• Journal of Environmental Science International
• /
• v.16 no.3
• /
• pp.299-310
• /
• 2007

It will be necessary to make proper management plans to preserve the air quality in good level for the public. In order to make these plans, source information and detail emission inventories of the city and near industrial areas should be given. However, lack of the source measurements data makes us more difficult to complete the source inventory. VOC source Inventory could be utilized for the feasibility study to estimate the contribution of VOC sources presenting to the receptor such as residential area. It may give policy maker an idea how to control the air quality, and improve their social environment in the area. This study shows data that measured VOCs concentrations from the local industrial areas in Jeonju during from May 2005 to January 2006. The samples were collected from the near sources in 7 major factories in the industrial park as well as 5 general sources in near city Jeonju area to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; chemical, food, paper, wood, metal, non-metal (glass), and painting (coating) industries. The 5 general sources are sampled from tunnel, gasoline gas station, dry cleaning shop, printing (copy) shop, and road pavement working place in urban area. To understand the near source effect at receptor, samples from the 2 receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected and analyzed for the comparison to source concentration. The mass contributions of the speciated VOC to total mass of VOCs measured from the different sources and ambient (2 receptors) were presented and discussed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.27-37
• /
• 2007

Downhole seismic method is very economic and easy to operate because it uses only one borehole and simple surface source to obtain the shear wave velocity profile of a site. In this study, automatic shear wave source was developed for efficient downhole seismic testing. This source is motor-spring type and easy to control. It can lessen the labor of operator and the working time. Moreover, it can provide better and repetitive signals for data interpretation. By combining developed automatic source with automatic receiver system, PC based data acquisition system, advanced managing program, and semi-automatic downhole performing system were constructed. Through comparison test with manual source, advantages of automatic source were verified. Constructed semi-automatic downhole testing system including automatic shear wave source was applied to the soft soil site. The applicability and reliability were verified and the importance of automating testing system for obtaining reliable result was emphasized.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.736-743
• /
• 2021

Due to COVID-19, the non-face-to-face content market is growing rapidly. However, most of the non-face-to-face content such as webtoons and web novels are produced based on the traditional culture of other countries, not Korean traditional culture. The biggest cause of this situation is the lack of reference materials for creating based on Korean traditional culture. Therefore, the need for materials on traditional Korean culture that can be used for content creation is emerging. In this paper, we propose a generation model of source data based on traditional folk paintings through the fusion of traditional Korean folk paintings and AI technology. The proposed model secures basic data based on folk tales, analyzes the style and characteristics of folk tales, and converts historical backgrounds and various stories related to folk tales into data. In addition, using the built data, various new stories are created based on AI technology. The proposed model is highly utilized in that it provides a foundation for new creation based on Korean traditional folk painting and AI technology.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.1
• /
• pp.59-66
• /
• 2013

In this paper, we propose a probabilistic framework for model-based clustering of direction of arrival (DOA) data to obtain stable sound source localization (SSL) estimates. Model-based clustering has been shown capable of handling highly overlapped and noisy datasets, such as those involved in DOA detection. Although the Gaussian mixture model is commonly used for model-based clustering, we propose use of the von Mises mixture model as more befitting circular DOA data than a Gaussian distribution. The EM framework for the von Mises mixture model in a unit hyper sphere is degenerated for the 2D case and used as such in the proposed method. We also use a histogram of the dataset to initialize the number of clusters and the initial values of parameters, thereby saving calculation time and improving the efficiency. Experiments using simulated and real-world datasets demonstrate the performance of the proposed method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1093-1102
• /
• 2009

This study was focused on analyse Nonpoint source characteristics from Flat slope field and Steep slope field. We performed Storm-water monitering for obtain flow data and concentration data. Totally, eleven times Event was occurred. We calculated EMC(Event Mean Concentration) and Pollutants Loads using data we obtained. As a result, steep slope field has more discharge than flat field. SS value, one of the water quality contents, has largest variation and T-N has least variation. There is runoff differences even though events has same rainfall. We assume that not only amount of Rainfall, but also Rainfall Duration Times, Intensity, Number of Previous Non-precipitation days can affect to Run-off.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.41-47
• /
• 1997

A geographical resource analysis support system (GRASS) was incorporated to an input and output processor for the agricultural nonpoint source pollution (AGNPS) model. The resulting interface system, GIS-AGNPS was a user-friendly, menu-driven system. GIS-AGNPS was developed to automatically process the input and output data from GIS-based data using GRASS and Motif routines. GIS-AGNPS was consisted of GISAGIN which was an input processor for the AGNPS model, GISAGOUT a output processor for the AGNPS and management submodel. The system defines an input data set for AGNPS from attributes of basic and thematic maps. It also provides with editing modes so that users can adjust and detail the values for selected input parameters, if needed. The post-processor at the system displays graphically the outputs from AGNPS, which may he used to identify areas significantly contributing nonpoint source pollution loads.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1374-1382
• /
• 1995

In TFT-LCDs, as the display size area becomes larger, and the resolution higher, we have to consider the image degradation effects due to the incorporation of the TFT-LCD parameters such as the data-line resistance, the common electrode resistance, the data-line to common parasitic capacitance, and the output characteristics of driver ICs. One of the degradation effects is crosstalk resulting from the coupling between the source bus-line and common electrode. Since a source signal which represents a large number of display data is supposed to vary frequently, the common signal level is affected through the coupling effect, resulting in the degradation of nearby pixel drive signals. Therefore, we proposed a method to compensate for this source-common electrode coupling effect, we also designed and experimented the feasibility of our crosstalk compensation circuit in the actual TFT-LCD. We saw that the newly designed compensation circuit greatly reduced the crosstalk in display pattern image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.193-195
• /
• 2009

Bluetooth is a popluar wireless data transmission method with low power consumption. In this paper, we present a open source based player of video stream encoded by H.264 codec, which is transmitted via Bluetooth. An open source JM is used for H.264 decoding and modified for reading H.264 encoded data via Bluetooth. For display of decoded video data, SDL was utilized.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.70-77
• /
• 2020

In this study, we estimate the vehicle speed by analyzing the acoustic data recorded in a single microphone of a surveillance camera. The frequency analysis of the acoustic data corrects the Doppler effect, which is a characteristic of the moving sound source, and reflects the geometric relationship according to the location of the sound source and the microphone on the two-dimensional plane. The acoustic data is selected from the horn sound that is mainly observed in an urgent situation among various sound sources that may occur in a traffic accident, and the characteristics of the monotone source are considered. We verified the reliability of the proposed method by time domain acoustic analysis and actual vehicle evaluation. This method is effective and can be used for traffic accident analysis in the blind spot of the camera using a single microphone built into the existing surveillance camera.