and Methods: Double-differential thick target gamma-ray yields from carbon irradiated by 5 and 9 MeV deuterons were measured using an NE213 liquid organic scintillator at the Kyushu University Tandem accelerator Laboratory. The gamma-ray energy spectra were obtained by an unfolding method using FORIST code. The response functions of the NE213 detector were calculated by EGS5 incorporated in PHITS code. Results and Discussion: The measured gamma-ray spectra show some pronounced peaks corresponding to gamma-ray transitions between discrete levels in residual nuclei, and the measured angular distributions are almost isotropic for both the incident energies. Conclusion: PHITS calculations using INCL, GEM, and EBITEM models reproduce the spectral shapes and the angular distributions generally well, although they underestimate the absolute gamma-ray yields by about 20%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.2
• /
• pp.193-207
• /
• 2016

This study discusses the present status of mercury emission and distribution from major anthropogenic sources in Korea and the future trend of mercury emission by activity changes and application of BATs. Atmospheric mercury emission from major anthropogenic sources based on Annex D of Minamata convention was estimated to around 4.89 tonne in 2012. Emission ratios of cement clinker production, coal-fired power plant, waste incineration and non-ferrous metal smelting were 68.68%, 24.75%, 6.29% and 0.28%, respectively. High mercury emission regions were characterized by the presence of cement clinker production facilities and coal-fired power plants. Prediction of future activities was carried out by linear regression of the previous year data. The (total) mercury emission was estimated to decrease up to 48% Under the scenario of BATs to be applied and the change of future activities. Emissions from coal-fired powerplants and cement clinkers were expected to decrease significantly.

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.369-380
• /
• 2017

The effects of the vertical component of a ground motion on the earthquake performances of semi-ductile high-rise R/C structures were investigated in the present study. Linear and non-linear time-history analyses were conducted on an existing in-service R/C building for the loading scenarios including and excluding the vertical component of the ground motion. The ratio of the vertical peak acceleration to the horizontal peak acceleration (V/H) of the ground motion was adopted as the main parameter of the study. Three different near-source earthquake records with varying V/H ratio were used in the analyses. The linear time-history analyses indicated that the incorporation of the vertical component of a ground motion into analyses greatly influences the vertical deflections of a structure and the overturning moments at its base. The lateral deflections, the angles of rotation and the base shear forces were influenced to a lesser extent. Considering the key indicators of vertical deflection and overturning moments determined from the linear time-history analysis, the non-linear analyses revealed that the changes in the forces and deformations of the structure with the inclusion of the vertical ground motion are resisted by the shear-walls. The performances and damage states of the beams were not affected by the vertical ground motion. The vertical ground motion component of earthquakes is markedly concluded to be considered for design and damage estimation of the vertical load-bearing elements of the shear-walls and columns.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.149-157
• /
• 2000

This paper presents the first results of dissolved arsenic in the Kangnung Namdae stream. The distribution of As concentrations measured in 28 August (high water flow) and in 21 November 1997 (low water flow) differs from those of other metals measured during the same period; The concentrations of Doam-dam are lower than those of Obong-dam and accumulation in the downstream in the period of low water flow is not pronounced. The As concentration in the downstream under the low water flow is lower than under high water flow, reciprocally to other metals. Freshwater concentrations are comparable with those measured in pristine river and lower than the world average and the diffrence of concentrations measured during two period is minute. Therefore, the As concentrations in the Namdae stream are background level and the source of As contamination does not exist. In the mixing zone between the freshwater and Donghae seawater, As behave conservatively, indicating the absence of any significant removal or mobilization processes. A first estimation of total dissolved As input from Namdae stream to Donghae coastal sea shows 65.12 kg/yr.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.257-265
• /
• 2008

Nanotechnology is emerging as one of the key technologies of the 21 st century and is expected to enable one to broaden the applicability across a wide range of sectors that can benefit public and improve industrial competitiveness. Already, consumer products containing nanomaterials are available in markets including coatings, computers, clothing, cosmetics, sports equipment and medical devices. Recently, Institute of Occupational Medicine in UK reported an occupational hygiene review for nanoparticles in the viewpoint of nanotoxicity. They reported that the exposure control is very important issues in workplace for exposure assessment, but no proper methods are available to measure the extent of exposures to nanoparticles in the workplace. Therefore, for the estimation of exposure of nanomaterials, we have to approach the material-balance methodology, which similarly carried out in TRI (toxic release inventory) for hazardous chemicals. In order to use this methodology, the exposure source of nanomaterials should be determined firstly. Therefore, herein we investigated the main sources and processes for the exposure to nanomaterals by conducting the survey. The results could be used to define and assess nanohazard sources.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.10-17
• /
• 2008

The objective of this study was to estimate the pollutant loads from paddy fields by cultivation practices using a non-point-sources models. One of them is CREAMS-PADDY model that was developed considering the water balance and mass balance of paddy fields. The CREAMS-PADDY model was applied to provide basic data to reduce runoff loadings under various scenarios such as various water management control and various fertilizer condition. The model was verified against T-N, T-P and runoff flow data collected during cropping periods at 2000. The model results agreed well with the measured data in verification. The results showed that the model could be used for estimating the runoff loadings from irrigated paddy fields by cultivation practices was possible. Comparison of simulated the standard height and the sluice management of T-N and T-P runoff loadings from paddy fields were +32.4%, +10.3% in 10 mm below the standard height, -29.2%, -35.9% in 20 mm above the standard height, 52.6%, 59.0% in 40 mm above the standard height, respectively. Comparison of simulated the standard fertilizer and the fertilizer control of T-N and T-P runoff loadings from paddy fields were -1.3%, -21.7%in reduction of conventional fertilizer 30%, -1.0%, -12.5% in reduction of standard fertilizer 30%, respectively. Therefore, reducing nonpoint-sources nutrient loading by reducing fertilization may not work well in the range of normal paddy rice farming practices, and instead it could be achieved by reducing surface drainage outflow.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.145-150
• /
• 2013

A film colored overlay has been used as an assistive device for dyslexics, Recently, several virtual colored overlays which can be used in computer were developed. But mobile virtual overlay has not been developed yet. In this paper, I implemented a mobile overlay application which is based android operating system and displays a colored overlay of screen all the time while user can freely interact with rest of apps in normal manner by using root window and service. A method is presented to determine the source color of a virtual overlays by estimating alpha value of alpha blending algorithm through measurement of the chromaticity and transmissivity of film overlays and I implemented all colors which are presented by using Intuitive Overlays. Test results of the developed virtual overlay show that all colors of the overlays are almost identical to the colors of Intuitive Overlay by using the chroma meter CS-200A.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.107-110
• /
• 1999

18 boreholes with nitrate contaminated were selected. Samples were collected 4 times between both 1995 and 1996. Stable nitrogen isotope ratio for them all was measured and the contribution to contamination from several sources like fertilizer, sewage, cropland. and landfill was analysed. Nitrogen source for 11 sampling sites of T-3, L-1. O-1∼O-4, F-2∼F-5, and G-2 considered to come from chemical fertilizer and its contribution was around 60% or more. T-4. T-5 were located downward the downtown, which were influenced bydomestic sewage and its contribution were 70.7% and 54.7%. Nitrate concentration of G-2 was 17.7 mg/L, among which 60.7% was estimated to come from landfill leachate. T-1 and T-2 were located in the small village, in which 42.2 and 43.4% of nitrogen was to come from domestic sewage but 52.8% and 56.0% were from fertilizer sprayed in the cropland. L-2 was near livestock by which it was estimated to be influenced, in which 59.9% of nitrogen was from cropland. F-1 was in the cropland, by which 50.0% was influenced and 49.5% was estimated from organic matter of animals.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.490-497
• /
• 2007

A Combined sewer overflows (CSOs) are themselves a significant source of water pollution. Therefore, the control of urban drainage for CSOs reduction and receiving water quality protection is needed. Examples in combined sewer systems include downstream storage facilities that detain runoff during periods of high flow and allow the detained water to be conveyed by an interceptor sewer to a centralized treatment plant during periods of low flow. The design of such facilities as stormwater detention storage is highly dependant on the temporal variability of storage capacity available (which is influenced by the duration of interevent dry periods) as well as the infiltration capacity of soil and recovery of depression storage. As a result, a continuous approach is required to adequately size such facilities. This study for the continuous long-term analysis of urban drainage system used analytical probabilistic model based on derived probability distribution theory. As an alternative to the modeling of urban drainage system for planning or screening level analysis of runoff control alternatives, this model have evolved that offer much ease and flexibility in terms of computation while considering long-term meteorology. This study presented rainfall and runoff characteristics of the subject area using analytical probabilistic model. This study presented the average annual COSs and number of COSs when the interceptor capacity is in the range $3{\times}DWF$ (dry weather flow). Also, calculated the average annual mass of pollutant lost in CSOs using Event Mean Concentration. Finally, this study presented a decision of storage volume for CSOs reduction and water quality protection.