• Journal of The Korean Astronomical Society
• /
• v.54 no.6
• /
• pp.171-182
• /
• 2021

The lack of short baselines, referred to as the short-spacing problem (SSP), is a well-known limitation of the performance of radio interferometers, causing a reduction of the flux detected from source structure on large angular scales. The very large number of antennas operated in the Atacama Large Millimeter/sub-millimeter Array (ALMA) generates situations for which the impact of the SSP takes a complex form, not simply measurable by a single number, such as the maximal recoverable scale. In particular, extended antenna configurations, complemented by a small group of closeby antennas at the centre of the array, may result in a double-humped baseline distribution with a significant gap between the two groups. In such cases one should adopt as the effective maximal recoverable scale the one associated with the extended array and use only the central array to recover missing flux, as one would do with single dish or ACA (Atacama Compact Array) observations. The impact of the missing baselines can be very important and may easily be underestimated, or even overlooked. The present study uses ALMA archival data of the ²⁹SiO(8-7) line emission of the AGB star W Hydrae for a demonstration. A critical discussion of the reliability of the observations away from the star is presented together with comments of a broader scope. Properties of the circumstellar envelope of W Hya within ~15 au from the star, many of which are not mentioned in the published literature, are briefly described and compared with R Doradus, an AGB star having properties very similar to W Hya.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.291-298
• /
• 2015

An array type probe for monitoring metal tubes is proposed in this paper which utilizes peak value and peak time of a pulsed eddy current(PEC) signal. The probe consists of an array of encircling coils along a tube and the outside of coils is shielded by ferrite to prevent source magnetic fields from directly affecting sensor signals since it is the magnetic fields produced by eddy currents that reflect the condition of metal tubes. The positions of both exciter and sensor coils are consecutively moved automatically so that manual scanning is not necessary. At one position of send-receive coils, peak value and peak time are extracted from a sensor PEC signal and these data are accumulated for all positions to form an array type peak value signal and an array type peak time signal. Numerical simulation was performed using the backward difference method in time and the finite element method for spatial analysis. Simulation results showed that peak value increases and the peak appears earlier as the defect depth or length increases. The proposed array signals are shown to be excellent in reflecting the defect location as well as variations of defect depth and length within the array probe.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2
• /
• pp.87-96
• /
• 2005

In matched field processing (MEP), the observed acoustic field data is basically correlated with the replica produced by the modeling. therefore the results of source localization and correlation is limited by the mismatch of the environment and sensor location. In this paper. the effects of mismatch in environment and system on the bias in estimating the source location are investigated in the context of source localization. In the Pekeris waveguide, the simulation shows that the mismatches in environment and system, can cause a significant biases in the source localization and a degradation in MFP correlation. Mismatch caused by uncertainties in array tilt and depth, bottom depth, bottom sound speed, etc. causes degradation in source localization performance.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.100-105
• /
• 1997

To analyze the multipath propagation effects on the source bearing detection of HLA(Horizontal Line Array), the conversion mechanism of the multipath into the bearing is described, and the bearing is estimated from the multipath modeled with typical sound velocity structures of the East and the South Sea of Korea. The erroneous bearing is observed from the beamforming outputs simulated with the modeled multipath, and the erroneous phenomena are analyzed. In case of the East Sea, since the multipath propagation with a high receiving angle occurs due to strong inverse slope of the sound velocity structure, it is possible that the estimated source bearing is different from the real source bearing, and that the number of the source is misrecognized.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5087-5102
• /
• 2015

Rapid popularization of smart cell phone equipped with camera has led to a number of new legal and criminal problems related to multimedia such as digital image, which makes cell phone source identification an important branch of digital image forensics. This paper proposes a classifier combination based source identification strategy for cell phone images. To identify the outlier cell phone models of the training sets in multi-class classifier, a one-class classifier is orderly used in the framework. Feature vectors including color filter array (CFA) interpolation coefficients estimation and multi-feature fusion is employed to verify the effectiveness of the classifier combination strategy. Experimental results demonstrate that for different feature sets, our method presents high accuracy of source identification both for the cell phone in the training sets and the outliers.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.107-116
• /
• 1996

Recently, the flash memory has been abstracting great attention in the semiconductor market in the world because of its potential applications as mass storage devices. One of the most significant barriers to the scalling-down of the stacked-gate devices such as EPROM's and flash EEPROM's is the large subthreshold leakage in the unselected cells connected with the bit line of a selected cell in the array during programming. The large subthreshold leakge is majorly due to the capacitive coupling between the floating gates of the unselectd cells and the bit line of selected cell. In this paper, a new programming method to redcue significantly the drain turn-on leakage in the unselected cells during programming has been studied, where a little positive voltage (0.25-0.75V) is applied to the soruce during programming unlike the conventional programming method in which the source is grounded. The resutls of the PISCES simulations and the electrical measurements for the standard EPROM with 0.35.mu.m effective channel length and 1.0.mu.m effective channel width show that the subthreshold leakage in the unselectd cells is significantly large when the source is grounded, whereas it is negligibly small when the source is biased ot a little positive voltage during programming. On the other hadn, the positive bias on the source is found to have little effects on the programming speed of the EPROM.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2012

In this study, a high performance rotary magnet type magnetron source for roll-to-roll sputter system has been developed. We analyzed the density of magnetic field as a function of size variation of the magnet which are in the center and edge of the target. The target efficiency showed the best result when the width of center magnet, the width of edge magnet, the angle of edge magnet, and the rotation angle of Yoke are 20mm, 10mm, $56^{\circ}$, and $16^{\circ}$, respectively. On the basis of the results of magnet array, Roll-to Roll magnetron source was fabricated and tested. The uniformity of the film thickness and that of the sheet resistance was ${\pm}1.62%$ and ${\pm}4.13%$, and the resistivity was $2.79{\times}10^{-3}W{\cdot}cm$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.57-63
• /
• 2007

In this paper, a new approach to the optimum synthesis of line source difference patterns is proposed for the monopulse tracking way antennas. In the Proposed scheme, which is different from the well-known Bayliss difference pattern synthesis, the difference patterns with the desired individual sidelobe levels are optimally synthesized by appropriately modifying the Taylor line source sum pattern formula. That is, the relationship between the difference pattern and the corresponding source distribution function is analytically established, and then the desired pattern and the distribution are simultaneously extracted by the optimum perturbation of pattern null positions. Furthermore this method provides more rapid sidelobe decay rates than conventional methods. Some numerical results show the validity and usefulness of the proposed procedures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.35-38
• /
• 2002

In this paper, the characteristics of channel hot electron (CHE) injection for the write operation in a NOR-type SONOS flash memory with common source line were investigated. The thicknesses of he tunnel oxide, the memory nitride， and the blocking oxide layers for the gate insulator of the fabricated SONOS devices were $34{\AA}$, $73{\AA}$, and $34{\AA}$, respectively. The SONOS devices compared to floating gate devices have many advantages, which are a simpler cell structure, compatibility with conventional logic CMOS process and a superior scalability. For these reasons, the introduction of SONOS device has stimulated. In the conventional SONOS devices, Modified Folwer-Nordheim (MFN) tunneling and CHE injection for writing require high voltages, which are typically in the range of 9 V to 15 V. However CHE injection in our devices was achieved with the single power supply of 5 V. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve were investigated. The memory window of about 3.2 V and the write speed of $100{\mu}s$ were obtained. Also, the disturbance and drain turn-on leakage during CHE injection were not affected in the SONOS array. These results show that CHE injection can be achieved with a low voltage and single power supply, and applied for the high speed program of the SONOS memory devices.