• 한국안전학회지
• /
• 제20권2호
• /
• pp.6-10
• /
• 2005

With the rapid industrial development, railways have become a main traffic means of transportation. However, rail traffic noise and vibration have become a major problem in urban areas which is a very serious issue for the living environment. Especially, railway noise induced by rail operations has influenced on the residents living near railway tracks. The purpose of this paper is to investigate the Raynoise modeling in railway applications. Generally, my acoustics have been used to investigate the effectiveness of noise barriers in railway applications and barriers are modeled using the commercial software Raynoise. A-weighted sound pressure level have been measured at six locations, 4m from the track and are compared with experimental values. Based on the analysis of the results, Comparison between numerical and experimental values are within 1dB (A). Also, when a train is m through the Raynoise modeling, the general influential sphere of railway noise can be determined. Therefore, this study will be using basic data in establishing effective railway noise prevention plans far the future. Also, we could know that is applicable of Raynoise modeling at railway noise.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.121-125
• /
• 2003

스위치 박스는 건축물의 전선관용으로 사용되는 금속제 박스이다. 이 박스를 제조할 때는 제 1차 프레스에서 성형을 하고, 제 2차∼5차 프레스로 박스의 4측면 가공을 하게 되므로 프레스 4대, 금형 4벌, 작업자 4명을 필요로 한다. 이 때문에 기계 사용료와 금형비, 인건비 등 제조원가의 상승 요인이 되고 있으며 특히 프레스의 굉음과 진동 및 안전사고의 위험성 등으로 작업자들이 직무를 기피하고 있다. 이러한 현상을 해소하기 위하여 금형 4벌에 의한 가공을 1벌의 금형에 통합시킨 캠금형 개발과 자동이송장치를 개발하였다 그 결과, 프레스 1대와 금형 1벌로 무인화 작업을 할 수 있게 되어 직무기피요인을 해소하게 되고 제조원가 절감효과를 얻게 되었다.

• 소음진동
• /
• 제9권4호
• /
• pp.841-848
• /
• 1999

직류 모터의 생산 공정품질 확인 작업에 있어서 전체 소음레벨이 합격점에 이른다 할지라도 관능 평가시의 이음으로 인해 불량판정을 받게되는 경우가 있다. 이런 종류의 문제는 가공 또는 조립 공정상에서 발생될수 있는데 본 눈문에서는 과도기적 스펙트럴 분석 혹은 시간-주파수 분석 기법을 소음품질 문제에 적용해 보았다.Case Study로써 윈드쉴드 와이퍼 모터의 이음 발생원이 상세 분석되었으며, 결과적으로 정상적인 주파수 분석에서 발견되지 않았던 아마추어 축의 불량이 충격소음을 일으킨것으로 밝혀졌다. 이를 통해 회전체-기어 시스템의 이음 원인규명을 위한 시간-주파수 분석 기법의 효과적 활용이 잘 나타났다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.173-178
• /
• 2000

Subjective correspondence among visual variables, auditory variables and vibratory feedback to a hand was experimentally examined to improve usability of a remote controller. First, we studied the correspondence among visual variables represented on a screen or auditory variables and the duration of vibratory stimulus to the subjects' hand by subjective evaluation. Subjective rating method was used in ten items; suitability, comprehensibility, ease-to-use, naturalness, variety, activity, usualness, interest, wish-to-use and feeling of pleasure. Second, to show the effects of multi-modal interface using visual sense, the sense of auditory and vibratory sense, we combined positive stereotype of visual variables and auditory variables provided with the first experiment. The results showed some stereotype between visual variables or auditory variables and duration of vibratory stimulus. Some of the variables such as size, direction of motion, hue, brightness of color and volume of sound had high correspondence with the duration of vibration.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.36-41
• /
• 2013

This paper is development of single-phase brushless DC motor with outer rotor for ventilation fan. Cogging torque causes the noise vibration to greatest impact on ventilation fan. Asymmetric notches are applied to tapered-teeth for cogging torque reduction of single-phase brushless DC motor. Initial model is notchless and proposed model is applied 2 asymmetric notches. The proposed method is proved motor characteristic through finite element analysis(FEA). Also, experimental results verify that the proposed model considerably reduces cogging torque and have the good sound quality in ventilation system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.331-334
• /
• 2006

Air foil bearings have been attempted for application to industrial turbo machines, since they have several advantages over oil bearings in terms of endurance, simplicity, environment-friendliness, efficiency, sound and vibration, and small turbo machines with air foil bearings are in the market as the result. Recently, researches on widening the application spectrum of air foil bearings are in progress worldwide. In this paper, a 300 HP class turbo blower using air foil bearings is introduced. The turbo blower has a high speed PMSM(Permanent Magnet Synchronous Motor) driving a compressor, and air flow rate is designed to be $180\;m^3/min$ at pressure ratio of 1.6. The maximum rotational speed is set to 17,000 RPM to maximize the total efficiency with the result that the weight of rotor assembly is 26kg, which is expected to be the largest turbo machine with air foil bearings ever developed in the world.

• 한국주조공학회지
• /
• 제30권1호
• /
• pp.22-28
• /
• 2010

Metal foam is a porous or cellular structure material and representative property is a very high porosity. Foamed materials have very special properties such as sound, vibration, energy and impact absorption capacity. Especially this properties are widely used for safety demands of architecture, auto and aircraft industry. But metal foam need to increased its compression strength and hardness. This study were researched about Al-Si alloy foams with variation amount of Si contents for their fabrication and properties such as porosity, cell structure, microstructure and mechanical properties. The result are that the range of pore size is 2~4 $mm{\phi}$, the high porosity are 88%, high yield strength is 1.8MPa, the strain ratio is 60~70% and vickers hardness is 33.1~50.6.

• 소음진동
• /
• 제8권5호
• /
• pp.870-878
• /
• 1998

The cross-flow fan which constitutes a fan-duct system with a stabilizer and a scroll casing is widely used in many air-ventilating and air-conditioning devices. Its ooperating points of high efficiency and loading conditions frequently induce a annoying sharp tonal component of discrete frequency on the noise spectrum, which is open called as a BPF(Blade-Passing-Frequency) noise and degrades the sound quality of the devices. this BPF tone has been one of the defects of the cross-flow fan. This study proposes two methods in order to reduce this tonal noise component, which are the random distributions of the fan blades and the skewed shapes of the stabilizer. The proposed methods are verified by a simple analytical model and are applied in manufacturing the cross-flow fan and the stabilizer samples. Some experiments are carried out to verify the reduction capability of BPF tones of above two schemes and the experimental results are analyzed. The comparison between two method is also carried out.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.80-89
• /
• 2005

In this paper, time-frequency analysis using wavelet packet transform and advanced-MDSA (Multiple Dimensional Spectral Analysis) which based on wavelet packet transform is applied fur fault source identification and diagnosis of early detection of fault non-stationary sound/vibration signals. This method is analyzing the signal in the plane of instantaneous time and instantaneous frequency. The results of ordinary coherence function, which obtained by wavelet packet analysis, showed the possibility of early fault detection by analysis at the instantaneous time. So, by checking the coherence function trend, it is possible to detect which signal contains the major fault signal and to know how much the system is damaged. Finally, It is impossible to monitor the system is damaged or undamaged by using conventional method, because crest factor is almost constant under the range of magnitude of fault signal as its approach to normal signal. However instantaneous coherence function showed that a little change of fault signal is possible to monitor the system condition. And it is possible to predict the maintenance time by condition based maintenance for any stationary or non-stationary signals.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.