• Title/Summary/Keyword: Source Node

Search Result 603, Processing Time 0.024 seconds

A Cooperative Communication System using Cross-Layer Coding Method base on Hybrid-ARQ (Cross-Layer 부호기법을 이용한 Hybrid-ARQ 기반의 협력통신 시스템 연구)

  • Park, Tae-Doo;Kim, Min-Hyuk;Kim, Chul-Seung;Jung, Ji-Won
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.11C
    • /
    • pp.889-895
    • /
    • 2010
  • MIMO system generally requires more than one antenna at the communication device. However, many wireless devices are limited by size, cost or hardware complexity to one antenna. To overcome such restrictions, we used a new technique, called cooperative communication. We propose a new cooperative transmission strategy system using cross-layer coding method base on H-ARQ for optimal communication. Proposed cooperative H-ARQ system that can improve the above problems and can get the better performance. In proposed cooperative system with H-ARQ method, if the received signal from source node is satisfied by the destination preferentially, the destination transmit ACK message to both relay node and source node, and then recovers the received signal. In addition, if ARQ message indicates NACK message, relay node operates selective retransmission. Based on the simulation results in aspect to BER performance and throughput, the proposed method which combined cooperative system with H-ARQ based on cross-layer coding can improve spectral efficiency reliability of system compared with that of general one by one system.

A Data Ferrying-Based Virtual Full-Duplex Relaying Scheme with Two UAVs (두 UAV를 활용하는 데이터 페리 기반의 가상 전이중 중계전송 기법)

  • Woo, Dong Hyuck;Hwang, Ho Young
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.12
    • /
    • pp.1639-1645
    • /
    • 2020
  • In this paper, we propose a virtual full-duplex relaying scheme based on data ferrying using two unmanned aerial vehicles (UAVs). By utilizing high mobility of two UAVs, the proposed relaying scheme can make each UAV communicate with a source node or a destination node when the UAV is near the source node or the destination node. The proposed relaying scheme can overcome the performance limitations of the half-duplex relaying and the implementation constraints of the full-duplex relaying. In addition, we propose an algorithm to shift the center point of two UAVs' trajectory with consideration of inter-relay interference (IRI). We show the simulation results of our proposed trajectory's center point shift algorithm. From the simulation results, it is shown that our proposed relaying scheme can achieve higher end-to-end spectral efficiency (SE) than the conventional static relaying scheme.

Multi channel reservation scheme for underwater sensor network (수중 센서 네트워크에서 다중 채널 예약방법)

  • Lee, Dong-Won;Kim, Sun-Myeng
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2011.05a
    • /
    • pp.336-339
    • /
    • 2011
  • In the RTLS(Real Time Location Based System), in case of existing a number of moving target, extremely complecated data flow is can be occurred. In the network where single gateway exists, various data which was collected from sensor node is transmitted along the simple route as time goes by. In case of multi-gateway configuration, the collected data is transmitted through diverse routes rather than simple route. This kind of data causes jams on nodes and this brings down the performance of the network. Different from existing studies, in this thesis, MAC (Media Access Control) protocol which minimizes data collision between nodes and guarantees QoS(Quality of Service) is suggested, in order to communicate efficiently in multi-gateway underwater sensor network environment. In the suggested protocol, source node which wants to transmit data makes a channel reservation to a number of destination node using a RTS packet. Source node reserves a channel without collision, by scheduling CTS response time using expected delay information from neighbor nodes. Once the reservation is made, source node transmit data packet without collision. This protocol analyzes/estimates the performance compared to a method provided from existing studies via simulation. As a results of the analysis, it was comfirmed that the suggested method has better performance, such as efficiency and delay.

  • PDF

A Route Stability-based Direction Guided Routing Protocol in Mobile Ad-hoc Wireless Networks (모바일 Ad-hoc 무선 네트워크에서 경로 안정성 기반 방향성 안내 라우팅 프로토콜)

  • Ha, Suehyung;Le, The Dung;An, Beongku
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.12 no.6
    • /
    • pp.257-264
    • /
    • 2012
  • In this paper, we propose a Route Stability-based Direction Guided Routing protocol(RSDGR) in mobile ad-hoc wireless networks. The main features and contributions of the proposed routing protocol are as follows. First, it can calculate link stability between two nodes as well as route stability of multi hop quantitatively by using nodes' mobility. And this protocol can establish the most stable path between a source node and a destination node. Second, according to the route stability between a source node and a destination node, it can control and optimize the direction guided region dynamically for route setup. Third, we suggest theoretical model for quantitative calculation of link stability between two nodes and route stability of multi hop path. The performance evaluation of the proposed routing protocol is performed by simulation using OPNET(Optimized Network Engineering Tool) and theoretical analysis. The results of performance evaluation show that the patterns of PDR are similar in simulation and analysis according to route stability. The faster mobile nodes' velocity and the smaller source node's direct guided reigion, the lower route stability and PDR and the higher delay and control overhead related to this.

Improving TCP Performance through Pre-detection of Route Failure in Mobile Ad Hoc Networks (Ad Hoc 망에서 경로단절 사전감지를 통한 TCP 성능향상)

  • Lee Byoung-Yeul;Lim Jae-Sung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.11B
    • /
    • pp.900-910
    • /
    • 2004
  • Route failure is mainly caused by mobility of mobile host in ad hoc networks. Route failure, which may lead to sudden packet losses and delays, is losing the route from source to destination. In this situation, TCP assumes that congestion has occurred within the network and also initiates the congestion control procedures. Congestion control algorithm provides the means for the source to deal with lost packets. TCP performance in ad hoc environments will be degraded as TCP source cannot distinguish congestion from route failure. In this paper, we propose TCP-P as pre-detection approach to deal with route failure. TCP-P freezes TCP through pre-detection of route failure. Route failure information of the proposed mechanism is obtained not by routing protocol but by MAC protocol. The intermediated node, obtaining route failure information by its MAC layer, relays the information to TCP source and lets TCP source stop the congestion control algorithm. Results reveal that TCP-P responding with proactive manner outperforms other approaches in terms of communication throughput under the presence of node mobility.

A Point-to-Multipoint Routing Path Selection Algorithm for Dynamic Routing Based ATM Network (동적 라우팅기반의 점대다중점 라우팅 경로 선택)

  • 신현순;이상호;이경호;박권철
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.8A
    • /
    • pp.581-590
    • /
    • 2003
  • This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

A Sinkhole Detection Method based on Incremental Learning in Wireless Ad Hoc Networks

  • Kim, Ki-Sung;Kim, Se-Hun
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2007.11a
    • /
    • pp.377-382
    • /
    • 2007
  • Mobile ad hoc network(MANET) is a kind of wireless network which has no infrastructure. Each component node of MANET can move freely and communicate based on wireless peer to peer mode. Because of its vulnerable routing protocols, MANET is exposed to many kinds of attacks. A sinkhole attack is one of the representative attacks in MANET caused by attempts to draw all network traffic to a sinkhole node. This paper focuses on the sinkhole problem on Dynamic Source Routing(DSR) protocol in MANET. To detect the sinkhole node, we extract several useful sinkhole indicators through analyzing the sinkhole problem, then propose an efficient detection method based on an incremental learning algorithm. The simulation results show that the proposed method is effective and reliable for detecting sinkhole intrusion.

  • PDF

Simple Relay Selection for Wireless Network Coding System

  • Kim, Jang-Seob;Lee, Jung-Woo
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2011.07a
    • /
    • pp.310-313
    • /
    • 2011
  • Broadcasting nature of wireless communications makes it possible to apply opportunistic network coding (OPNC) by overhearing transmitted packets from a source to sink nodes. However, it is difficult to apply network coding to the topology of multiple relay and sink nodes. We propose to use relay node selection, which finds a proper node for network coding since the OPNC alone in the topology of multiple relays and sink nodes cannot guarantee network coding gain. The proposed system is a novel combination of wireless network coding and relay selection, which is a key contribution of this paper. In this paper, with the consideration of channel state and potential network coding gain, we propose relay node selection techniques, and show performance gain over the conventional OPNC and a channel-based selection algorithm in terms of average system throughput.

  • PDF

An enhanced unicast of ODMRP scheme for Ad-hoc Networks (Ad-hoc 망에서 유니캐스트 성능 향상을 위한 개선된 ODMRP)

  • 백경호;박재우;이제원;이균하
    • Proceedings of the IEEK Conference
    • /
    • 2003.07a
    • /
    • pp.157-160
    • /
    • 2003
  • ODMRP is protocol that support multicast and unicast in Ad-hoc network. When some one node must transmit data by unicast way in this ODMRP, must pass through periodic flooding process to find a path and overhead happens thereby. Our scheme stores the found path into the table in a unicast mode and, when the node sends data, it refers to the DR FG table so that reduces the traffic caused by control packets(JOIN QUERY, JOIN REPLY) of a receiver node, while source/destination nodes flood periodic control packets to look for a path in ODMRP. We present that our scheme is much more improved on the time of looking for a path than existing ODMRP methods by means of the simulation.

  • PDF

Cluster-Based Quantization and Estimation for Distributed Systems

  • Kim, Yoon Hak
    • Journal of information and communication convergence engineering
    • /
    • v.14 no.4
    • /
    • pp.215-221
    • /
    • 2016
  • We consider a design of a combined quantizer and estimator for distributed systems wherein each node quantizes its measurement without any communication among the nodes and transmits it to a fusion node for estimation. Noting that the quantization partitions minimizing the estimation error are not independently encoded at nodes, we focus on the parameter regions created by the partitions and propose a cluster-based quantization algorithm that iteratively finds a given number of clusters of parameter regions with each region being closer to the corresponding codeword than to the other codewords. We introduce a new metric to determine the distance between codewords and parameter regions. We also discuss that the fusion node can perform an efficient estimation by finding the intersection of the clusters sent from the nodes. We demonstrate through experiments that the proposed design achieves a significant performance gain with a low complexity as compared to the previous designs.