• 센서학회지
• /
• 제28권5호
• /
• pp.323-328
• /
• 2019

Recently, a sound wave phase meter (SWPM) that can directly measure the pressure waveform of sound waves in free space has been reported, and the development of educational experimental equipment using this meter is in progress. One of the main advantages of using this meter is that wavelengths can be obtained directly from the crests and troughs of the measured pressure waveforms in space without expensive equipment. However, there are times when the measurement wavelength does not exactly match the actual wavelength value, and the pressure waveform differs from the actual shape. This study was conducted to identify and analyze the causes of such errors occurring in SWPM. As a result, it was found that wavelength errors occur when the propagation direction of sound waves and the measurement direction of SWPM do not coincide. It has also been found that an error in the pressure waveform is generated when the induction and sound wave signal outputs from the SWPM interfere with each other to produce a composite signal. We have shown that we can develop educational experimental equipment by suggesting ways to reduce such errors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.275-285
• /
• 1996

A noise measurement method of the multi-sound sources in a reverberation field with wave-guide is developed by experimental method. In the reverberation field, it is very hard to measure sound level or noise spectra of a certain sound source, when many sound sources generate noise simultaneously with a small space between them. Flexible wave-guide(tube) was used to measure noise level in a reverberation field. One end of the tube is attached to a sound source and the other end is closed with an anechoic terminal. Detailed method of the measurement and the source of error was considered as well.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1327-1336
• /
• 2001

The structural modes driven by the low wave-number components of smooth elastic wall pressure provide a relatively weak coupling between the flow and the wall motion. If the elastic thin plate has any resonant mode whose wave-number of resonance coincides with $\omega$/U$\sub$c/, the power will be transmitted to those modes of vibration by the flows. We examine the problem in which the elastic thin plate is subject to pressure fluctuations under turbulent boundary layer. Measurements are presented of the frequency spectra of the near- and far-field pressures and radiated sound contributed by the various wave modes of the thin elastic plate. Dispersion equation for wave motions of elastic plate is used to investigate the effect of bending waves of relatively low wave number on radiated sound. The low wave-number motion of elastic plate is observed to have much less influence on the low-frequency energy of wall pressure fluctuations than that of the rediated sound. High amplitude events of the wall pressure are observed to weakly couple with high-frequency energy of radiated sound for case of low tension applied to the plate. The sound source localization is applied to the measurement of radiated sound by using acoustic mirror system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1399-1400
• /
• 2010

• 감성과학
• /
• 제17권2호
• /
• pp.101-110
• /
• 2014

초음파는 비가청영역에서 나는 사운드이며 일상생활에서는 들을 수 없다. 초음파는 22kHz 이상의 주파수를 말하며 또한 이러한 성분을 초음파 성분 HFCs(High Frequency components)라고 한다. 파도소리는 사람에게 안정감과 알파파를 유도한다고 알려졌는데 이러한 이유는 파도소리에 초음파 성분이 매우 많다는 것이다. 이러한 초음파가 파도소리와 합쳐질 때 쾌감을 주고 알파파 증가와 베타파가 감소하는 초고주파효과(hypersonic effect)라고 한다. 본 실험에서는 파도소리를 들려주면서 동시에 파도소리에 해당되는 초음파부분을 전자회로로 설계하여 인위적으로 파도소리의 초음파 성분과 유사하도록 제작하여 실험하였다. 뇌파는 8채널을 사용하여 Fp1, Fp2, F3, F4, T3, T4, O1, O2 의 총 8개 전극을 부착하였다. 뇌파에서는 집중이나 긴장이완 등이 나타날 때 알파파가 나타나며 각성상태나 긴장상태 그리고 스트레스상태에서는 주로 베타파가 나타난다. 초음파 실험결과 연구대상자들의 알파파가 증가하고 베타파가 감소하는 현상이 통계적으로 유의미하게 나타났으며 초고주파현상이 반영되는 결과가 나타났다.

• Ocean and Polar Research
• /
• 제29권2호
• /
• pp.113-121
• /
• 2007

The sound wave in the sea propagates under the effect of water depth, sound speed structure, sea surface roughness, bottom roughness, and acoustic properties of bottom sediment. In shallow water, the bottom sediments are distributed very variously with place and the sound speed structure varying with time and space. In order to investigate the seasonal propagation characteristics of low-frequency sound wave in the Yellow Sea, propagation experiments were conducted along a track in the middle part of the Yellow Sea in spring, summer, and autumn. In this paper we consider seasonal variations of the sound speed profile and propagation loss based on the measurement results. Also we quantitatively investigate variation of bottom loss by dividing the propagation loss into three components: spreading loss, absorption loss, and bottom loss. As a result, the propagation losses measured in summer were larger than the losses in spring and autumn, and the propagation losses measured in autumn were smaller than the losses in spring. The spreading loss and the absorption loss did not show seasonal variations, but the bottom loss showed seasonal variations. So it was thought that the seasonal variation of the propagation loss was due to the seasonal change of the bottom loss and the seasonal variation of the bottom loss was due to the change of the sound speed profile by season.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.144-151
• /
• 2006

Sound generated from a moving vehicle often carries information on the condition of vehicle, for example, whether it has faults or not, where the fault exists. The latter is possible especially by MFAH(moving frame acoustic holography) and beamforming method. MFAH is applicable to the sound source of pure tone or narrow band noise. For the beamforming method, we have to know what kind of wave the sound source radiates, for example, plane wave or spherical wave. That is, whether the above methods are applicable depends on the characteristics of sound source. To apply these methods to the fault detection, we have to know the characteristics of wave from faults. In this research, a machine diagnosis technique based on the above holographic approaches is introduced to find the position of faults. The signal due to faults is modeled based on the fact that the faults radiate impulsive noise, and analyzed in time and frequency domain. The way how MFAH and beamforming method can be used is introduced to find the position of source.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.

• 한국광학회지
• /
• 제32권3호
• /
• pp.108-113
• /
• 2021

본 논문에서는 어떤 음원에 의하여 진동하는 물체로부터 그 음원의 소리를 레이저 도플러 간섭계를 이용하여 원거리에서 복원하는 방법을 고안하고 실험적으로 시연하였다. 어떤 음파에 의하여 진동하는 물체를 간섭계를 통하여 측정할 경우, 측정되는 간섭계의 주파수는 도플러 효과에 의하여 그 소리의 주파수와 동일하게 변한다. 이 현상을 이용하여 어떤 소리에 영향을 받는 대상의 진동 주파수를 레이저 도플러 간섭계를 통해 원거리에서 실시간으로 측정하고, 간섭계 출력의 최대 주파수를 추적하는 신호처리를 통하여 얻은 결과가 음원의 소리와 같은 주파수 특성을 갖는다는 것을 실험적으로 확인하였다. 또한, 각각의 단일 톤 음원뿐만 아니라 여러 가지 주파수가 혼합된 음원의 복원도 가능함을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제24권5호
• /
• pp.453-458
• /
• 2003

압전식 쇄석기를 이용하여 충격파를 대상물에 조사할 때 들리는 소리의 발생지가 바로 충격당하는 대상물이란 사실을 실험을 통하여 확인하였다. 하이드로폰과 소리가 발생되는 음원과의 거리 및 방위각을 추정함으로써 방사음의 위치를 추정하는 방법을 이용하였으며, 센서로서는 한 개의 하이드로폰을 사용하였다. 또한, 진동 특성이 뚜렷한 금속모델을 대상물로 선정하여 그 대상물로부터의 방사음과 진동과의 관계를 조사한 결과를 제시하여, 방사음이 대상물에 관한 정보를 포함하고 있다는 사실을 보다 명백히 검증하였다.