• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.9-17
• /
• 2014

Several studies have been carried out on the source contribution of the particulate Polycyclic Aromatic Hydrocarbons (PAHs) over Seoul by using the Chemical Mass Balance Model (CMB)(Lee and Kim, 2007; Kim et al., 2013). To confirm the validity of the modeling results, the modified model employing a photochemical loss rate along with varying residence times and the standard model that considers no loss were compared. It was found that by considering the photochemical loss rate, a better performance was obtained as compared to those obtained from the standard model in the CMB calculation. The modified model estimated higher contributions from coke oven, transportation, and biomass burning by 4 to 8%. However, the order of the relative importance of major sources was not changed, coke oven followed by transportation and biomass burning. Thus, it was concluded that the standard CMB model results are reliable for identifying the relative importance of major sources.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.261-264
• /
• 2003

We try to distribute air pollution sources at target area. The complex method is used to distribute air pollution sources. Most of people, However, want to simple indicator as standard for express air pollution source. In many area, air pollution is caused by different types of sources. The general type is point source, such as tall stack of power plants and oil refineries stacks. A second type is areal source, such as local industry and transportation. In this aspect, the ratio of sulfur dioxide to nitrogen oxides (RSN =SO$_2$/NOx)is an indicator of air pollution source. the role of this ratio is to show the characteristics at target area of the relationship the point and the areal source. (omitted)

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.789-803
• /
• 2003

The purpose of this study is to compare the usefulness between Gaussian dispersion model and receptor model with the experimental result of the dispersion tracing of the particulate pollutants from Taean coal-fired power plants. For this purpose, the component analysis of the collected PM 10 samples was performed. In order to trace the pollution sources, factor analysis was done with the result of the component analysis. As a result of the correlativity analysis of the fifteen power plants' profiles offered by US EPA, the correlativity of No.11202 source profile showed highest rate up to 84.5%. Thus it was adopted as proper one and the contribution rate by each pollution source was calculated by Chemical Mass Balance (CMB)-8 model. The contribution rate, which was the effect rate of the power plants on each measuring point, were calculated with a range of 24∼52％ and the standard error was below 0.9 $\mu\textrm{g}$/㎥. This indicates the selection of the source profile was appropriate. Also, the concentrations of each point were calculated by the ISCST3 which is suggested by US EPA as one of the regulatory Gaussian dispersion model. The calculation result showed that the predicted concentration was 50∼58 $\mu\textrm{g}$/㎥, comparing with the measured result of 9∼65 $\mu\textrm{g}$/㎥. It was found that the concentration calculated by ISCST3 was underpredicted. It was thought that the receptor model was more favorable than the Gaussian dispersion model in estimating the effect of the particulate matter on a certain receptive point.

• 한국대기환경학회지
• /
• 제24권1호
• /
• pp.30-42
• /
• 2008

In this study, the chemical compositions of $PM_{2.5}$ samples collected at the Redwood National Park IMPROVE site in California from March 1988 to May 2004 were analyzed to provide source identification and apportionment. A total of 1,640 samples were collected and 33 chemical species were analyzed by particle induced X-ray emission, proton elastic scattering analysis, photon induced X-ray fluorescence, ion chromatography, and thermal optical reflectance methods. Positive matrix factorization (PMF) was used to develop source profiles and to estimate their mass contributions. The PMF modeling identified five sources and the average mass was apportioned to motor vehicle (35.8%, $1.58\;{\mu}g/m^3$), aged sea salt (23.2%, $1.02\;{\mu}g/m^3$), fresh sea salt (21.4%, $0.94\;{\mu}g/m^3$), wood/field burning (16.1%, $0.71\;{\mu}g/m^3$), and airborne soil (3.5%, $0.15\;{\mu}g/m^3$), respectively. To analyze local source impacts from various wind directions, the CPF and NPR analyses were performed using source contribution results with the wind direction values measured at the site. These results suggested that sources of $PM_{2.5}$ are also sources of visibility degradation and then source apportionment studies derived for $PM_{2.5}$ are also used for understanding visibility problem.

• 한국응용과학기술학회지
• /
• 제36권3호
• /
• pp.905-914
• /
• 2019

본 연구에서는 PMF 모델을 이용하여 $PM_{2.5}$에 대한 오염원 확인 및 오염원별 기여도를 분석하였다. A시의 배출원별 기여도 순위는 Secondary Sulfate가 19.8%로 가장 기여도가 높고, 그 다음으로는 Mobile 19.5%, Industry 16.0%, Biomass Buring 14.1%, Secondary Nitrate 14.1%, Oil Combustion 11.6%, Aged Sea Salt 2.6%, Soil 2.5% 등으로 분석되었다. Sulfate와 Ammonium 농도가 배출원별 프로파일에서 기여도가 가장 높은 오염원으로 분석되었는데, 이는 대기 중에서 가스상 전구물질(SOx와 암모니아 가스)이 광화학 반응하여 생성된 2차 에어로졸인 것으로 분석되었다.

• 한국응용과학기술학회지
• /
• 제36권3호
• /
• pp.866-875
• /
• 2019

본 연구에서는 CMB(Chemical Mass Balance) 모델을 이용하여 $PM_{2.5}$에 대한 오염원 확인 및 오염원별 기여도를 분석하였다. A시의 배출원별 기여도 순위는 비산먼지(30.1%) > 생물성 연소(21.9%) > 2차 오염물질(21.1%) > 도로이동오염원(19.3%) > 면오염원(7.6%) 순이고, CMB 모델 기여도와 CAPSS(Clean Air Policy Support System) 배출자료 기여도 비교에서 증가한 배출원은 생물성 연소와 2차 오염물질이고, 감소한 배출원은 도로이동오염원, 비산먼지, 면오염원으로 분석되었다.

• 소음진동
• /
• 제8권3호
• /
• pp.542-552
• /
• 1998

The noise sources, structure-borne and/or air-borne, in machinery can be defined by their locations and strengths. However the locations of that noise sources are well known in many cases. In those cases, the problem can be defined as an inverse problem to known the strengths of the noise sources in the frequency domain, the modeling scheme is classified by thecoherent or incoherent source. This paper expands the basic concept to the case of the complex noise sources, in which the set of coherent and incoherent noise sources are matched with the noise of a real vehicle. The error factors in the experiment and the optimal number of the monopole sources to match the real suond filed are also investigated. The results of the noise source modeling of heavy machinery show that the incoherent and coherent/incoherent source models are applicable to the high frequency and the low frequency region, respectively. The noise source model also enables the noise source analysis to rank the contribution of real source group such as engine, T/M, exhuast, etc.

• 환경위생공학
• /
• 제20권3호
• /
• pp.17-26
• /
• 2005

Many researches were focused on the data which obtained from chemical bulk analysis. It is difficult to evaluate source contribution by wet type chemical bulk analysis. In this study, we have reviewed the characterization of individual particle for source identification. We analyzed by SEM/EDX methods. We have obtained average geometric particle diameter measured by optical diameter which were resulted from SEM/EDX image scan, representative physical diameter of individual particle was $3.38\;{\mu}m\;in\;A,\;3.67\;{\mu}m\;in\;B$. In the result of image analysis at each spots particles, both samples non-sphere shapes, C-rich particles. In consequence of chemical analysis of individual particle, each sampling sites some elements.

• 농업과학연구
• /
• 제31권2호
• /
• pp.135-148
• /
• 2004

Rice is not only main food but also key farm income source of Korean farmers. In spite of the above facts, rice productivity was decreased on account of drought in every 2 or 3 years interval owing to the vulnerability of irrigation facilities throughout Korea in the past decades. As an context of the first five year economic development plan, all weather farming programme including 4 big river basin comprehensive development projects and large and medium sized irrigation water development projects were carried out successfully. Therefore the area of irrigated paddy were increased from 58% in 1970 to 76.2% in 1999. In the past decades, the Government had invested heavy financial funds to develop irrigation water but as an factor share analysis, the contribution rates of irrigation water and investment for farmland base development project have not been identified yet in national agricultural economic level. It is very scarce to find out the papers concerned to macro-economic factor share analysis or contribution rates of water and investment cost to rice production value in Korea considering the production function of the quantity of irrigation water and investment cost as independent variables. Accordingly this paper covered and aimed at identifying (1) derivation of rice production function with the time serial data from 1965 to 1999 and the contribution rates of irrigation water and total investment cost for farmland base development project. The analytical model of the contribution rates was adapted the famous Cobb-Douglass production function. According to the model analysis, the contribution rate of irrigation water to rice production in Korea was shown 37.8% which was equivalent to 0.28 of the production elasticity of water. The contribution rate of farmland base development project cost was revealed 22% and direct production cost of rice was contributed 60% in the growth of rice production and farm mechanization costs contributed to 18% of it respectively. The two contribution rates comparing with the direct production cost were small but without irrigation water and farmland base development, application of high-pay off inputs and farm mechanization might be impossible. Considering the food security and to cope with the frequent drought, rice farming and investment for the irrigation water development should be continued even in WTO system.

• The Journal of the Acoustical Society of Korea
• /
• 제21권4E호
• /
• pp.146-155
• /
• 2002

We present a new technique for achieving source separation when given only a single charmel recording. The main idea is based on exploiting the inherent time structure of sound sources by learning a priori sets of time-domain basis functions that encode the sources in a statistically efficient manner. We derive a learning algorithm using a maximum likelihood approach given the observed single charmel data and sets of basis functions. For each time point we infer the source parameters and their contribution factors. This inference is possible due to the prior knowledge of the basis functions and the associated coefficient densities. A flexible model for density estimation allows accurate modeling of the observation, and our experimental results exhibit a high level of separation performance for simulated mixtures as well as real environment recordings employing mixtures of two different sources. We show separation results of two music signals as well as the separation of two voice signals.