• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.506-509
• /
• 2006

Shaped Sound Focusing is defined as the generation of acoustically bright shape in space using multiple sources. The acoustically bright shape is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustical focusing is essential because acoustic energy is very small to use other type of energy. Practically, focused sound shape control not a point is meaningful because there are so many needs to enlarge the focal region especially in clinical uses and others. If focused sound shape can be controlled, it offers various kinds of solutions for clinical uses and others because a regional focusing is essentially needed to reduce a treatment time and enhance the performance of transducers. For making the shaped-sound field, control variables, such as a number of sources, excitation frequency, source positioning, etc., should be taken according to geometrical sound shape. To verify these relations between them, wavenumber domain matching method is suggested because wavenumber spectrum can provide the information of control variables of sources. In this paper, the procedures of shaped sound focusing using wavenumber domain matching and relations between control variables and geometrical sound shape are covered in case of an acoustical ring.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1398-1403
• /
• 2003

In this paper, a simple method to design an MIMO sound field control system was proposed. The control system was designed to achieve 1) noise attenuation and 2) sound equalization by utilizing feedback and feedforward controllers. The method was based on partial model matching on frequency domain which only required measured frequency response data, or impulse response data in order to tune parameters of the controller. The proposed method was applied to a normal office room and results of experiment showed effectiveness of the proposed method.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.374-379
• /
• 2018

The piezocomposite transducer is widely used because it is highly efficient in transforming electric energy into mechanical energy, and its frequency range is broader than that of other types of ultrasound transducers. A general piezocomposite transducer is composed of an acoustic lens, impedance matching layers, piezoelectric materials, and backing layers. When an input voltage is applied to a piezoelectric material as an active material, it generates sound waves while vibrating. At that time, an impedance matching layer helps the sound waves to propagate forward while reducing the impedance mismatch that may occur at the interface between the active material and its front material. The impedance mismatch has a negative effect on the signal of an ultrasound transducer; thus, it is important to design a matching layer to overcome the issue. In this study, an optimized feature of a matching layer with gradient properties is studied. An objective function is defined to minimize both the average and the deviation of the reflection coefficients that are functions of the frequencies. As a result, an improvement in the signal characteristics with respect to the sensitivity and bandwidth is reported.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.357-360
• /
• 2023

본 논문에서는 거품 입자의 물리적 속성을 활용하여 가상 시뮬레이션 장면에 맞는 거품 사운드를 합성하고 사운드의 물리적 현상을 기반으로 사운드의 크기를 효율적으로 제어할 수 있는 기법을 제안한다. 현실에서는 사운드의 근원지와 청중의 위치 관계에 따라 사운드 크기의 차이가 나타타는 것을 쉽게 관찰할 수 있다. 본 논문에서는 이 문제를 효율적으로 풀어내기 위해 복잡한 3차원 유체의 움직임을 분석하는 게 아닌, 2차원으로 투영된 입자의 유동을 분석하여 사운드를 합성하고 제어하는 방식을 소개한다. 우리의 방법은 거품 사운드의 크기를 효율적으로 조절할 수 있도록 스크린 공간에서 계산된 거품 입자의 속도와 위치를 활용하여 청중의 위치 관계 및 사운드의 방향성을 확인하고, 이를 통해 거품 사운드를 사실적으로 합성하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1014-1017
• /
• 2007

Sound focusing technologies has been studied for various purposes from early 1990s. As a result, these technologies make us possible to apply in many uses. For example, we can treat tumors using focused ultrasonic waves without surgical knife and communicate in the ocean using time reversal array. Also applications for personal audio system become issues. Recently, as technologies are developing, in some applications, needs for regional focusing become increasing because previously suggested focusing methods, such as phase conjugation, time reversal and inverse filtering, were all about a point focusing. Therefore, studies on regional focusing method are essentially needed. Regional focusing method was firstly mentioned by Choi and Kim in 2002: acoustic contrast control. However, in regional focusing, physical interpretations between control variables and results are still not easy because of its complexity. In this regard, we tried to understand the relations between control variables and results in wavenumber domain and suggested a solution method for regional focusing: wavenumber spectrum matching. We also showed how to make spatially focused sound shape using the suggested method from the simplest case: line focusing.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.69-78
• /
• 2010

Spectral modeling synthesis (SMS) has been used as a powerful tool for musical sound modeling. This technique considers a sound as a combination of a deterministic plus a stochastic component. The deterministic component is represented by the series of sinusoids that are described by amplitude, frequency, and phase functions and the stochastic component is represented by a series of magnitude spectrum envelopes that functions as a time varying filter excited by white noise. These representations make it possible for a synthesized sound to attain all the perceptual characteristics of the original sound. However, sometimes considerable phase variations occur in the deterministic component by using the conventional SMS for the complex sound such as whale sounds when the partial frequencies in successive frames differ. This is because it utilizes the calculated phase to synthesize deterministic component of the sound. As a result, it does not provide a good spectrum matching between original and synthesized spectrum in higher frequency region. To overcome this problem, we propose a modified SMS that provides good spectrum matching of original and synthesized sound by calculating complex residual spectrum in frequency domain and utilizing original phase information to synthesize the deterministic component of the sound. Analysis and simulation results for synthesizing whale sounds suggest that the proposed method is comparable to the conventional SMS in both time and frequency domain. However, the proposed method outperforms the SMS in better spectrum matching.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.375-388
• /
• 2022

This paper deals with the process of obtaining sound transmission loss of a cylindrical silencer lined with multi-layered poroelastic sound absorbing materials. The Biot model and the Johnson-Champoux-Allard-Lafarge (JCAL) model were used to deal with waves propagating in multi-layered poroelastic materials. The boundary conditions required for analysis of the silencer were obtained and the numerical process of finding modes was explained. A numerical experiment was conducted on the 2-layered silencer using the modes and the transmission loss converged with the first 12 modes. Finally, the mode matching method proposed in this research was validated by being compared with the results calculated from Finite Element Method (FEM) about different kinds of sound absorbing materials.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.1-12
• /
• 2022

As the music streaming service and the Hi-Fi market grow, various audio devices are being released. As a result, consumers have a wider range of product choices, but it has become more difficult to find products that match their musical tastes. In this study, we proposed a system that extracts the vocal component from the user's preferred sound source and recommends the most suitable audio device to the user based on this information. To achieve this, first, the original sound source was separated using Python's Spleeter Library, the vocal sound source was extracted, and the result of collecting frequency band data of manufacturers' audio devices was shown in a grid graph. The Matching Gap Index (MGI) was proposed as an indicator for comparing the frequency band of the extracted vocal sound source and the measurement data of the frequency band of the audio devices. Based on the calculated MGI value, the audio device with the highest similarity with the user's preference is recommended. The recommendation results were verified using equalizer data for each genre provided by sound professional companies.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1363-1366
• /
• 2003

This paper introduces computerized version of Hangout(Korean Language) Standard Pronunciation Rule that can be used in Korean processing systems such as Korean voice synthesis system and Korean voice recognition system. For this purpose, we build Petri net models for each items of the Standard Pronunciation Rule, and then integrate them into the vocal sound conversion table. The reversion of Hangul Standard Pronunciation Rule regulates the way of matching vocal sounds into grammatically correct written characters. This paper presents not only the vocal sound conversion table but also character conversion table obtained by reversely converting the vocal sound conversion table. Making use of these tables, we have implemented a Hangeul character into a vocal sound system and a Korean vocal sound into character conversion system, and tested them with various data sets reflecting all the items of the Standard Pronunciation Rule to verify the soundness and completeness of our tables. The test results shows that the tables improves the process speed in addition to the soundness and completeness.

• Language and Information
• /
• v.7 no.2
• /
• pp.81-101
• /
• 2003

This paper introduces a computerized version of the Korean Standard Pronunciation Rules that can be used in speech engineering systems such as Korean speech synthesis and recognition systems. For this purpose, we build Petri net models for each item of the Standard Pronunciation Rules, and then integrate them into the sound conversion table. The reversion of the Korean Standard Pronunciation Rules regulates the way of matching sounds into grammatically correct written characters. This paper presents not only the sound conversion table but also the character conversion table obtained by reversely converting the sound conversion table. Malting use of these tables, we have implemented a Korean character into a sound system and a Korean sound into the character conversion system, and tested them with various data sets reflecting all the items of the Standard Pronunciation Rules to verify the soundness and completeness of our tables. The test results show that the tables improve the process speed in addition to the soundness and completeness.