• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.39-47
• /
• 2021

Lempel-Ziv coding is one of the most famous source coding schemes. The output of this source coding is usually a non-uniform code, which requires additional source coding, such as arithmetic coding, to reduce a redundancy. However, this additional source code increases complexity and decoding latency. Thus, this paper proposes the optimal maximum a-posteriori (MAP) receiver for non-uniform source non-orthogonal multiple access (NOMA) with symmetric superposition coding (SSC). First, we derive an analytical expression of the bit-error rate (BER) for non-uniform source NOMA with SSC. Then, Monte Carlo simulations demonstrate that the BER of the optimal MAP receiver for the non-uniform source improves slightly, compared to that of the conventional receiver for the uniform source. Moreover, we also show that the BER of an approximate analytical expression is in a good agreement with the BER of Monte Carlo simulation. As a result, the proposed optimal MAP receiver for non-uniform source could be a promising scheme for NOMA with SSC, to reduce complexity and decoding latency due to additional source coding.

• 소음진동
• /
• 제5권2호
• /
• pp.197-206
• /
• 1995

Microphone array is designed to measure the equivalent source height of vehicle noise. The equivalent source position is defined for an arbirary distribution of acoustic sources above a perfectly reflecting plane and a microphone array for its measurement is developed. The normalized errors of the measured equivalent source heights are defined including the effects of background noise, the geometric near field, and source size. Normalized errors of the measured source heights obtained by a nemerical simulation for each parameter lead to optimization of the microphone spacing and to the design of an array which gives the equivalent source height as a function of frequency. The performance of the designed array is verified using the stationary loudspeaker experiments.

• 한국대기환경학회지
• /
• 제13권4호
• /
• pp.285-296
• /
• 1997

The suspended particulate matters had been collected on quartz fiber fiters by a cascade impactor having 9 size stages for 4 years (Sep. 1991 to Dec. 1995) in Kyung Hee University-Suwon Campus. Membrane filters were used to collected the particulate matters on each stage. The weight concentration on each stage was obtained by a microbalance and further chemical element levels were determined by an x-ray fluorescence system. Based on these chemical information, our study focused on applying the target transformation factor analysis (TTFA), a receptor model, to identify aerosol sources and to apportion quantitatively their mass contribution. There are total of 63 ambient data sets. Each data set consists of the 8 size-ranged subdata sets characterized by 16 elemental variables. By the results, four to five sources were extracted from each size range and some sources reappeared in other size ranges. Then total of 8 source profiles were statistically generated from all the ranges, such as oil burning source, soil source, field burning source, gasoline related source, coal burning source, marine source, glass related source, and unknown sources. Apportioning aerosol mass to each source was intensively examined by investigating emission inventories near the study area. The results showed that soil particle source was the most significant contributor. However, coal and oil burning sources were the major anthropogenic ones. The study finally proposed some air quality control strategies to achieve the clean air quality in Suwon area.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.365-373
• /
• 2001

We propose a new channel reservation protocol which can reduce message delay by using a counter for detection of d source conflict in a WDM single-hop network with non-equivalent propagation delay. A source convict occurs when a source node has the right to transmit more than or equal to two messages simultaneously, which are transmitted using different wavelengths. In such a case, the source node has to newly obtain the right to transmit the message. In the proposed protocol, by using a source conflict counter a source node can detect a source conflict before a wave-length assignment is performed. Therefore, the source node can start a procedure to newly obtain the right to transmit the message which cannot be transmitted due to a source conflict. We analyse the throughput performance by taking the effect of a source conflict into account, and show that the approximate analysis and the computer simulated results are close. Also, from computer simulated results, we show that our proposed protocol can reduce mean message delay dramatically without degrading throughput performance as the offered load becomes large.

• 설비공학논문집
• /
• 제25권7호
• /
• pp.386-391
• /
• 2013

The dynamic characteristics of both raw-water source and air source heat pump utilized in water treatment facilities were investigated by using TRNSYS simulator. The modeling of the raw water source heat pump was verified by the measured data at the Cheongju water treatment facility, and the modeling at the air source heat pump was verified by the data from the Siheung water treatment facility. The average heating and cooling COPs from the raw-water source heat pump were higher than those of the air source heat pump by 19% and 18%, respectively. The power consumptions of the air source heat pump for the cooling and the heating were higher than those of the raw water source heat pump by 28% and 26%, respectively.

• 소음진동
• /
• 제8권3호
• /
• pp.542-552
• /
• 1998

The noise sources, structure-borne and/or air-borne, in machinery can be defined by their locations and strengths. However the locations of that noise sources are well known in many cases. In those cases, the problem can be defined as an inverse problem to known the strengths of the noise sources in the frequency domain, the modeling scheme is classified by thecoherent or incoherent source. This paper expands the basic concept to the case of the complex noise sources, in which the set of coherent and incoherent noise sources are matched with the noise of a real vehicle. The error factors in the experiment and the optimal number of the monopole sources to match the real suond filed are also investigated. The results of the noise source modeling of heavy machinery show that the incoherent and coherent/incoherent source models are applicable to the high frequency and the low frequency region, respectively. The noise source model also enables the noise source analysis to rank the contribution of real source group such as engine, T/M, exhuast, etc.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.508-519
• /
• 2015

The objective of this study was to quantitatively estimate $PM_{2.5}$ source contribution in Gyeongsan. Ambient $PM_{2.5}$ samples have been collected on zefluor, quartz and nylasorb filter by $PM_{2.5}$ samplers of cyclone method from September 2010 to December 2012. Collected samples were analyzed for determining 17 inorganic elements, 8 ions, and 8 carbon components after pretreatment. Based on these chemical information, the PMF model was applied to estimate the quantitative contribution of air pollution sources. The results of the PMF modeling showed that the sources were apportioned by biomass burning source (15.5%), secondary sulfate source (16.0%), industry source (10.4%), soil source (7.0%), gasoline source (9.1%), incinerator source (10.4%), diesel emission source (11.0%), and secondary nitrate source (20.6%), respectively. To analyze local source impacts from various wind directions, the CPF analysis were performed using source contribution results with the wind direction values measured at the site.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.893-898
• /
• 1994

In this paper, the influence of voice source estimation and modeling on speech synthesis and coding is examined and then their new estimation and modeling techniques are proposed and verified by computer simulation. It is known that the existing speech synthesizer produced the speech which is dull and inanimated. These problems are arised from the fact that existing estimation and modeling techniques can not give more accurate voice parameters. Therefore, in this paper we propose a new voice source estimation algorithm and modeling techniques which can not give more accurate voice parameters. Therefore, in this paper we propose a new voice source estimation algorithm and modeling techniques which can represent a variety of source characteristics. First, we divide speech samples in one pitch region into four parts having different characteristics. Second, the vocal-tract parameters and voice source waveforms are estimated in each regions differently using sequential SVD. Third, we propose composite source model as a new voice source model which is represented by weighted sum of pre-defined basis functions. And finally, the weights and time-shift parameters of the proposed composite source model are estimeted uning EM(estimate maximize) algorithm. Experimental results indicate that the proposed estimation and modeling methods can estimate more accurate voice source waveforms and represent various source characteristics.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.719-731
• /
• 2003

In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The receptor methods were one of the statistical methods to achieve reasonable air pollution strategies. Also, receptor methods, a field of chemometrics, is based on manifold applied statistics and is a statistical methodology that analyzes the physicochemical properties of gaseous and particulate pollutant on various atmospheric receptors, identifies the sources of air pollutants, and quantifies the apportionment of the sources to the receptors. The objective of this study was 1) after obtaining results from the PMF modeling, the existing sources of air at the study area were qualitatively identified and the contributions of each source were quantitatively estimated as well. 2) finally efficient air pollution management and control strategies of each source were suggested. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols, the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided quantitative source contributions (scaled G matrix) and source profiles (scaled F matrix). The results of the PMF modeling showed that the sources were apportioned by secondary aerosol related source 28.8 ％, soil related source 16.8％, waste incineration source 11.5%, field burning source 11.0%, fossil fuel combustion source 10%, industry related source 8.3％, motor vehicle source 7.9%, oil/coal combustion source 4.4％, non-ferrous metal source 0.3％. and aged sea- salt source 0.2％, respectively.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.538-551
• /
• 2016

방송 제작현장에서는 영상 이미지 표현의 광원으로 Tungsten Halogen 광원이 주 광원으로 사용 되어 왔다. Tungsten Halogen 광원은 그동안 개발된 다른 광원보다 태양광원과 유사한 색 재현성으로 각광받아 왔지만 에너지 효율성의 문제점을 가지고 있었다. 최근 대체 광원으로 고효율의 에너지와 긴 수명의 LED광원이 방송 광원으로 주목받기 시작했다. LED광원은 독특한 발광원리 때문에 카메라를 통한 영상 이미지의 색 재현성과 광원에서 투사되는 빛의 질에 있어서 Tungsten Halogen광원과 다른 특성을 가지고 있다. 이런 특성은 LED광원이 방송 광원으로서 도입이 늦어지는 이유이다. 이에 본 연구에서는 LED 광원의 색 재현성과 빛의 질 특성인 평탄도를 측정하여 기준광원인 Tungsten Halogen과 비교하여 방송 광원으로써의 적합성에 대한 실험 데이터를 제시할 것이다. 또한 LED광원이 방송 광원으로서의 확산되기 위해서 필요한 점이 무엇인지 향후 과제와 기준을 제시하고자 한다.