• Korean Journal of Community Nutrition
• /
• v.25 no.2
• /
• pp.150-158
• /
• 2020

Objectives: This study was conducted to estimate usual meat intake distribution, which may have been over/underestimated when estimations were made using only the third food codes of the Korea National Health and Nutrition Examination Survey (KNHANES). Methods: For this purpose, 24-hour recall data from the 2009 Korea National Health and Nutrition Examination Survey, which conducted a partial 2-day survey of food intake, were used. The Multiple Source Method (MSM) was used to estimate the distribution of the usual intake of red and processed meats. Results: The results of this study show that the mean intake of red meat was 45.07 g while that of processed meat was 4.33 g. These results are slightly higher than the consumption calculated using only tertiary food code, and the difference was statistically significant. Furthermore, characteristics of the estimated usual intake distribution were a smaller standard deviation, increased lower percentiles, and decreased upper percentiles compared to the 2-day mean intake distribution for both red and processed meats. The proportion of individuals not consuming red meat decreased substantially from approximately 37% to 0.7%. The proportion of consumption that exceeded 90 g, which is the upper limit of red meat intake recommended by the National Health Service (NHS), was only approximately 10% in the distribution of usual intake. Conclusions: As the consumption of processed foods is expected to continuously increase, caution is needed regarding the processes used to calculate food (group) intake to avoid over/underestimation. Moreover, use of KNHANES data to calculate the proportion of the population at risk of insufficiency or excess intake of certain nutrients or food (group), based on one day intake that does not address within-individual variation, may lead to biased estimates.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.838-848
• /
• 2013

The Community Multiscale Air Quality (CMAQ) model is capable of providing high quality atmospheric chemistry profiles through the utilization of high-resolution meteorology and emissions data. However, it cannot simulate air quality accurately if input data are not appropriate and reliable. One of the most important inputs required by CMAQ is the air pollutants emissions, which determines air pollutants concentrations during the simulation. For the CMAQ simulation of Korean peninsula, we, in general, use the Korean National Emission Inventory data which are estimated by Clean Air Policy Support System (CAPSS). However, since they are not provided by model-ready emission data, we should convert CAPSS emissions into model-ready data. The SMOKE is the emission model we used in this study to generate CMAQ-ready emissions. Because processing the emissions data is very monotonous and tedious work, we have developed CAPSS2SMOKE program to convert CAPSS emissions into SMOKE-ready data with ease and effective. CAPSS2SMOKE program consists of many codes and routines such as source classification code, $PM_{10}$ to $PM_{2.5}$ ratio code, map projection conversion routine, spatial allocation routine, and so on. To verify the CAPSS2SMOKE program, we have run SMOKE using the CAPSS 2009 emissions and found that the SMOKE results inherits CAPSS emissions quite well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1265-1274
• /
• 2009

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Spring Framework 2.0 and 2.5. Spring Framework is a known successful open source standard model for lightweight container architecture. However, there is no comparison research about the performance of Spring Framework 2.0 and 2.5 with same identical platform. Quantitative analysis is supported as a part of LoC(Line of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of the software. This work proposes an specific index for evaluating the productivity of new version Spring Framework on a platform. Base on the result, the specific guidance of the developing software is obtained.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1337-1345
• /
• 2007

The present study is a basic investigation for systematically proceeding disaster prevention studying the effect of platform screen door in case of fire at the subway station. In the paper, the characteristics of screen door were surveyed and described. The fully closed platform screen door and the island type of subway station were employed for simulation-study. Numerical simulations of fire driven flow at the subway station with platform screen door were performed with commercial fire CFD code. For analyzing of the effect of platform screen door, the fire simulations with and without the platform screen door were compared. For the fire location, the one is located on the platform and the other case on the railway. The Ultrafast model was taken as fire growth scenario. The maximum heat release rate was 10MW. The propagated time of the heat and smoke to stairs was within 4 minute when the fire is located on the platform. However the heat and smoke propagation was block off by screen door when the fire is located on the railway.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.67-75
• /
• 2014

Methane gas hydrate which is considered energy source for the next generation has an urgent need to develop reliable numerical simulator for coupled THM phenomena in the porous media, to minimize problems arising during the production and optimize production procedures. International collaborations to improve previous numerical codes are in progress, but they still have mismatch in the predicted value and unstable convergence. In this paper, FEM code for fully coupled THM phenomena is developed to analyze methane hydrate dissociation in the porous media. Coupled partial differential equations are derived from four mass balance equations (methane hydrate, soil, water, and hydrate gas), energy balance equation, and force equilibrium equation. Five main variables (displacement, gas saturation, fluid pressure, temperature, and hydrate saturation) are chosen to give higher numerical convergence through trial combinations of variables, and they can analyze the whole region of a phase change in hydrate bearing porous media. The kinetic model is used to predict dissociation of methane hydrate. Developed THM FEM code is applied to the comparative study on a Masuda's laboratory experiment for the hydrate production, and verified for the stability and convergence.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.37-47
• /
• 2013

Recently, lots of research results on program comparison have been reported since the code theft become frequent as the increase of code mobility. This paper proposes a plagiarism detection method using class structures. The proposed method constructs a graph representing the referential relationship between the member variables and the methods. This relationship is shown as a bipartite graph and the test for graph isomorphism is applied on the set of graphs to measure the similarity of the programs. In order to measure the effectiveness of this method, an experiment was conducted on the test set, the set of Java source codes submitted as solutions for the programming assignments in Object-Oriented Programming course of Pusan National University in 2012. In order to evaluate the accuracy of the proposed method, the F-measure is compared to those of JPlag and Stigmata. According to the experimental result, the F-measure of the proposed method is higher than those of JPlag and Stigmata by 0.17 and 0.34, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.150-160
• /
• 2000

The currently and most widely used client/server architecture is composed of database servers and clients that include both application and presentation logic. To date, due to the rapid growth in WWW, these client/server applications are implemented using Java language, especially in GUI design at client sides and client/server applications development using JDBC. To develop the applications using JDBC, developers should design database schema, code source code for JDBC connection, design report forms to display selected columns from server-side database. In this paper, we propose a development environment based on JavaBeans component for client/server applications development using JDBC. The proposed environment minimizes manual coding and enables developers to develop client/server applications easily with the designed JavaBeans components and their custom property editor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.228-236
• /
• 1995

In this paper the method to evaluate shielding deficiency by gamma scanning test was presented and verified theoretically by Monte Carlo code which is one of the best effective method for radiation shielding calculation. The cylindrical shielding model was selected to evaluate shielding deficiency by gamma scanning test. First, the reference shielding according to the design requirement of cask was fabricated specially and reference values were measured with Co-60 source and scintillation detector. As a result with which calculated the reference values, it is shown that maximum deficiency thickness for lead of true cylindrical shielding model was 12mm. To verify this, thickness of lead was calculated by MCNP code and maximum deficiency thickness was 11.6mm. The experimental result obtained by the use of reference shielding was in good agreement with the theoretical result within 4.1%. So, this method can be applied to inspect the shielding ability for great shielding or cask which the radioactive material is used. To perform measurement more exactly, the further work on the development of measuring equipment to display the results on the screen will be required.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.747-757
• /
• 2010

The ice accreted on the airfoil is one of the critical drivers that causes the degradation of aerodynamic performance as well as aircraft accidents. Hence, an efficient numerical code to predict the accreted ice shape is crucial for the successful design of de-icing and anti-icing devices. To this end, a numerical code has been developed for the prediction of glaze ice accretion shape on 2D airfoil. Constant Source-Doublet method is used for the purpose of computational efficiency and heat transfer in the icing process is accounted for by Messinger model. The computational results are thoroughly compared against available experiments and other computation codes such as LEWICE and TRAJICE. The direction and thickness of ice horn are shown to yield similar results compared to the experiments and other codes. In addition, the effects of various parameters - temperature, free-stream velocity, liquid water contents, and droplet diameter - on the ice shape are systematically analyzed through parametric studies.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.155-160
• /
• 2005

In this paper, the channel decoder promising reliable data retrieving in noisy holographic channel has been developed for holographic WORM(write once read many) system. It covers various DSP(digital signal processing) blocks, such as align mark detector, adaptive channel equalizer, modulation decoder and ECC(error correction code) decoder. The specific schemes of DSP are designed to reduce the effect of noises in holographic WORM(H-WORM) system, particularly in prototype of DAEWOO electronics(DEPROTO). For real time data retrieving, the channel decoder is redesigned for FPGA(field programmable gate array) based hardware, where DSP blocks calculate in parallel sense with memory buffers between blocks and controllers for driving peripherals of FPGA. As an input source of the experiments, MPEG2 TS(transport stream) data was used and recorded to DEPROTO system. During retrieving, the CCD(charge coupled device), capturing device of DEPROTO, detects retrieved images and transmits signals of them to the FPGA of hardware channel decoder. Finally, the output data stream of the channel decoder was transferred to the MPEG decoding board for monitoring video signals. The experimental results showed the error corrected BER(bit error rate) of less than $10^{-9}$, from the raw BER of DEPROTO, about $10^{-3}$. With the developed hardware channel decoder, the real-time video demonstration was possible during the experiments. The operating clock of the FPGA was 60 MHz, of which speed was capable of decoding up to 120 mega channel bits per sec.