• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.2
• /
• pp.83-91
• /
• 2003

Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.61-67
• /
• 2004

This paper suggests two simple two-degree-of-freedom models to describe the dynamical interaction between the pad and the disc of a disc brake system. Separate models for in-plane and out -of-plane vibration are described. Although a brake pad and disc have many modes of vibration, the interaction between a single mode of each component is considered as this is thought to be crucial for brake noise. For both models, the pad and the disc are connected by a sliding friction interface having a velocity dependent friction coefficient. In this paper, it is shown that this friction model acts as negative damping in the system that describes the in-plane vibration, and as negative stiffness in system that describes the out-of-plane vibration. Stability analysis is performed to investigate the conditions under which the systems become unstable. The results of the stability analysis show that the damping is the most important parameter for in-plane vibration, whereas the stiffness is the most important parameter for the out-of-plane vibration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1235-1241
• /
• 2001

Pantograph design process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore Pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings (FW-H) equation is used to calculate the flow induced sound pressure level. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25m away from panhead contact strips. Based on aerodynamic (CFD) and aeroacoustic (FW-H) analysis data, the optimal sizing and positioning ofpanhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. Using a parameter design procedure associated with signal-to-noise (SIN) ratio and sensitivity analysis, an optimal level of design parameters are extracted to minimize the disconnection ratio between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.150-155
• /
• 2000

This paper presents phenomena of vibration and noise due to acoustic resonance in tube bank of a power plant. Acoustic resonance is may arise when the vortex shedding frequency coincides with the acoustic natural frequency. At the resonance, the value of vibration in this system was 595 ${\mu}m$, p-p and the sound pressure level was maximum 103 dBA. And the resonance frequency was found to be 35 Hz. When the difference of vortex shedding frequency and acoustic natural frequency is within ${\pm}20%$, acoustic resonance is possible. In this system, the difference of these frequencies was 1.8%. We can evaluate the possibility of acoustic resonance by using damping parameter. We did eliminate acoustic resonance by installing baffle in tube bank. After installing baffle, the level of vibration and noise was reduced dramatically.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.241-250
• /
• 2023

In this paper, when using the LMS algorithm for adaptive ultrasonic beamforming system, the effect of initial value setting on the margin of step parameters was studied. To this end, quasi-ideal beams, rotational beams with arbitrarily set beam widths were used as examples. In the numerical simulations, an arbitrary initial value(the number of sound sources fixed to any number) was set in the ultrasonic beamforming system, and the margin of the step parameter and convergence characteristics thereof were compared.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.49-60
• /
• 1995

This paper is a study on the design and implementation of the Korean Text-to-Speech system which is used for a small and simple system. In this paper, a parameter synthesis method is chosen for speech syntheiss method, we use PARCOR(PARtial autoCORrelation) coefficient which is one of the LPC analysis. And we use phoneme for synthesis unit which is the basic unit for speech synthesis. We use PARCOR, pitch, amplitude as synthesis parameter of voice, we use residual signal, PARCOR coefficients as synthesis parameter of unvoice. In this paper, we could obtain the 60% intelligibility by using the residual signal as excitation signal of unvoiced sound. The result of synthesis experiment, synthesis of a word unit is available. The controlling of phoneme duration is necessary for synthesizing of a sentence unit. For setting up the synthesis system, PC 486, a 70[Hz]-4.5[KHz] band pass filter for speech input/output, amplifier, and TMS320C30 DSP board was used.

• Korean Journal of Cleft Lip And Palate
• /
• v.5 no.2
• /
• pp.95-108
• /
• 2002

언어 발달의 조기 단계를 이해하기 위한 일환으로 crying은 언어전 발달의 기초 단계로서 여러 학문적 분야에서 많은 연구가 있어왔다. 그러나 구순구개열(CLP))환아의 경우는cry-producing/control mechnism에 variation이 많은 이유로 이 분야의 연구는 거의 없는 실정이다. 이에 본 연구에서는 다음과 같은 의문점을 가지고 CLP환아의 cry feature에 대한분석을 하였다. 첫째, 정상아와 CLP환아의 cry에 전형적인 차이가 있는가? 둘째, CLP환아의 술전, 술후 cry feature에 변화가 있는가? 셋째, cry분석이 CLP환아의 이후 speech disorder에 대한 언어전 평가로서의 가치가 있는가? 넷째, 특정 parameter가 언어전 평가에 적절한 도구로 작용할 수 있는가? 생후 15개월 이내의 CLP 환아 3명과 유사한 나이대의 정상아 8명의 cry에 대한 공기역학 및 음향음성학적 분석을 통해 CLP 환아와 정상아, CLP환아의 술전, 술후 cry특성을 비교 분석하였다. 결과는 다음과 같다. 1 공기역학적 분석 1) airflow는 CLP 환아의 경우 정상아보다 약간 높았고 술 후 약간 증가하였다. 2)폐활량을 나타내는volume에서는 정상아보다 술전 CLP환자의 경우 보상적으로 더 큰 수치를 보였고 술후 약간 증가하였다. 3)강도를 나타내는 parameter(SPL)에서는 정상아 보다 술전 CLP환자의 계측치가 약간 작았으나 술 후 증가하는 양상을 보였다. 2. 음향음성학적 분석 1)기저 주파수 분석시 정상아에 비해 술 전 CLP환자의 경우 계측치가 약간 낮았으나 술 후 증가하여 정상군의 계측치에 근접하였다. 2)강도를 나타내는energy 측정시 정상아에 비해 술 전 CLP계측치가 보상성으로 약간 큰수치를 나타내었고 술 후 약간 더 증가하였다. 3) Shimmer에서는CUI환자의 술후계측치가술전에 비해 현저히 감소하여 정상군의 수치에 근접하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.6
• /
• pp.106-118
• /
• 1998

The study concerns a design procedure of rule-based systems. The proposed rule-based fuzzy modeling implements system structure and parameter identification in the efficient from of "IF..., THEN..." statements, and exploits the theory of system optimization and fuzzy implication rules. The method for rule-based fuzzy modeling concerns the from of the conclusion part of the the rules that can be constant. Both triangular and Gaussian-like membership function are studied. The optimization hinges on an autotuning algorithm that covers as a modified constrained optimization method known as a complex method. The study introduces a weighted performance index (objective function) that helps achieve a sound balance between the quality of results produced for the training and testing set. This methodology sheds light on the role and impact of different parameters of the model on its performance. The study is illustrated with the aid of two representative numerical examples.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1988-1993
• /
• 2008

Photovoltaic (PV) modules operate over a large range of conditions but manufacturer's information is not sufficient to determine their overall performance. Designers need a reliable tool to predict energy production from a photovoltaic module under all conditions in order to make a sound decision. The modeling method of photovoltaic (PV) module are useful to perform detailed analysis of PV system performance for changing meteorological conditions, verify actual rated power of PV system sizing and determine the optimal design of PV system and components. This paper indicates a modeling approach of PV module performance in terms of meteorological conditions and identifies validity of PV modules modeling by comparing measured with simulated value.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.921-926
• /
• 2005

In the idealized model problem of the interaction between a planar travelling shock and a symmetric vortex, the physics of shock distortion and quadrupole sound generation are well known to many researchers. However, the authors have distinguished the weak waves reflected and transmitted by the complicated photograph images obtained from a shock tube experiment. In this paper, we introduces a parametric study based on Navier-Stokes simulation and Rankin vortex model to see the difference of shock deformation shapes. Four combination of the strength of shock and vortex are respectively selected from a parameter plane of shock and vortex strength extended to the strong vortex region. The result shows clearly discernable wave morphology for the main parameters, which is not yet explicitly mentioned by other researchers.