• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.101-107
• /
• 1997

In order to detect and suppress chatter in turning process, a stability control methodology was studied through manipulation of spindle speeds regarding to chatter frequencies, The chatter frequency was identified by monitoring and signal processing of sound pressure during turing on a lathe. The stability control methodology can select stable spindle speeds without knowing a prior knowledge of machine compliances and cutting dynamics. Reliability of the developed stability control methodology was verified through turing experiments on an engine lathe. Experimental results show that a microphone is an excellent sensor for chatter detection and control .

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.227-236
• /
• 2020

Underwater acoustics, which is the domain that addresses phenomena related to the generation, propagation, and reception of sound waves in water, has been applied mainly in the research on the use of sound navigation and ranging (SONAR) systems for underwater communication, target detection, investigation of marine resources and environment mapping, and measurement and analysis of sound sources in water. The main objective of remote sensing based on underwater acoustics is to indirectly acquire information on underwater targets of interest using acoustic data. Meanwhile, highly advanced data-driven machine-learning techniques are being used in various ways in the processes of acquiring information from acoustic data. The related theoretical background is introduced in the first part of this paper (Yang et al., 2020). This paper reviews machine-learning applications in passive SONAR signal-processing tasks including target detection/identification and localization.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.399-402
• /
• 1996

The electrodynamic loudspeakers should have a wide dynamic range to reproduce various sound levels. When the input signal is small, the radiated sound from the loudspeaker is not so much distorted. However, for large input signal with low frequency component the radiated sound is significantly distorted due to the nonlinearities of the loudspeaker. The suspension, damping, and magnetic flux of loudspeaker are the main sources of the nonlinearity. Such electromechanical parameters related to harmonic distortion have been represented by a polynomial model for diaphragm displacement, while each of the polynomial coefficient is evaluated by using the principle of harmonic balance experimentally. Based on the polynomial model, we designed a compensator for nonlinear harmonic distortion of direct radiator loudspeaker. Than observer is used to estimate the displacement of the loudspeaker diaphragm, which is rather difficult to measure directly in the conventional setting. The usefulness of the designed compensator is demonstrated by numerical simulations. Simulation results show about 30db decrease at the second and third higher harmonic distortions. We carry out an experiment on speaker to verify designed controller and nonlinear observer.

• The Journal of the Acoustical Society of Korea
• /
• 제25권1E호
• /
• pp.8-13
• /
• 2006

In this paper, an Optimized Ambisonic Panning Algorithm (OAPA) which reduces sound localization error, is proposed. In the conventional Ambisonic Panning Algorithm (APA), sound localization is usually different from the panning angle, especially when listeners are not in an ideal listening position, because of low signal separation among other channels. To overcome this problem, an OAPA using window functions is proposed. A proper window function can be verified, comprising of higher harmonic components than 2M+1 and improved DPC and channel separation. Analysis results demonstrate that the proposed method results in higher signal separation among other channels and lower sound localization errors than the conventional APA.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.108-114
• /
• 2017

Lip reading is a field of image processing to assist the process of sound recognition. In some environment, the capture of sound signal usually has significant noise and therefore, the recognition rate of sound signal decreases. Lip reading can be a good feature for the increase of recognition rates. Conventional lip extraction methods have been proposed widely. Maia et. al. proposed a method by the sum of Cr and Cb. However, there are two problems as follows: the point with maximum saturation is not always regarded as lips region and the inner part of lips such as oral cavity and teeth can be classified as lips. To solve these problems, this paper proposes a method which adopts the histogram-based classifier for the extraction of lips region. The proposed method consists of two stages, learning and test. The amount of computation is minimized because this method has no color conversion. The performance of proposed method gives 66.8% of detection rate compared to 28% of conventional ones.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.156-162
• /
• 1998

The whistle is a very important information source for the safety navigation under foggy weather. But navigator has no concern about this , because it must be achieved by human hearing sense and considered as a vague signal. If the range and relative bearing of signa source can be detected automatically, it would be very useful system for preventing marine casualties making a lot of economic loss and environment pollution. Before the algorithm of 2-dimensinal sound source tracking system was reported . This paper describes the method that can obtain thetime lag between three signas and the theory of cross-correlation analysis and subtraction method for cauculating the time lag by using the digital signal data sequences. And a series of experiments were carried out for various position of sound source in the range from 200m to 530cm.

• 한국항해항만학회지
• /
• 제28권2호
• /
• pp.135-140
• /
• 2004

A purpose of developing a sound source tracking system in this paper is to reduce the noise efficiently from the received signal by microphone array and measure the signal's time delay between the microphones. I have applied the wavelet analysis algorithm to the system and calculated the sound source's relative position For the performance evaluation, I have compared with the results of utilizing the digital filtering methods based on the FIR LPF using Kaiser window function and the inverse Chebyshev IIR LPF. As a result, I have confirmed the fact that 'time-scale' filter using inverse discrete wavelet transform was suitable for this system.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.82-88
• /
• 2003

The nondestructive internal quality evaluation of agricultural products has been strongly required from the needs for individual inspection. Recently, the ultrasonic wave has been considered as a solution fur this problem, and an ultrasonic system was constructed for the ultrasonic NDE of fruits and vegetables in our previous work. In this paper, the practical applicability of our ultrasonic system is tested fur the inspection of internal defects (central cavity) in Atlantic potato. Sound speed and RMS of transmitted ultrasonic wave signal were measured and classification algorithm using 2 dimensional stochastic analysis. was presented. Experimental results showed greater value of sound speed and RMS (root mean square) of transmitted signal in normal samples than in abnormal samples with cavity. Also a stochastic method to distinguish normal and abnormal showed fault detection rate less than 5%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.545-550
• /
• 2005

A parametric loudspeaker is a device to generate highly directional sound using ultrasounds. The parametric loudspeaker could be used to focus sound in a limited space, so it is important to study the characteristics of the parametric loudspeaker in near-field. Mechanism of the audible sound generation in the parametric loudspeaker is explained by nonlinear interaction of the ultrasounds and is modeled as KZK equation, the nonlinear wave equation which contains attenuation, nonlinearity and diffraction. To measure the directional characteristics of the parametric loudspeaker precisely, a method to reduce the spurious signal which taints the measured signal was invented. With the method, directivity patterns of the parametric loudspeaker were measured and compared to the approximated solution and piston sources.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.50-57
• /
• 1997

In order to make unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for chatter, tool wear and breakage during turning operation. To develop economic sensing and identiffication methods for turning processes, sound pressure measurement and digital signal processing technique were proposed. We suppressed chatter by stability control methodology, which was studied through manipulation of spindle speeds regarding to chatter frequencies. It was shown that tool wear and fracture were identified and to be estimated by using the wear indices. The validity of the proposed system was confirmed through the large number of cutting tests.